- Electromagnetics I
- Ch 9: Plane Waves in Loseless Media
- Loc 9.4

- Electromagnetics I
- Ch 9
- Loc 9.4

# Uniform Plane Waves - Derivation

Section 9.2 showed how Maxwell’s Equations could be reduced to a pair of phasor-domain “wave equations,” namely:

where

, assuming unbounded homogeneous, isotropic, lossless, and source-free media. In this section, we solve these equations for the special case of a uniform plane wave. A uniform plane wave is one for which both

and

have constant magnitude and phase in a specified plane. Despite being a special case, the solution turns out to be broadly applicable, appearing as a common building block in many practical and theoretical problems in unguided propagation (as explained in Section 9.3), as well as in more than a few transmission line and waveguide problems.

To begin, let us assume that the plane over which

and

have constant magnitude and phase is a plane of constant

. First, note that we may make this assumption with no loss of generality. For example, we could alternatively select a plane of constant

, solve the problem, and then simply exchange variables to get a solution for planes of constant

(or

).^{1} Furthermore, the solution for any planar orientation not corresponding to a plane of constant

,

, or

may be similarly obtained by a rotation of coordinates, since the physics of the problem does not depend on the orientation of this plane – if it does, then the medium is not isotropic!

We may express the constraint that the magnitude and phase of

and

are constant over a plane that is perpendicular to the

axis as follows:

Let us identify the Cartesian components of each of these fields as follows:

and for

as follows:

The wave equation for

(Equation 9.4.1 written explicitly in Cartesian coordinates is

Decomposing this equation into separate equations for each of the three coordinates, we obtain the following:

Applying the constraints of Equations 9.4.6 and 9.4.7, we note that many of the terms in Equations 9.4.11-9.4.13 are zero. We are left with:

Now we will show that Equation 9.4.3 also implies that

must be zero. To show this, we use Ampere’s Law for a source-free region (Section 9.2):

and take the dot product with

on both sides:

Again applying the constraints of Equation 9.4.3, the left side of Equation 9.4.18 must be zero; therefore,

. The exact same procedure applied to

(using the Maxwell-Faraday Equation; also given in Section 9.2) reveals that

is also zero.^{2} Here is what we have found:

If a wave is uniform over a plane, then the electric and magnetic field vectors must lie in this plane.

This conclusion is a direct consequence of the fact that Maxwell’s Equations require the electric field to be proportional to the curl of the magnetic field and vice-versa.

The general solution to Equation 9.4.14 is:

where

and

are complex-valued constants. The values of these constants are determined by boundary conditions – possibly sources – outside the region of interest. Since in this section we are limiting our scope to source-free and homogeneous regions, we may for the moment consider the values of

and

to be arbitrary, since any values will satisfy the associated wave equation.^{3}

Similarly we have for

:

where

and

are again arbitrary constants. Summarizing, we have found

Note that Equations 9.4.19 and 9.4.20 are essentially the *same* equations encountered in the study of waves in lossless transmission lines; for a reminder, see Section 3.6. Specifically, factors containing

describe propagation in the

direction, whereas factors containing

describe propagation in the

direction. We conclude:

If a wave is uniform over a plane, then possible directions of propagation are the two directions perpendicular to the plane.

Since we previously established that the electric and magnetic field vectors must lie in the plane, we also conclude:

The direction of propagation is perpendicular to the electric and magnetic field vectors.

This conclusion turns out to be generally true; i.e., it is not limited to uniform plane waves. Although we will not provide a rigorous proof of this, one way to see that this is true is to imagine that any type of wave can be interpreted as the sum (formally, a *linear combination*) of uniform plane waves, so perpendicular orientation of the field vectors with respect to the direction of propagation is inescapable.

The same procedure yields the uniform plane wave solution to the wave equation for

, which is

where

and where

,

,

and

are arbitrary constants. Note that the solution is essentially the same as that for

, with the sole difference being that the arbitrary constants may apparently have different values.

To this point, we have seen no particular relationship between the electric and magnetic fields, and it may appear that the electric and magnetic fields are independent of each other. However, Maxwell’s Equations – specifically, the two curl equations – make it clear that there must be a relationship between these fields. Subsequently the arbitrary constants in the solutions for

and

must also be related. In fact, there are two considerations here:

- The
*magnitude and phase*of must be related to the magnitude and phase of . Since both fields are solutions to the same differential (wave) equation, they may differ by no more than a multiplicative constant. Since the units of and are V/m and A/m respectively, this constant must be expressible in units of V/m divided by A/m; i.e., in units of , an impedance. - The
*direction*of must be related to direction of .

Let us now address these considerations. Consider an electric field that points in one of the cardinal directions – let’s say

– and make the definition

for notational convenience. Then the electric field intensity may be written as follows:

Again, there is no loss of generality here since the coordinate system could be rotated in such a way that *any* uniform plane could be described in this way.

We may now determine

from

using the Maxwell-Faraday Equation (Section 9.2):

Solving this equation for

, we find:

Now let us apply the curl operator. The complete expression for the curl operator in Cartesian coordinates is given in Section B.2. Here let us consider one component at a time, starting with the

component:

Since

, the above expression is zero and subsequently

. Next, the

component:

Here

, so we have simply

It is not necessary to repeat this procedure for

, since we know in advance that

must be perpendicular to the direction of propagation and subsequently

. Returning to Equation 9.4.27, we obtain:

Note that

points in the

direction. So, as expected, both

and

are perpendicular to the direction of propagation. However, we have now found a more specific relationship:

and

are perpendicular *to each other*. Just as

, we see that

points in the direction of propagation. This is illustrated in Figure 9.4.1.

## Summarizing:

,

, and the direction of propagation

are mutually perpendicular.

Now let us resolve the question of the factor relating

and

. The factor is now seen to be β/ωμβ/ωμ in Equation 9.4.31, which can be simplified as follows:

The factor

appearing above has units of

is known variously as the *wave impedance* or the *intrinsic impedance of the medium*. Assigning this quantity the symbol “

,” we have:

The ratio of the electric field intensity to the magnetic field intensity is the wave impedance

(Equation 9.4.33; units of

). In lossless media,

is determined by the ratio of permeability of the medium to the permittivity of the medium.

The wave impedance in free space, assigned the symbol

, is

Wrapping up our solution, we find that if

is as given by Equation 9.4.35, then

## Footnotes

Ellingson, Steven W. (2018) Electromagnetics, Vol. 1. Blacksburg, VA: VT Publishing. https://doi.org/10.21061/electromagnetics-vol-1 CC BY-SA 4.0

Get the latest tools and tutorials, fresh from the toaster.