=
http://www.emeditor....1/rewrite/tc_41.htmlEmEditor Professional v13 New Features
One of the biggest upgrades ever in EmEditor history --
Beta available now! Buy now and get a free upgrade when v13 is released!
Multiple Selection Editing
The new version allows you to select multiple locations within a
document. To make multiple selections, after making one selection, make
another selection with the mouse while pressing the CTRL key.
Alternatively, you can press the F8 key, move the cursor to extend the
selection, press the F8 key again to finish the selection, move the
cursor again to go to the next selection position, and repeat this
procedure until you make all selections. Moreover, the Add Next
Occurrence command (CTRL+R) will find the same text as the word at the
cursor. The Add Next Next Occurrence command will skip the next
occurrence, but add the occurrence after the next one. The Select All
Occurrences command (CTRL+SHIFT+A) will select all the occurrences.
After you make multiple selections, you can type new text to replace all
the selections at once. Pressing the BACKSPACE key removes the last
character in each selection. Moreover, you can use many conversion
commands against the selections.
The Find All button was added to the Find dialog box, which allows you to select all the occurrences.
Along with multiple selection editing, vertical selection editing has
been enhanced. For instance, pressing BACKSPACE with the zero-width
vertical selection now removes the last character in each line. This
allows you to remove the end portions of text in multiple lines more
easily than ever!
Moreover, the Switch Starting Point and Ending Point command (SHIFT+F8)
was added. Before the new version, you could move the ending point by
pressing arrow keys while pressing the SHIFT key, but couldn't move the
starting point. Now with the new version, you can move the cursor to the
selection starting point by pressing SHIFT+F8, and then adjust the
selection starting point.
Multiple Selection Editing
Multiple Selection Editing Add Next Occurrence and Select All Occurrences
Add Next Occurrence and Select All Occurrences
The new Find All button on the Find Dialog Box
The new Find All button on the Find Dialog Box The new Find All button on the Markers toolbar
The new Find All button on the Markers toolbar
More Support for Very Large Files
EmEditor can now open a file containing a very long line (longer than
4GB). When EmEditor loads a file containing a very long line, it will
split the long line into several lines, but it will combine them when
saving the file.
Pasting very large text via the Clipboard became more stable by
dynamically creating a temporary file. The various Sort commands and the
Delete Duplicate Lines command were also optimized for large files, and
there is no longer a limitation of size to run these commands.
The new version also allows you to combine or split very large files
easily. The new Split Current Document to Several Files command allows
you to split the current document into several files either every
user-specified number of lines, or before every bookmarked line. It also
allows you to specify a header and/or footer to each separated file. The
new Combine Documents to a File command allows you to combine multiple
documents into one file.
Split Current Document to Several Files wizard
Split Current Document to Several Files wizard Combine Documents to a File wizard
Combine Documents to a File wizard
Multiple File Encoding Conversions
The new version allows you to convert encodings of many files at the
same time. To do this, first open all files that you want to convert
with EmEditor, either by pressing CTRL+O to open the Open dialog and
selecting multiple files, or by specifying "emeditor.exe *.*", for
example, in the Command Prompt window. Then selecting Save All with
Encoding on the File menu will allow you to save all documents with a
specified encoding.
Save All with Encoding
Save All with Encoding dialog Box
Quick Launch
The new Quick Launch command allows you to open a dialog box where you
can type a partial keyword to search all the commands. A list box is
quickly filled with searched commands, and then you can select which
list item you want to launch. The Quick Launch dialog box will search
all EmEditor commands, plug-ins, macros, external tools, recently used
files, folders, fonts, opened document file names, and much more!
Quick launch dialog box
Quick launch dialog box
Plug-ins
HTML Bar plug-in
The large-size toolbar is now available.
Outline plug-in
Optimized for speed when displaying outline as guide.
Projects plug-in
Solution loading operates much more quickly, as projects are not loaded until they are used.
The Reload command was added in the context menu - Solution sub menu. Also, the F5 key was assigned as the Reload command.
Other Features
- The Comment/Uncomment commands now work as begin/end comments (for example, /* ... */) in addition to line comments.
EmEditor will choose begin/end comments when the middle of a line is selected.
- A workspace now saves all bookmarks automatically. Bookmarks will no longer be erased when reloading files.
