topbanner_forum
  *

avatar image

Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
  • Sunday December 8, 2024, 7:00 am
  • Proudly celebrating 15+ years online.
  • Donate now to become a lifetime supporting member of the site and get a non-expiring license key for all of our programs.
  • donate

Last post Author Topic: Automakers Want to Outlaw Gearheads From Working on Their Own Cars  (Read 23838 times)

Renegade

  • Charter Member
  • Joined in 2005
  • ***
  • Posts: 13,291
  • Tell me something you don't know...
    • View Profile
    • Renegade Minds
    • Donate to Member
So, the copyright and IP bug has infected a new portion of the automakers' brains. Now they want to make it illegal for you to work on your car. Because copyright.

http://www.blacklist...552/0/38/38/Y/M.html

Car companies seek copyright restrictions to stop car enthusiasts, home mechanics

Claiming that modern vehicles are “too complex” for home mechanics to fix, automakers are seeking copyright restrictions to prevent gearheads from working on their own cars.



The Association of Global Automakers, a lobbying firm for 12 manufacturers, is asking the U.S. Copyright Office to prevent car owners from accessing “computer programs that control the functioning of a motorized land vehicle, including personal automobiles, commercial motor vehicles, and agricultural machinery, for purposes of lawful diagnosis and repair, or aftermarket personalization, modification, or other improvement.”

“In order to modify automotive software for the purpose of ‘diagnosis and repair, or aftermarket personalization, modification, or other improvement,’ the modifier must use a substantial amount of the copyrighted software – copying the software is at issue after all, not wholly replacing it,” the AGA claimed. “Because the ‘heart,’ if not the entirety, of the copyrighted work will remain in the modified copy, the amount and substantiality of the portion copied strongly indicates that the proposed uses are not fair.”

Auto Alliance, which also represents 12 automobile manufacturers, is also asking the agency to scrap exemptions to the Digital Millennium Copyright Act that allow car enthusiasts to modify and tune their rides.

“Allowing vehicle owners to add and remove [electronic control] programs at whim is highly likely to take vehicles out of compliance with [federal] requirements, rendering the operation or re-sale of the vehicle legally problematic,” Auto Alliance claimed in a statement. “The decision to employ access controls to hinder unauthorized ‘tinkering’ with these vital computer programs is necessary in order to protect the safety and security of drivers and passengers and to reduce the level of non-compliance with regulatory standards.”

But people have been working on their own cars since cars were invented.

“It’s not a new thing to be able to repair and modify cars,” a staff attorney with the Electronic Frontier Foundation, Kit Walsh, said. “It’s actually a new thing to keep people from doing it.”

Interestingly, this attack on the do-it-yourself auto hobby coincides with the current push towards self-driving cars, and who do you think will resist autonomous cars the most?

Auto hobbyists, such as hot rodders, drag racers and home tuners.

“The biggest threat to our hobby is those people in powerful situations who’s idea of a great day out in their car is to spend it riding in the back seat while someone else handles the driving ‘chore’ for them,” a hot rodder said on the subject. “These are the same people who will ban ‘old junk’ from the roads, enforce ’50 miles per gallon’ standards on new, and then older vehicles, and eventually force everyone to drive ‘standardized’ cars that will fit precisely in parking spaces, take up the minimum space on public roads, and follow all the ‘environmentally friendly’ buzz words while boring real car drivers like us to death.”

And the first step to keep people from behind the steering wheel is to keep them from opening the hood.


Embedded links at the link. (6)

I'm wondering if we'll start seeing replacement GPL'd software for cars anytime soon. Certainly it can't be illegal to delete their precious software after all...

Do new cars come with a EULA and an "I agree" checkbox?

Slow Down Music - Where I commit thought crimes...

Freedom is the right to be wrong, not the right to do wrong. - John Diefenbaker

Stoic Joker

  • Honorary Member
  • Joined in 2008
  • **
  • Posts: 6,649
    • View Profile
    • Donate to Member
It's this kind of narrow minded savagely frothing greed that caused people on the fence to go totally Black Hat.

...And quite frankly, I'm already shopping for a Fedora.

mouser

  • First Author
  • Administrator
  • Joined in 2005
  • *****
  • Posts: 40,913
    • View Profile
    • Mouser's Software Zone on DonationCoder.com
    • Read more about this member.
    • Donate to Member
Outrageous and unacceptable.

