topbanner_forum
  *

avatar image

Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
  • Tuesday April 16, 2024, 12:31 am
  • Proudly celebrating 15+ years online.
  • Donate now to become a lifetime supporting member of the site and get a non-expiring license key for all of our programs.
  • donate

Last post Author Topic: Software for planning wood bookcases/cabinets/tables etc?  (Read 216826 times)

Shades

  • Member
  • Joined in 2006
  • **
  • Posts: 2,922
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #300 on: March 10, 2019, 11:57 PM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

Target

  • Honorary Member
  • Joined in 2006
  • **
  • Posts: 1,832
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #301 on: March 11, 2019, 03:06 AM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon

Shades

  • Member
  • Joined in 2006
  • **
  • Posts: 2,922
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #302 on: March 11, 2019, 07:34 AM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

tomos

  • Charter Member
  • Joined in 2006
  • ***
  • Posts: 11,959
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #303 on: March 11, 2019, 08:06 AM »
Screenshot_20190311-140503.pngSoftware for planning wood bookcases/cabinets/tables etc?
screenshot :D
Tom

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #304 on: March 11, 2019, 10:34 AM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

wraith808

  • Supporting Member
  • Joined in 2006
  • **
  • default avatar
  • Posts: 11,186
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #305 on: March 11, 2019, 10:42 AM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

Only a third of it.

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #306 on: March 11, 2019, 02:22 PM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

Only a third of it.

This conversation's spark is fading, so wire you giving it more continuity?

cranioscopical

  • Friend of the Site
  • Supporting Member
  • Joined in 2006
  • **
  • Posts: 4,776
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #307 on: March 11, 2019, 02:32 PM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

Only a third of it.

This conversation's spark is fading, so wire you giving it more continuity?

I can't tell—do you approve of such conduct or not?
« Last Edit: March 11, 2019, 02:38 PM by cranioscopical »

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #308 on: March 11, 2019, 03:03 PM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

Only a third of it.

This conversation's spark is fading, so wire you giving it more continuity?

I can't tell—do you approve of such conduct or not?
-cranioscopical (March 11, 2019, 02:32 PM)

I feel a need to insulate myself from that line of questioning.
« Last Edit: March 11, 2019, 03:11 PM by skwire »

Target

  • Honorary Member
  • Joined in 2006
  • **
  • Posts: 1,832
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #309 on: March 11, 2019, 06:52 PM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

Only a third of it.

This conversation's spark is fading, so wire you giving it more continuity?

I can't tell—do you approve of such conduct or not?
-cranioscopical (March 11, 2019, 02:32 PM)

I feel a need to insulate myself from that line of questioning.

then watt will you do?

wraith808

  • Supporting Member
  • Joined in 2006
  • **
  • default avatar
  • Posts: 11,186
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #310 on: March 11, 2019, 07:38 PM »
rule of thumb, no one should ever touch electricity...

Shocking revelation, that.

That lightning wit on display, eh?

These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

That comment really Hertz.

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...


AC your problem.  ;D

Un-phased by all of this...

Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

Or he lets us go on by extension, cord-ially....

could go either way, though I fully expect him to arc up soon


Would we want to have him amp up about this?

The mains part of this powerful conversation sure went off the rail, didn't it?

Only a third of it.

This conversation's spark is fading, so wire you giving it more continuity?

I can't tell—do you approve of such conduct or not?
-cranioscopical (March 11, 2019, 02:32 PM)

I feel a need to insulate myself from that line of questioning.

then watt will you do?

I personally volt that we end this now.

Target

  • Honorary Member
  • Joined in 2006
  • **
  • Posts: 1,832
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #311 on: March 11, 2019, 09:28 PM »
rule of thumb, no one should ever touch electricity...
Shocking revelation, that.
That lightning wit on display, eh?
These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)
Ohm my word, I knew you all wouldn't be able to resist.
That comment really Hertz.
And so it should! After all, we are discussing the crown joules of mouser's demesne.
-cranioscopical (March 08, 2019, 02:46 PM)
I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.
We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)
come on guys, try to remember this is a DC forum...
AC your problem.  ;D
Un-phased by all of this...
Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)
pretty sure you guys have ground about as much as you can out of this
No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.
Or he lets us go on by extension, cord-ially....
could go either way, though I fully expect him to arc up soon
Would we want to have him amp up about this?
The mains part of this powerful conversation sure went off the rail, didn't it?
Only a third of it.
This conversation's spark is fading, so wire you giving it more continuity?
I can't tell—do you approve of such conduct or not?
-cranioscopical (March 11, 2019, 02:32 PM)
I feel a need to insulate myself from that line of questioning.
then watt will you do?
I personally volt that we end this now.

Come on Wraith, stay on the bus!

Shades

  • Member
  • Joined in 2006
  • **
  • Posts: 2,922
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #312 on: March 11, 2019, 10:22 PM »
rule of thumb, no one should ever touch electricity...
Shocking revelation, that.
That lightning wit on display, eh?
These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)
Ohm my word, I knew you all wouldn't be able to resist.
That comment really Hertz.
And so it should! After all, we are discussing the crown joules of mouser's demesne.
-cranioscopical (March 08, 2019, 02:46 PM)
I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.
We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)
come on guys, try to remember this is a DC forum...
AC your problem.  ;D
Un-phased by all of this...
Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)
pretty sure you guys have ground about as much as you can out of this
No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.
Or he lets us go on by extension, cord-ially....
could go either way, though I fully expect him to arc up soon
Would we want to have him amp up about this?
The mains part of this powerful conversation sure went off the rail, didn't it?
Only a third of it.
This conversation's spark is fading, so wire you giving it more continuity?
I can't tell—do you approve of such conduct or not?
-cranioscopical (March 11, 2019, 02:32 PM)
I feel a need to insulate myself from that line of questioning.
then watt will you do?
I personally volt that we end this now.

