topbanner_forum
  *

avatar image

Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
  • Wednesday May 15, 2024, 4:37 pm
  • Proudly celebrating 15+ years online.
  • Donate now to become a lifetime supporting member of the site and get a non-expiring license key for all of our programs.
  • donate

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - yksyks [ switch to compact view ]

Pages: prev1 ... 9 10 11 12 13 [14] 15 16 17 18 19next
326
I'm using the opportunity we have Steffen here and I'd like to ask about one problem. Just now I discovered the Mikogo Skype Extra--this seems to me miraculously simple to use, exactly for the purposes mentioned above. However, when trying to use it, the only result I always get is "Invalid input parameters" message. I tried it on two machines, one running WinXP SP2, the other Vista Business, both with Skype 3.8.0.115.

More, during installation and the first run the application didn't ask for permission to use Skype (as explained in the manual), and it's not listed in the "Manage API Access Control" list.

Thanks in advance for any idea, Steffen.

327
... IF you already have a cue file.

If you don't have one, try Cuesheet Heaven.

328
Found Deals and Discounts / Re: Camstasia alternatives
« on: April 25, 2008, 04:26 AM »
Frankly, except some experiments, I used it for a serious reason only once. It was a screen recording from Google Sketchup animation, which I published on a web site. All I can say it simply does all I expected. Reliable, easy to use, absolutely no problems.

330
Found Deals and Discounts / Re: Camstasia alternatives
« on: April 12, 2008, 03:36 AM »
And another online alternative: Jing. But I didn't try it yet.

331
Found Deals and Discounts / Re: Camstasia alternatives
« on: April 12, 2008, 02:26 AM »
An open-source alternative: CamStudio. It's in "2.5 Beta 1" stage for quite some time, but it works good. And output to SWF is very useful.

332
To f0dder:

Are you sure? I thought the XML contains just pointers to a real bitmap image of the disk! If you're right it's no disk image then. In fact so far I didn't need to restore the complete disk (luckily), just parts of damaged folders, and everything worked as expected.

333
Once the disk image is done it contains just the same as the original disk in binary form, so all filenames should be there exactly the same upon eventual restore process. This applies to all real disk image applications (but not backups).

To speak about Unicode makes sense only when browsing for individual files inside the image, and so far I've never encountered any problem with DriveImage XML and Unicode filenames. Why not to try it for yourself? ;-)

334
I regularly backup some 160 GB and this operation takes about 2 hours, or 6 hours when using compression (compressed to some 110 GB). But my backup is done on the internal SATA HD, if you're using external media it would be much slower (like any other application) and then the compression would pay off.

335
I'm quite happy with DriveImage XML. Easy to use, freeware, and besides, it has a unique feature: browsing the images, view and extract individual files.

336
General Software Discussion / Re: Drafting/Architectural Software?
« on: April 05, 2008, 08:59 AM »
Some time ago I've also tried some older version of 3D Home Architect, but abandoned it for Google SketchUp. Just finished the complete draft and even realized it. If you're not looking for a real professional software, this one is easy to learn and use, and it's freeware.

If you need a realistic rendering you could even try Kerkythea renderer, discussed recently at freewaregenius.

338
I vote against including it. It would just make FARR a bit more complicated and discourage some users. Not everyone is a keyboard maniac (like me). FARR can coexist with dedicated hotkey utilities like Hotkeyz or HotkeyP that are very easy to use and are for free.

339
Find And Run Robot / Re: "Hide on lost focus"-feature forgotten?
« on: March 31, 2008, 05:53 PM »
I hope it will be an option only! When I tried to test Launchy for a short time it was just this feature and its fuzzy search that put me off it very quickly. (I didn't intend to leave FARR, of course, I just wanted to know what Launchy is about.)

340
I can recommend SecureZIP, discussed here.

342
Living Room / Re: Am I too demanding, or are they all cheating?
« on: March 24, 2008, 06:28 AM »
Good I could save you from such a disillusion. I wouldn't buy it either, had I known this before...

I was thinking about using the wheel tilt, too, but it's a useful feature. Besides, when you need wheel-click and drag (in Sketchup), it wouldn't be very handy.

So, I'm getting used to the separate middle button. It really sucks, because I'm used to close tabs and applications with it and when I'm on my desktop I have to switch to a real wheel-click again, etc.

343
Living Room / Re: Am I too demanding, or are they all cheating?
« on: March 24, 2008, 05:23 AM »
Yes, hard to believe, isn't it? Look at the response of the überOptions author. No solution. Having written that, none of the mentioned cases has a solution. I just wanted to warn the community.