Now I can see that there will be safety concerns as modifiable software takes over more and more of the operation of cars. You can imagine a scenario in the not too distance future where someone downloads an "unofficial" patch for their latest auto-parking car, and it turns out a virus causes the car to speed up to 100mph randomly or causes brakes to fail.. After all, if it's possible to do something, someone somewhere is going to try to do it.. So i'm not saying that some concerns aren't warranted.   But this idea of blocking people from being able to hack their own stuff has to stop.

Vurbal

  • Supporting Member
  • Joined in 2012
  • **
  • Posts: 653
  • Mostly harmless
    • View Profile
    • Read more about this member.
    • Donate to Member
In other words, they're using the DMCA in exactly the way it was intended.
I learned to say the pledge of allegiance
Before they beat me bloody down at the station
They haven't got a word out of me since
I got a billion years probation
- The MC5

Follow the path of the unsafe, independent thinker. Expose your ideas to the danger of controversy. Speak your mind and fear less the label of ''crackpot'' than the stigma of conformity.
- Thomas J. Watson, Sr

It's not rocket surgery.
- Me


I recommend reading through my Bio before responding to any of my posts. It could save both of us a lot of time and frustration.

CWuestefeld

  • Supporting Member
  • Joined in 2006
  • **
  • Posts: 1,009
    • View Profile
    • Donate to Member
I have a hard time seeing how this can fit into copyright. You're not actually making a copy of the software/data, you're just modifying pieces of it in place.

This is even more innocuous than making backups of your own music, because with cars, there is no copy. You're not changing form, as if you want to be able to hear your CD on an MP3 player. No, you're going to continue to use the original software/data on precisely the one device that the manufacturer sold/licensed it to you for.

Stoic Joker

  • Honorary Member
  • Joined in 2008
  • **
  • Posts: 6,649
    • View Profile
    • Donate to Member
In other words, they're using the DMCA in exactly the way it was intended.

...As a blunt object with which the corporations could beat the common man into subjugation?

Edvard

  • Coding Snacks Author
  • Charter Honorary Member
  • Joined in 2005
  • ***
  • Posts: 3,022
    • View Profile
    • Donate to Member
Aha, this is about altering the control computer's software, not actual car repair.  You almost had me there...  :-[

AFAICT, what they want to stop is folks selling aftermarket performance chips by saying that making them is illegal copying in the same way that making and selling your remix of a popular song without getting permission from the rightsholder is illegal (in their eyes, anyway).

I have a hard time seeing how this can fit into copyright. You're not actually making a copy of the software/data, you're just modifying pieces of it in place.

Well, if the original programming is present on the mod chip, which you bought from a mod chip vendor, then yes, it is a copy.  Ripping and modding your own ROM, not so much.  As close to the fringe that their argument is regarding copyright, I don't see a problem with things like voiding all warranties if the owner used a mod chip, and BTW good luck passing emissions testing.

I'm wondering if we'll start seeing replacement GPL'd software for cars anytime soon. Certainly it can't be illegal to delete their precious software after all...

Well, the man did say "... copying the software is at issue after all, not wholly replacing it, ...".   :P

I dunno, the control software of a car is a VERY exacting piece of kit which is the entire reason we have cars that can get 20+ miles to the gallon and still have decent horsepower.  It takes very brave (or stupid) people to think is a good idea to mess with that, and I'm not one of them.  I'd never support making modding illegal, but I don't blame the manufacturers getting upset about it.

Is it me, or is the whole "Autonomous Car" thing seem like nothing more than a "personal bus"?  If I were a gearhead, I'd be bored too...
driving.gif

Stoic Joker

  • Honorary Member
  • Joined in 2008
  • **
  • Posts: 6,649
    • View Profile
    • Donate to Member
Aha, this is about altering the control computer's software, not actual car repair.  You almost had me there...  :-[

The two are not mutually exclusive...as sometimes the repair is to alter the control computer's software. It's bad enough that the bar is already set at prohibitively expensive gadgetry just to do a minor engine tweak like dropping the idle so one's Harley goes back to idling like a Harley is supposed to instead of buzzing like some spastic appliance (Dealer Only Item(s) cost ~$600 for just that!).

