Messages

126

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 12, 2019, 12:59 AM »

i interrupt this PUN war to report in from the field: I have somehow finished all electric wiring and plumbing, and everything works (!)

-mouser (March 11, 2019, 11:29 PM)

field? field??? oh, I get it, FIELD! Bazinga!!

127

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 11, 2019, 09:28 PM »

rule of thumb, no one should ever touch electricity...

-Target (March 07, 2019, 11:18 PM)

Shocking revelation, that.

-skwire (March 08, 2019, 12:04 AM)

That lightning wit on display, eh?

-wraith808 (March 08, 2019, 12:20 AM)

These kinds of remarks are a bit of a jolt!

-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

-skwire (March 08, 2019, 08:39 AM)

That comment really Hertz.

-wraith808 (March 08, 2019, 09:49 AM)

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

-wraith808 (March 08, 2019, 04:04 PM)

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.

-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...

-Target (March 09, 2019, 08:54 PM)

AC your problem. 

-wraith808 (March 09, 2019, 09:25 PM)

Un-phased by all of this...

-Shades (March 10, 2019, 04:39 AM)

Trust you to pylon!

-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

-Target (March 10, 2019, 06:03 PM)

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

-wraith808 (March 10, 2019, 07:09 PM)

Or he lets us go on by extension, cord-ially....

-Shades (March 10, 2019, 11:57 PM)

could go either way, though I fully expect him to arc up soon

-Target (March 11, 2019, 03:06 AM)

Would we want to have him amp up about this?

-Shades (March 11, 2019, 07:34 AM)

The mains part of this powerful conversation sure went off the rail, didn't it?

-skwire (March 11, 2019, 10:34 AM)

Only a third of it.

-wraith808 (March 11, 2019, 10:42 AM)

This conversation's spark is fading, so wire you giving it more continuity?

-skwire (March 11, 2019, 02:22 PM)

I can't tell—do you approve of such conduct or not?

-cranioscopical (March 11, 2019, 02:32 PM)

I feel a need to insulate myself from that line of questioning.

-skwire (March 11, 2019, 03:03 PM)

then watt will you do?

-Target (March 11, 2019, 06:52 PM)

I personally volt that we end this now.

-wraith808 (March 11, 2019, 07:38 PM)

Come on Wraith, stay on the bus!

128

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 11, 2019, 06:52 PM »

rule of thumb, no one should ever touch electricity...

-Target (March 07, 2019, 11:18 PM)

Shocking revelation, that.

-skwire (March 08, 2019, 12:04 AM)

That lightning wit on display, eh?

-wraith808 (March 08, 2019, 12:20 AM)

These kinds of remarks are a bit of a jolt!

-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

-skwire (March 08, 2019, 08:39 AM)

That comment really Hertz.

-wraith808 (March 08, 2019, 09:49 AM)

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

-wraith808 (March 08, 2019, 04:04 PM)

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.

-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...

-Target (March 09, 2019, 08:54 PM)

AC your problem. 

-wraith808 (March 09, 2019, 09:25 PM)

Un-phased by all of this...

-Shades (March 10, 2019, 04:39 AM)

Trust you to pylon!

-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

-Target (March 10, 2019, 06:03 PM)

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

-wraith808 (March 10, 2019, 07:09 PM)

Or he lets us go on by extension, cord-ially....

-Shades (March 10, 2019, 11:57 PM)

could go either way, though I fully expect him to arc up soon

-Target (March 11, 2019, 03:06 AM)

Would we want to have him amp up about this?

-Shades (March 11, 2019, 07:34 AM)

The mains part of this powerful conversation sure went off the rail, didn't it?

-skwire (March 11, 2019, 10:34 AM)

Only a third of it.

-wraith808 (March 11, 2019, 10:42 AM)

This conversation's spark is fading, so wire you giving it more continuity?

-skwire (March 11, 2019, 02:22 PM)

I can't tell—do you approve of such conduct or not?

-cranioscopical (March 11, 2019, 02:32 PM)

I feel a need to insulate myself from that line of questioning.

-skwire (March 11, 2019, 03:03 PM)

then watt will you do?

129

Living Room / Re: Is there any compact portable browser?

« on: March 11, 2019, 06:44 PM »

FWIW, on my old 1.5GB Atom powered netbook I used to use either K-Meleon or the XP version of PaleMoon (archive link) which had optimisations for Atom CPUs.

-4wd (March 04, 2019, 03:42 AM)

FWIW played with K-Meleon for a couple of days and it was terrible.  For the moment I'm assuming its the browser and not some other issue but I'll give palemoon a go and see what happens

Could be a rebuild in the works...

130

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 11, 2019, 03:06 AM »

rule of thumb, no one should ever touch electricity...

-Target (March 07, 2019, 11:18 PM)

Shocking revelation, that.

-skwire (March 08, 2019, 12:04 AM)

That lightning wit on display, eh?