Come on Wraith, stay on the bus!

I'm feeling sad for Wraith, his message won't relay.

wraith808

  • Supporting Member
  • Joined in 2006
  • **
  • default avatar
  • Posts: 11,186
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #313 on: March 11, 2019, 11:07 PM »
rule of thumb, no one should ever touch electricity...
Shocking revelation, that.
That lightning wit on display, eh?
These kinds of remarks are a bit of a jolt!
-cranioscopical (March 08, 2019, 08:21 AM)
Ohm my word, I knew you all wouldn't be able to resist.
That comment really Hertz.
And so it should! After all, we are discussing the crown joules of mouser's demesne.
-cranioscopical (March 08, 2019, 02:46 PM)
I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.
We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.
-cranioscopical (March 08, 2019, 08:07 PM)
come on guys, try to remember this is a DC forum...
AC your problem.  ;D
Un-phased by all of this...
Trust you to pylon!
-cranioscopical (March 10, 2019, 12:45 PM)
pretty sure you guys have ground about as much as you can out of this
No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.
Or he lets us go on by extension, cord-ially....
could go either way, though I fully expect him to arc up soon
Would we want to have him amp up about this?
The mains part of this powerful conversation sure went off the rail, didn't it?
Only a third of it.
This conversation's spark is fading, so wire you giving it more continuity?
I can't tell—do you approve of such conduct or not?
-cranioscopical (March 11, 2019, 02:32 PM)
I feel a need to insulate myself from that line of questioning.
then watt will you do?
I personally volt that we end this now.

Come on Wraith, stay on the bus!

I'm feeling sad for Wraith, his message won't relay.

I just don't want the thread to diode and gray.

mouser

  • First Author
  • Administrator
  • Joined in 2005
  • *****
  • Posts: 40,900
    • View Profile
    • Mouser's Software Zone on DonationCoder.com
    • Read more about this member.
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #314 on: March 11, 2019, 11:29 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)

Target

  • Honorary Member
  • Joined in 2006
  • **
  • Posts: 1,832
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #315 on: March 12, 2019, 12:59 AM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)

field? field??? oh, I get it, FIELD! Bazinga!!

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #316 on: March 12, 2019, 06:59 AM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)

It all works?!  To celebrate, I volt for a Faraday for an entire week!

cranioscopical

  • Friend of the Site
  • Supporting Member
  • Joined in 2006
  • **
  • Posts: 4,776
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #317 on: March 12, 2019, 08:10 AM »
finished all electric wiring and plumbing, and everything works (!)
Well done! It's quite novel the way you have hot water coming from the cold tap when the light goes on.

wraith808

  • Supporting Member
  • Joined in 2006
  • **
  • default avatar
  • Posts: 11,186
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #318 on: March 12, 2019, 09:11 AM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)

It all works?!  To celebrate, I volt for a Faraday for an entire week!


We'll just call you the generator of a new war...

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #319 on: March 12, 2019, 10:51 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)

It all works?!  To celebrate, I volt for a Faraday for an entire week!


We'll just call you the generator of a new war...

Leave it to Jody Ohms to be the transformer of the conversation...

Target

  • Honorary Member
  • Joined in 2006
  • **
  • Posts: 1,832
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #320 on: March 13, 2019, 05:27 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)
It all works?!  To celebrate, I volt for a Faraday for an entire week!
We'll just call you the generator of a new war...
Leave it to Jody Ohms to be the transformer of the conversation..

can someone remind me, wire are we doing this?

wraith808

  • Supporting Member
  • Joined in 2006
  • **
  • default avatar
  • Posts: 11,186
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #321 on: March 13, 2019, 05:54 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)
It all works?!  To celebrate, I volt for a Faraday for an entire week!
We'll just call you the generator of a new war...
Leave it to Jody Ohms to be the transformer of the conversation..

can someone remind me, wire are we doing this?


Because no one will be the terminator of the arc.

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #322 on: March 13, 2019, 06:04 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)
It all works?!  To celebrate, I volt for a Faraday for an entire week!
We'll just call you the generator of a new war...
Leave it to Jody Ohms to be the transformer of the conversation..

can someone remind me, wire are we doing this?


Because no one will be the terminator of the arc.

Yep, we just keep plugging along.

Target

  • Honorary Member
  • Joined in 2006
  • **
  • Posts: 1,832
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #323 on: March 13, 2019, 09:06 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)
It all works?!  To celebrate, I volt for a Faraday for an entire week!
We'll just call you the generator of a new war...
Leave it to Jody Ohms to be the transformer of the conversation..
can someone remind me, wire are we doing this?
Because no one will be the terminator of the arc.
Yep, we just keep plugging along.


I suppose for some its an outlet, but for the rest its just circuitous...

skwire

  • Global Moderator
  • Joined in 2005
  • *****
  • Posts: 5,286
    • View Profile
    • Donate to Member
Re: Software for planning wood bookcases/cabinets/tables etc?
« Reply #324 on: March 13, 2019, 09:28 PM »
i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)
It all works?!  To celebrate, I volt for a Faraday for an entire week!
We'll just call you the generator of a new war...
Leave it to Jody Ohms to be the transformer of the conversation..
can someone remind me, wire are we doing this?
Because no one will be the terminator of the arc.
Yep, we just keep plugging along.


I suppose for some its an outlet, but for the rest its just circuitous...

As long as the posts are positive, and not negative, I'm happy to continue.
« Last Edit: March 13, 2019, 10:44 PM by skwire »