No the corporate masters need to lose this one, and the messier the better. Because killing off an entire aspect of our culture in the name of IP law is simple unacceptable.


Well, the man did say "... copying the software is at issue after all, not wholly replacing it, ...".

A clever sentiment sure. But it reality which scenario is more likely to have an adverse impact on the environment?
1. People get an existing know good system and tweak it to their specific needs/liking.
2. People have to scratch build something totally in the hops of building a workable (close enough) baseline they can then work from.
« Last Edit: April 23, 2015, 07:13 AM by Stoic Joker »

MilesAhead

  • Supporting Member
  • Joined in 2009
  • **
  • Posts: 7,736
    • View Profile
    • Donate to Member
Go back to points plugs condenser.  No solid state, no software/firmware under the hood.  No copyright. No problems.  Cars need not be programmed.  Just tuned every few years.  :)

Renegade

  • Charter Member
  • Joined in 2005
  • ***
  • Posts: 13,291
  • Tell me something you don't know...
    • View Profile
    • Renegade Minds
    • Donate to Member
I know quite a few people here have worked on large software projects, but I'm curious -- Has anyone worked on projects with "kill dates" built into the project? I don't mean something like a campaign that runs for X days/weeks/months, but real kill dates where even while the project is being developed, the end of life is already known -- without that being communicated to users until a set date.

I suspect that there's likely some nastiness built into the software, and that if it were decompiled, organised, and understood, there would be some outcry.

I'll skip the conspiracy facts. ;)

Oh, heck. Let's roll with one. :P

Published in Wired:

http://www.wired.com...t-nightmare-farmers/

From here:

http://ifixit.org/bl...7007/farm-equipment/

And a snippet from there:

Aside from using it, there’s not much you can do with modern ag equipment. When it breaks or needs maintenance, farmers are dependent on dealers and manufacturer technicians—a hard pill to swallow for farmers, who have been maintaining their own equipment since the plow."

"[DIY repair] is cheaper than calling out the technician. But that information is just not out there," Dave explained to me.

The cost and hassle of repairing modern tractors has soured a lot of farmers on computerized systems altogether. In a September issue of Farm Journal, farm auction expert Greg Peterson noted that demand for newer tractors was falling. Tellingly, the price of and demand for older tractors (without all the digital bells and whistles) has picked up. “As for the simplicity, you’ve all heard the chatter,” Machinery Pete wrote. “There’s an increasing number of farmers placing greater value on acquiring older simpler machines that don’t require a computer to fix.”

The problem is that farmers are essentially driving around a giant black box outfitted with harvesting blades. Only manufacturers have the keys to those boxes. Different connectors are needed from brand to brand, sometimes even from model to model—just to talk to the tECU. Modifications and troubleshooting require diagnostic software that farmers can’t have. Even if a farmer managed to get the right software, calibrations to the tECU sometimes require a factory password. No password, no changes—not without the permission of the manufacturer.

John Deere, in particular, has been incredibly effective at limiting access to its diagnostic software. Which is why I wouldn’t have been able to tweak the programming on Dave’s tractor, even if I had been able to hack together the right interface. John Deere doesn’t want me to. The dealer-repair game is just too lucrative for manufacturers to cede any control back to farmers.

Does anyone think consumer vehicles are much different?

Oh, what's that sound? The squirting of milk into a steel bucket? I think I hear some cackling as well...



I dunno, the control software of a car is a VERY exacting piece of kit which is the entire reason we have cars that can get 20+ miles to the gallon and still have decent horsepower.  It takes very brave (or stupid) people to think is a good idea to mess with that, and I'm not one of them.  I'd never support making modding illegal, but I don't blame the manufacturers getting upset about it.

Unfortunately, "improved fuel efficiency" in modern cars is a near total fabrication. Or at least in the US. Regulatory authorities actively work against the industry to create less fuel efficient cars, and then set idiotic emissions standards that are ineffective and that only create more emissions. You can't make this stuff up.

Check out Eric Peters for all kinds of crazy information on that. It's simply unbelievable, yet he has all the facts to back it up. Just nutty. You might have seen him on news programs - he covers the automotive industry (probably in too much depth for some people).