-wraith808 (March 08, 2019, 12:20 AM)

These kinds of remarks are a bit of a jolt!

-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

-skwire (March 08, 2019, 08:39 AM)

That comment really Hertz.

-wraith808 (March 08, 2019, 09:49 AM)

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

-wraith808 (March 08, 2019, 04:04 PM)

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.

-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...

-Target (March 09, 2019, 08:54 PM)

AC your problem. 

-wraith808 (March 09, 2019, 09:25 PM)

Un-phased by all of this...

-Shades (March 10, 2019, 04:39 AM)

Trust you to pylon!

-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

-Target (March 10, 2019, 06:03 PM)

No one would fault mouser if he set an impedance on the frequency of off-topic conversations on this circuit and placed a demand on us to cut it short.

-wraith808 (March 10, 2019, 07:09 PM)

Or he lets us go on by extension, cord-ially....

-Shades (March 10, 2019, 11:57 PM)

could go either way, though I fully expect him to arc up soon

131

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 10, 2019, 06:03 PM »

rule of thumb, no one should ever touch electricity...

-Target (March 07, 2019, 11:18 PM)

Shocking revelation, that.

-skwire (March 08, 2019, 12:04 AM)

That lightning wit on display, eh?

-wraith808 (March 08, 2019, 12:20 AM)

These kinds of remarks are a bit of a jolt!

-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

-skwire (March 08, 2019, 08:39 AM)

That comment really Hertz.

-wraith808 (March 08, 2019, 09:49 AM)

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

-wraith808 (March 08, 2019, 04:04 PM)

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.

-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...

-Target (March 09, 2019, 08:54 PM)

AC your problem. 

-wraith808 (March 09, 2019, 09:25 PM)

Un-phased by all of this...

-Shades (March 10, 2019, 04:39 AM)

Trust you to pylon!

-cranioscopical (March 10, 2019, 12:45 PM)

pretty sure you guys have ground about as much as you can out of this

132

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 09, 2019, 08:54 PM »

rule of thumb, no one should ever touch electricity...

-Target (March 07, 2019, 11:18 PM)

Shocking revelation, that.

-skwire (March 08, 2019, 12:04 AM)

That lightning wit on display, eh?

-wraith808 (March 08, 2019, 12:20 AM)

These kinds of remarks are a bit of a jolt!

-cranioscopical (March 08, 2019, 08:21 AM)

Ohm my word, I knew you all wouldn't be able to resist.

-skwire (March 08, 2019, 08:39 AM)

That comment really Hertz.

-wraith808 (March 08, 2019, 09:49 AM)

And so it should! After all, we are discussing the crown joules of mouser's demesne.

-cranioscopical (March 08, 2019, 02:46 PM)

I think that there is a potential difference that you re-fuse to see that I can't relay between our alternating current conversations.

-wraith808 (March 08, 2019, 04:04 PM)

We're poles apart and, to be direct, at the risk of seeming a growler, that kind of thinking comes close to analog ic. You really should keep an ion it.

-cranioscopical (March 08, 2019, 08:07 PM)

come on guys, try to remember this is a DC forum...

133

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« on: March 07, 2019, 11:18 PM »

Plumbing and Electricity are two areas that I personally won't touch.  Good luck!

-wraith808 (March 05, 2019, 06:58 PM)

rule of thumb, no one should ever touch electricity...

even electricians use that rule...

134

Living Room / Re: Is there any compact portable browser?

« on: March 04, 2019, 11:47 PM »

Was there more than 1?

-Tuxman (March 04, 2019, 04:32 PM)

if you had read the thread you wouldn't need to ask...

135

Living Room / Re: Is there any compact portable browser?

« on: March 04, 2019, 04:18 PM »

Netsurf is fine.

-Tuxman (March 04, 2019, 03:38 PM)

which question are you responding to here...

136

Living Room / Re: Is there any compact portable browser?

« on: March 04, 2019, 03:22 PM »

Thanks 4WD

I'll give those a go.  I've toyed with kmeleon before, but never seriously

and yes, its still running the original win7 starter edition it came with.  It's getting a bit long in the tooth now and could probably benefit from a rebuild, but converting to linux has long been on the cards (although its a nuisance if I want to use it for some windows related work)

137

Living Room / Re: Is there any compact portable browser?

« on: March 03, 2019, 11:37 PM »

if I can derail this thread slightly, I'm also looking for a 'modern' lightweight browser for my netbook

Not worried about disc requirements, more about memory usage etc. 

The current assumption that everyone has unlimited memory and mega core CPU doesn't apply here - limited to 2Gb ram and an atom processor

FWIW I'm currently using opera as it seems to be the lightest so far.  Chrome is 'useable' but firefox isn't.

I've tried a few others but they all seem to be based on one of the current favourites so there don't appear to be any real gains 

suggestions?