- When creating a new file by specifying a non-existing file name in the Open dialog box, EmEditor will now create a zero-byte empty file.
- The Help for each dialog box now contains information about all the controls without needing to navigate through branch items.
The Help button was deprecated, and pressing the ? button or the F1 key will bring up the pertinent Help.
- A progress bar and a percentage indicator are now displayed in the progress window.
- The new Fast Binary Comparison (Ignore Locale) allows for faster sort. Clearing the Stable Sort also allows for faster sort when stable sorting is not necessary.
- Find in Files dialog box now shows all associated file extensions of the current configuration in the File Types text box when Current File Type is selected from the > menu.
- High-DPI settings supported.
- The new version allows you to select text by mouse outside of the text area specified by the Narrowing command.
- The installer now allows you to add the Context Menu to Windows Explorer, and to have EmEditor check the updates.
- The installer command line options were added: NOCHECKUPDATES, NOCONTEXTMENU, NODESKTOP, NOIEEDITOR, NOIEVIEW, NOPATH, NOSHORTCUT, NOTRAYICON, and NOTXT.
- EmEditor Free is back! This time, EmEditor Free is the same executable file as EmEditor Professional. After you try EmEditor Professional for 30 days,
you can still use EmEditor Free without purchasing the product for personal use only.
Begin/end comments
Begin/end comments
New options
The Save All with Encoding dialog box
The Configuration Associations dialog box
The Split Current Document to Several Files wizard
The Combine Documents to a File wizard
The Quick Launch dialog box
The Enable Multiple Selections check box in the Edit tab of the Customize dialog box
The Fast Binary Comparison (Ignore Locale) check box, the Stable Sort check box, and the Minimum Memory Size text box in the Sort tab of the Customize dialog box
The Use Double Buffering check box in the View tab of the Customize dialog box
The Memory Size, L1 Cache Size, L2 Cache Size, and percentage of physical memory in use items were added to the list in the Status tab of the Customize dialog box
The Memory Size, L1 Cache Size, and L2 Cache Size text boxes in the Advanced tab of the Customize dialog box.
The Selected Text or Word at Cursor item in the > drop-down menu by the Find text box in the Find dialog box
The Current File Extension item in the > drop-down menu by the File Types text box in the Find in Files dialog box
The Indent only at New Lines check box in the Tab/Indent dialog box
The Set as Default button and the Associations button in the Define Configurations dialog box
$(AppDir), $(AppDrive), and $(Clipboard) parameters were added to the menu displayed when the > button is clicked in the External Tool Properties.
The Prompt before Deleting an Old File when Renaming check box was added to the Save Details dialog box.
The Skip Empty Lines and Restart Numbering after Empty Lines check boxes were added to the Insert Numbering dialog box
The <strong>Configuration Associations</strong> dialog box
The Configuration Associations dialog box The new <strong>Enable Multiple Selections</strong> check box
The new Enable Multiple Selections check box
The new Fast Binary Comparison (Ignore Locale) and Stable Sort check boxes
The new Fast Binary Comparison (Ignore Locale) and Stable Sort check boxes and Maximum Memory Size text box The <strong>Use Double Buffering</strong> check box
The Use Double Buffering check box
The Memory Size, L1 Cache Size, and L2 Cache Size text boxes
The Memory Size, L1 Cache Size, and L2 Cache Size text boxes The Set as Default button and the Associations button in the Define Configurations dialog box
The Set as Default button and the Associations button in the Define Configurations dialog box
New commands
Select All Occurrences
Add Next Occurrence
Add Next Next Occurrence
Split Current Document to Several Files
Combine Documents to a File
Quick Launch
Save All with Encoding
Downgrade
Upgrade
Repeat Last Command
Associate Configuration
Select Beginning of Lines
Select Ending of Lines
Switch Starting Point and Ending Point
Find All (Marker toolbar right-click menu)
Macro new features
The Count property was added to the Selection object.
The PromptRename property was added to the FileSaveProp object.
Plug-in API new features
EE_GET_MULTI_SEL message (Editor_GetMultiSel inline function)
EI_GET_CMD_LIST_SIZE flag (EE_INFO message)
EE_SET_OUTLINE_ARRAY messsage (Editor_OutlineArray inline function)
OUTLINE_ARRAY_INFO structure
EVENT_UI_CHANGED event
Buy Now and upgrade to v13 free when it becomes available!