FAIR WARNING: If anyone actually checks out Eric Peters commentary on what happens in the industry, be prepared to start screaming, cursing, and breaking things. It will seriously piss you off, as in homicidal rage I just came to because I nearly drown in a pool of blood surrounded by uncountable dismembered bodies pissed off. And, for everyone else, he'll just piss you off period. :P

A fun exercise is to check identical models of cars in Europe and the US for mileage. It's silly. ::wallbash::

But, back to chips...

There are a few people out there creating mods and add-ons for vehicle computer systems. Many are actually outside of the system, but modify and control communications (and more) and then relay that to other systems in the vehicle to create improvements. The external devices are so far removed from any ability of the manufacturers to retaliate, that we won't see them retaliate for at least a couple more years. :P 8) Unless they want to go full retard MAFIAA. 8)

This issue is going to spill into a lot more areas and very quickly.
Slow Down Music - Where I commit thought crimes...

Freedom is the right to be wrong, not the right to do wrong. - John Diefenbaker

SeraphimLabs

  • Participant
  • Joined in 2012
  • *
  • Posts: 497
  • Be Ready
    • View Profile
    • SeraphimLabs
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #10 on: April 26, 2015, 06:59 PM »
I've said this for a long time as well. Most of your 'environmentally friendly' measures implemented on American cars are in fact a burden that reduces your fuel economy. And it is already a federal crime to remove or bypass an emissions control device, even though basically every performance equipped custom vehicle started out by removing most if not all of the emissions devices in the name of performance gains.

And I like so many other technically inclined people have a healthy enough distrust of computing devices to not ever allow a system to tell me what I cannot do. It either does what I tell it to, or it finds itself being reprogrammed to a system that I can be in control of. Its a shame cars are too varied to really allow a GPL drop-in replacement for the typical PCM, but perhaps a platform that could be coupled with DIY hardware using a modular software structure akin to most Linuxes would make it fairly easy for someone with a working knowledge of computers to assemble and program an open source PCM to fit their vehicle. I wouldn't mind trying it myself.

But a lot of cars you can completely redefine their operating behavior as easily as changing a memory cassette in the PCM, with more modern vehicles being dealer-reprogrammable by simply re-flashing the software and tables inside it. I see this as a play by the automakers to guarantee their stranglehold on that capability, so that nobody outside of their authorized dealerships can legally have the tools or software to do modifications on that level, modifications often required by high end performance modding to allow the PCM to work with performance parts.

Far as I know though, the ultimate you can get in fuel economy for a gasoline engine with modern technology is the following. Anything else just burdens the motor or makes you use more fuel than you need. :

Feedback Carburetor- this does have an oxygen sensor and computer, and uses feedback from the oxygen sensor to adjust bypass air. Like so you set the base mixture to suit the engine, and then the bypass trims it richer or leaner as needed to compensate for variations in driving conditions and engine behavior.

"Straight" Gasoline - NONE of that Ethanol crap! I've tested this myself, using '87 octane' gasoline purchased in bulk for a farm tested against '87 octane' pump gasoline from the station downtown that is marked as containing up to 10% ethanol. Well, on a 1.6L carbureted engine, the straight gas was giving me almost 40 MPG, while the E10 was barely making 30 MPG. Now think about this a minute- gas consumed vs mileage travelled, and you suddenly realize that E10 gasoline is causing me to burn more actual gasoline than i would be using on straight gas.

Electronic spark advance - this and the feedback carburetor are among the very few places where the electronics do beat their mechanical counterparts. Simply because the ignition timing can be made far more precise and can respond to changes in operating conditions far more easily than can be done mechanically. Plus the breaker points are a high maintenance area that is often neglected, letting the electronics win in this area eliminates an often neglected maintenance item that has fuel economy penalties for ignoring.



MilesAhead

  • Supporting Member
  • Joined in 2009
  • **
  • Posts: 7,736
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #11 on: April 27, 2015, 07:28 AM »
^^  Interesting.  I have to agree that electronic spark advance has to be more accurate than spring, vacuum and flywheel schemes.  However, once you can no longer see how something works with the naked eye(even if it must be disassembled to do so) then by definition it starts working in invisible ways.  At that point not everything being done can be detected.  The operator is no longer in control.
« Last Edit: April 27, 2015, 09:17 AM by MilesAhead »

Stoic Joker

  • Honorary Member
  • Joined in 2008
  • **
  • Posts: 6,649
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #12 on: April 28, 2015, 06:53 AM »
^^  Interesting.  I have to agree that electronic spark advance has to be more accurate than spring, vacuum and flywheel schemes.  However, once you can no longer see how something works with the naked eye(even if it must be disassembled to do so) then by definition it starts working in invisible ways.  At that point not everything being done can be detected.  The operator is no longer in control.