138

Living Room / Re: When you make your 100'th Post

« on: February 24, 2019, 04:34 PM »

A couple of matching numbers, while posting in the same thread, and signed up in the same year, but also one notable difference...

-Ath (February 24, 2019, 03:02 AM)

not sure if that was supposed to be some sort of backhander or not but it sure makes me feel guilty 

quite apart from that, wow...  How the hell do you guys find this stuff?

139

Living Room / Re: Any VBA experts?

« on: February 23, 2019, 09:43 PM »

as usual, more info required...google is your friend

copying a sheet into a book is easy, but you may well have issues with the formulas (depending on what they are and what you're trying to do)

and it sounds like not everything in the formula sheet is applicable in every scenario you might use it in, so it may be that using the process you've described isn't a very efficient solution

140

Living Room / Re: How to automatically generate reports based on xls files?

« on: February 19, 2019, 05:58 PM »

without knowing the format of your spreadsheet it's difficult to provide accurate answers

that said, don't make things harder for yourself than they need to be, ie let excel do the calculations for you (thats what its for after all) by setting up a couple of fields in the source workbook

the counta formula counts the number of fields (cells) in a range that are not blank, eg =counta(A:A).  add '-1' to account for header rows

The countif/countifs function counts the number of occurrences of defined values within a range, eg =countifs(UDE!$AC:$AC,"Low",UDE!$AC:$AC,"MLD") + countif(UDE!$G:$G,"High")

percentages are calculated by dividing the results of your 2 counta formula's, eg =counta(B:B)/counta(A:A).  Note that the proper way to do this would be to substitute the relevant cell references for the counta functions 

can't give you any advice regarding the extraction of the results to another document without knowing more about where and how the source files are stored.  Mail merge may work, but I can't test it against your scenario

141

Living Room / Re: How to automatically generate reports based on xls files?

« on: February 18, 2019, 09:00 PM »

this should be relatively easy in VBA, but I guess it depends on how you want to do it

Do you want to do this from somewhere in office, ie word or excel, and if not then where from (and maybe why)

Do you want to open the source file(s) or just poll them remotely

do you want to do this on a schedule, or ad-hoc

 

142

General Software Discussion / Re: some useful but less-known software. share your list!!!

« on: February 06, 2019, 04:33 PM »

thanks Panzer

143

General Software Discussion / Re: some useful but less-known software. share your list!!!

« on: February 05, 2019, 09:57 PM »

maybe I'm nitpicking, but if anyones adding to the list can they please add something more than just a name + link. 

In a lot of cases the name is a clue as to what the program does, but I'm probably not alone in being wary of clicking on an unqualified link to find out whats on the end of it

Not suggesting for a minute that anyone here would consciously do anything risky, but still...

144

General Software Discussion / Re: Full Windows 10 on Raspberry Pi 3?

« on: January 16, 2019, 11:42 PM »

following...

145

Living Room / Re: silly humor - post 'em here! [warning some NSFW and adult content]

« on: December 30, 2018, 04:12 AM »

That goat had impeccable timing!

-wraith808 (December 28, 2018, 11:04 PM)

You're kidding!

-cranioscopical (December 29, 2018, 04:42 AM)

He went rama-lamba-ding-dong.

-Stoic Joker (December 29, 2018, 08:14 AM)

ewe guys...

146

DC Gamer Club / Re: Latest Steam Giveaway

« on: December 18, 2018, 09:28 PM »

EDIT: Looks like it's essentially a demo. It's a limited, non-fully-featured version of the game. 

-Deozaan (December 18, 2018, 04:56 PM)

I believe its just the 'battle royale' component...

not sure how that works in a 2D shooter, but perhaps thats part of the fun...

147

Living Room / Re: Reviving an old luggable computer

« on: December 17, 2018, 10:47 PM »

Great post! and hats off to you Gothic for persisting with it.

148

Living Room / Re: The quest for a completely silent PC

« on: December 06, 2018, 12:02 AM »

I did that and then put the box over the computer. Now the machine is still very noisy and I can't reach the switch to turn it off.

-cranioscopical (December 05, 2018, 11:38 PM)

clearly someone forgot the duct tape...

149

Living Room / Re: The quest for a completely silent PC

« on: December 05, 2018, 08:03 PM »

or cut the corrugated cardboard out of the side of a box...

150

General Software Discussion / Re: "File Size" Not Increasing As It Should Be

« on: December 02, 2018, 11:21 PM »

There are a few out there that do this.  A lot depends on the methodology even with these, as I've noticed that even doing it programmatically using the Windows API, it stops working after a while.  I've narrowed down this particular issue in several cases to be that the file isn't flushed, but kept locked, so that the operation isn't evident on the drive.  Is it possible that the data hasn't been flushed to the file?

-wraith808 (December 02, 2018, 11:14 PM)

yep, more than a few tools around to do stuff like this. 

Lots of gaps in the OP so the nirsoft stuff is probably a good starting point