344
Living Room / Re: Am I too demanding, or are they all cheating?
« on: March 24, 2008, 01:51 AM »
@ TucknDar:

Thanks for the tip, überOptions looks nice, but I don't need to redefine all the buttons, I could do it with HotkeyP should I need it. The problem is that the wheel doesn't produce any signal, so there's no solution. The only mouse in the world...

@ tomos:

It has nothing to do with computers. The amplifier is deliberately wired as mono. Both the power amplifiers have theirs inputs wired together on a PCB, all the four inputs are connected to a single bus, even the input line RCA connector channels are short-cricuit together.

345
Living Room / Am I too demanding, or are they all cheating?
« on: March 23, 2008, 03:51 PM »
I'm starting this thread because recently I came across three different events that have something in common and I'd like to know someone else's opinion.

Here they are:

1. I bought a Logitech VX Nano mouse. The mouse itself is excellent, precise, elegant, reliable, etc. To my unpleasant surprise I found out that its wheel doesn't click. In fact, it clicks, but nothing happens. When pressed with more strength, it toggles the ratchet-scrolling mechanism and smooth scrolling. Perfect, by the way. There's also a button just below the wheel. It's by default assigned to "One-touch search", which is not a bad idea, but if you don't redefine it to middle click (or wheel click), you can't control some programs that are dependent on it (Google Sketchup, Google Earth, and auto-scroll in many applications). Even if you do, you're losing some productivity, because pressing the wheel is something different than moving the finger to another button and you have to think of it all the time and you make mistakes. Yes, it's true Logitech nowhere mentions that the wheel is clickable. But I believe this is the only mouse in the world, including all other Logitech mice, that lacks this feature.

2. I purchased Dell Inspiron 1720 laptop. Again, it's excellent in all aspects. During the customized ordering process I noticed under "Sound cards" that I can have for a small supplementary charge "Integrated SoundBlaster Audigy ADVANCED HD Audio". What a surprise when I realized that I have some poor SigmaTel Audio card. Okay, I thought, they made a mistake. Nope. Look what I've found: "It is not a sound card. It is a CD with software." Well, I have the CD. Yes, it's true Dell nowhere mentions explicitly that it's hardware.

3. I bought a Stagg PA System (PA4/200), with the specification of "2 X 100W RMS" output and it comes with two speakers. And again to my surprise I realized that despite it has two outputs, they are connected together. So this is not stereo. It's not even a dual channel amplifier. The both outputs are the same all the time, no way to split them. And again, yes, it's true Stagg nowhere mentions that this is a stereo or dual channel amplifier. It just has two outputs. Does it have two outputs? Yes, sir.

I can imagine one day buying a perfect car and the next morning realizing that I can't leave the garage, because the car lacks a reverse gear. But the manufacturer never mentioned it has a reverse gear...

There are some things in life I'd call reasonable assumptions. I believe that all cars can reverse. I believe that wheel mice have wheel-click. I believe that sound-card is a piece of hardware. And I believe that amplifier with two outputs is at least dual-channel. The common principle in all these three cases was that my assumptions were apparently wrong, let alone reasonable! However, I feel cheated. It's just impossible to study all the features and read all available reviews.

And now tell me: Am I too demanding, or just naive when I'm buying things based on evidently wrong assumptions? -- Anyway, you've been warned at least.

346
Find And Run Robot / Re: programing mouse buttons for FARR
« on: March 22, 2008, 05:04 PM »
You can use HotkeyP to redefine the middle-click to Break key. Just tried it, it works, but IMHO using mouse is against FARR idea, isn't it?

347
General Software Discussion / Re: Send link and/or webpage?
« on: March 22, 2008, 04:55 PM »
And I can recommend similar app I'm using for the same task -- Synergy.

348
I just had a look at startup delayer, and doesn''t seem like it's meant for this, but I appreciate the tip..


It does exactly what you need (and more), just enable the Advanced mode.

349
FARR Plugins and Aliases / Re: FarrUninstall plugin - v1.02
« on: March 19, 2008, 04:30 PM »
Fixed in 1.03, thanks a lot!

350
On the Evernote web page you can read "Evernote Wants You" and "If you would like to receive an invitation to the beta, please click here", and similar stuff. I tried to register twice, but nobody replied, not even an automated response. Apparently, they don't want me, at least... Try it and let us know.

Pages: prev1 ... 9 10 11 12 13 [14] 15 16 17 18 19next