Ah the tactile joys of working on a true machine. Just springs, gears, belts, chains, and levers...with all actions and interactions in full view where their purposes and beauty of design can be appreciated.

I've been helping a friend restore a 1980 Shovelhead FLH over the past few months, and the experience has been positively therapeutic for exactly that reason. I've been happier in the garage with that old girl and all her quirky arcane foibles than doing anything I've ever done in IT. I even got a bit teary this Sunday when she finally roared to life after many years in a pile of boxes ... For reasons one will either intuitively already know, be incapable of grasping.

To me they are not just machines..

MilesAhead

  • Supporting Member
  • Joined in 2009
  • **
  • Posts: 7,736
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #13 on: April 28, 2015, 08:01 AM »
^^ One of the biggest downers to me as I became competent fixing cars was the "Classic Movement" or whatever one wants to call it.  The main advantage of being willing to crawl around under cars in nearly freezing weather, enduring icy water dripping down your neck when doing front end alignments, and putting up with too hot engines(lean burn) when doing tune ups, was the fact you could pick up a car with some years and miles on it and make it run well on the cheap.

Once the "Classic Movement" kicked in the asking price for jalopies that ran like crap went way up just because they were more than x years old. They got the money out of you on the front end of the deal.  Takes all the fun out of it.  :)

I'm glad you got to tinker with a nice machine though.  It is a weird experience when you open a hood and can actually put your hand on anything you want without sliding it between hoses and foil tubes.  All that open space to work in!  :)


Vurbal

  • Supporting Member
  • Joined in 2012
  • **
  • Posts: 653
  • Mostly harmless
    • View Profile
    • Read more about this member.
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #14 on: April 28, 2015, 08:38 AM »
In other words, they're using the DMCA in exactly the way it was intended.

...As a blunt object with which the corporations could beat the common man into subjugation?

Generally speaking, yes. More specifically, though, its purpose was always to give copyright holders a veto over innovation that interfered with their business model. I'm sure the automakers are fine with you modding your car's computer, but only so long as they can stick their hands in the pockets of extract licensing fees from the people making the tools.

Of course, even if the elderly history professor with sole responsibility for the decision (ie the Librarian Of Congress) sides with them, they still haven't accomplished anything besides chasing development of the programming software out of the US.

Well, technically, they'll also have angered the people who buy most of their aftermarket performance parts. Car nuts were well organized before the Internet. That has increased exponentially with online communities. This is an attack not only on them, but also on the multitude of small shops that cater to the performance tuning market.

Which reminds me, I'm almost out of popcorn.
I learned to say the pledge of allegiance
Before they beat me bloody down at the station
They haven't got a word out of me since
I got a billion years probation
- The MC5

Follow the path of the unsafe, independent thinker. Expose your ideas to the danger of controversy. Speak your mind and fear less the label of ''crackpot'' than the stigma of conformity.
- Thomas J. Watson, Sr

It's not rocket surgery.
- Me


I recommend reading through my Bio before responding to any of my posts. It could save both of us a lot of time and frustration.

SeraphimLabs

  • Participant
  • Joined in 2012
  • *
  • Posts: 497
  • Be Ready
    • View Profile
    • SeraphimLabs
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #15 on: April 28, 2015, 01:08 PM »
^^ One of the biggest downers to me as I became competent fixing cars was the "Classic Movement" or whatever one wants to call it.  The main advantage of being willing to crawl around under cars in nearly freezing weather, enduring icy water dripping down your neck when doing front end alignments, and putting up with too hot engines(lean burn) when doing tune ups, was the fact you could pick up a car with some years and miles on it and make it run well on the cheap.

That's still quite possible, and experiences I know all too well. Clunked the barrier on ice in January a few years back and spent several days under a tarp in a blizzard with the front end of the car apart stitching the ~300 wire PCM harness back into a sane configuration so that the engine will fire up again. Or one of my more recent ones, on my way to a christmas dinner with the wife's family and I burst a transmission cooler hose. Ended up getting her and her brother helping me push it more than a mile to the parking lot where I work, all my tools were there to piece it back together.

Its just harder to do. As cars become increasingly automated, they become less tolerant of components wearing out and systems not quite performing as they used to. It makes the PCM liable to just freak out and shut the car down, then throw tantrums at you when you try to troubleshoot and get it going again. Even then though, I have no problems picking up a car that is one step away from the scrap heap for $1000, putting new CV joints and brakes on it, and driving it for 3-5 more years and 50k miles further before it finally passes beyond my ability to keep it clunking and goes to the scrap anyway.

In that regard the cash for clunkers program really screwed me over. Thousands of perfectly good candidates that were the right age and while quite travelled still had plenty of useful life were collected and intentionally destroyed in the name of government subsidy. Since then the price of old cars has gone way up because an entire decade's worth of easily repaired used cars was lost.

Renegade

  • Charter Member
  • Joined in 2005
  • ***
  • Posts: 13,291
  • Tell me something you don't know...
    • View Profile
    • Renegade Minds
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #16 on: April 28, 2015, 05:11 PM »
In that regard the cash for clunkers program really screwed me over. Thousands of perfectly good candidates that were the right age and while quite travelled still had plenty of useful life were collected and intentionally destroyed in the name of government subsidy. Since then the price of old cars has gone way up because an entire decade's worth of easily repaired used cars was lost.
-SeraphimLabs (April 28, 2015, 01:08 PM)

That was a colossal waste of money. Here's one rant about it:

http://ericpetersaut...6/cash-for-everyone/

Slow Down Music - Where I commit thought crimes...

Freedom is the right to be wrong, not the right to do wrong. - John Diefenbaker

mwb1100

  • Supporting Member
  • Joined in 2006
  • **
  • Posts: 1,645
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #17 on: April 29, 2015, 12:19 PM »
In that regard the cash for clunkers program really screwed me over. Thousands of perfectly good candidates that were the right age and while quite travelled still had plenty of useful life were collected and intentionally destroyed in the name of government subsidy. Since then the price of old cars has gone way up because an entire decade's worth of easily repaired used cars was lost.
-SeraphimLabs (April 28, 2015, 01:08 PM)

I had never thought of that aspect of the cash for clunkers program.

CWuestefeld

  • Supporting Member
  • Joined in 2006
  • **
  • Posts: 1,009
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #18 on: April 29, 2015, 01:43 PM »
I hate to get political here, but yes: Cash for Clunkers was an epic failure.

It didn't help the economy. Studies show that almost half of the money went to people who were going to buy new cars anyway.

And it was bad for the environment. By destroying a pile of moderately used cars that got traded in, the price of other used cars rose significantly (as was noted above). The result is that poor folks can no longer afford to replace the really old rustbucket they're driving, so the worst polluters are staying on the road instead of being retired.

The law of unintended consequences can't be avoided, even by - especially by - governments.

Renegade

  • Charter Member
  • Joined in 2005
  • ***
  • Posts: 13,291
  • Tell me something you don't know...
    • View Profile
    • Renegade Minds
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #19 on: April 29, 2015, 07:09 PM »
The law of unintended consequences can't be avoided, even by - especially by - governments.

I have a very difficult time believing that the consequences weren't unintended. When you have decision power over that kind of money, you're generally pretty smart and have lots of other smart people around you. While the maxim "never attribute to malice that which can be attributed to incompetence" often holds, I just can't see that in the Cash for Clunkers program.
Slow Down Music - Where I commit thought crimes...

Freedom is the right to be wrong, not the right to do wrong. - John Diefenbaker

Vurbal

  • Supporting Member
  • Joined in 2012
  • **
  • Posts: 653
  • Mostly harmless
    • View Profile
    • Read more about this member.
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #20 on: April 29, 2015, 07:50 PM »
The law of unintended consequences can't be avoided, even by - especially by - governments.

I have a very difficult time believing that the consequences weren't unintended. When you have decision power over that kind of money, you're generally pretty smart and have lots of other smart people around you. While the maxim "never attribute to malice that which can be attributed to incompetence" often holds, I just can't see that in the Cash for Clunkers program.

You can't possibly suggesting there were any ulterior motives behind the government subsidizing car purchases right when the auto industry was scrambling to survive their self inflicted wounds.
I learned to say the pledge of allegiance
Before they beat me bloody down at the station
They haven't got a word out of me since
I got a billion years probation
- The MC5

Follow the path of the unsafe, independent thinker. Expose your ideas to the danger of controversy. Speak your mind and fear less the label of ''crackpot'' than the stigma of conformity.
- Thomas J. Watson, Sr

It's not rocket surgery.
- Me


I recommend reading through my Bio before responding to any of my posts. It could save both of us a lot of time and frustration.

Renegade

  • Charter Member
  • Joined in 2005
  • ***
  • Posts: 13,291
  • Tell me something you don't know...
    • View Profile
    • Renegade Minds
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #21 on: April 30, 2015, 08:59 AM »
You can't possibly suggesting there were any ulterior motives behind the government subsidizing car purchases right when the auto industry was scrambling to survive their self inflicted wounds.

Who? Me? Oh, never~! :P

Reality is *exactly* as described on the 6 o'clock news.
Slow Down Music - Where I commit thought crimes...

Freedom is the right to be wrong, not the right to do wrong. - John Diefenbaker

tomos

  • Charter Member
  • Joined in 2006
  • ***
  • Posts: 11,964
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #22 on: November 24, 2015, 03:06 PM »
edit// not really sure if this in correct thread, but will leave it...

From here:

http://ifixit.org/bl...7007/farm-equipment/

And a snippet from there:

    Aside from using it, there’s not much you can do with modern ag equipment. When it breaks or needs maintenance, farmers are dependent on dealers and manufacturer technicians—a hard pill to swallow for farmers, who have been maintaining their own equipment since the plow."

    "[DIY repair] is cheaper than calling out the technician. But that information is just not out there," Dave explained to me.

    The cost and hassle of repairing modern tractors has soured a lot of farmers on computerized systems altogether. In a September issue of Farm Journal, farm auction expert Greg Peterson noted that demand for newer tractors was falling. Tellingly, the price of and demand for older tractors (without all the digital bells and whistles) has picked up. “As for the simplicity, you’ve all heard the chatter,” Machinery Pete wrote. “There’s an increasing number of farmers placing greater value on acquiring older simpler machines that don’t require a computer to fix.”

    The problem is that farmers are essentially driving around a giant black box outfitted with harvesting blades. Only manufacturers have the keys to those boxes. Different connectors are needed from brand to brand, sometimes even from model to model—just to talk to the tECU. Modifications and troubleshooting require diagnostic software that farmers can’t have. Even if a farmer managed to get the right software, calibrations to the tECU sometimes require a factory password. No password, no changes—not without the permission of the manufacturer.

    John Deere, in particular, has been incredibly effective at limiting access to its diagnostic software. Which is why I wouldn’t have been able to tweak the programming on Dave’s tractor, even if I had been able to hack together the right interface. John Deere doesn’t want me to. The dealer-repair game is just too lucrative for manufacturers to cede any control back to farmers.

there's not much info here but still of interest:
Open source hardware autonomous tractor uses repurposed drone autopilot (boingboing)

video from same:

Tom

Stoic Joker

  • Honorary Member
  • Joined in 2008
  • **
  • Posts: 6,649
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #23 on: November 24, 2015, 03:43 PM »
From tomos' link above:
You bought it, you should own it. Period. You should have the right to use it, modify it, and repair it wherever, whenever, and however you want. Defend your right to fix.

Damn Straight!!!

tomos

  • Charter Member
  • Joined in 2006
  • ***
  • Posts: 11,964
    • View Profile
    • Donate to Member
Re: Automakers Want to Outlaw Gearheads From Working on Their Own Cars
« Reply #24 on: November 24, 2015, 04:05 PM »
From tomos' link above:
You bought it, you should own it. Period. You should have the right to use it, modify it, and repair it wherever, whenever, and however you want. Defend your right to fix.

Damn Straight!!!

is that quote from the podcast? source (cbc radio - I hadn't listened to that...)
Tom