Author Topic: NANY 2009 Release: Trout (audio player) (Read 746571 times)

brotherS · « **Reply #625 on:** January 18, 2011, 01:36 PM »

Workable? Yes. Perfect? No.

(As I can't set those off with one finger only.)

But I'll survive. :-)

skwire · « **Reply #626 on:** January 18, 2011, 01:38 PM »

(As I can't set those off with one finger only.)
-brotherS (January 18, 2011, 01:36 PM)

With Trout's hotkey system, you can assign single-key hotkeys. Unless I'm misunderstanding you...

brotherS · « **Reply #627 on:** January 18, 2011, 02:02 PM »

Yes, it was a bit confusing what I wrote. I'll find some workable solution, thanks. :-)

skwire · « **Reply #628 on:** January 18, 2011, 07:12 PM »

Website | Installer | Portable v1.0.5 build 23 - 2011-01-18 + Added Comment column. You will initially see it as the last column. Simply drag it to the position you want. For those that don't want it, you can hide it via the View menu. (Thanks, J. Elmes)

brotherS · « **Reply #629 on:** January 22, 2011, 04:09 AM »

I found a 'pause&rewind bug': when I pause Trout, then rewind or fast-forward, and hit play again, Trout resumes from the position where I paused it, NOT from where I rewinded or fast-forwarded to.

Lesmo16 · « **Reply #630 on:** January 22, 2011, 04:42 AM »

Well, that's a really nasty bug! I'll shred Trout from my system until it will be fixed.

skwire · « **Reply #631 on:** January 22, 2011, 10:40 PM »

I can't reproduce.

1) I start a track, let it play five seconds and click Pause.
2) I press and hold the fast forward button until the track is forty seconds in.
3) I click the Pause button and the track starts playing where it should (at forty-five seconds).

Is this what you're doing?

brotherS · « **Reply #632 on:** January 23, 2011, 03:38 AM »

I can't reproduce.

1) I start a track, let it play five seconds and click Pause.
2) I press and hold the fast forward button until the track is forty seconds in.
3) I click the Pause button and the track starts playing where it should (at forty-five seconds).

Is this what you're doing?
-skwire (January 22, 2011, 10:40 PM)

Yes. But I have the "Rewind track" option enabled, and you probably don't. And intuition tells me that's why you can't reproduce it.

skwire · « **Reply #633 on:** January 28, 2011, 09:01 AM »

Website | Installer | Portable v1.0.5 build 24 - 2011-01-28 ! With the "Rewind on unpause" option set, unpausing a track after advancing it (while paused) didn't work properly. (Thanks, brotherS)

brotherS · « **Reply #634 on:** January 28, 2011, 12:23 PM »

Thank you for updating, there's just one problem: WinRAR gives this error message: "The archive is corrupt" - could you check it and upload again? (I tried it twice.)

And one small suggestion: since you named it "Trout", how about renaming the files in the installer/archive from "trout" to "Trout"? Just for consistency.

skwire · « **Reply #635 on:** January 28, 2011, 12:38 PM »

Thank you for updating, there's just one problem: WinRAR gives this error message: "The archive is corrupt" - could you check it and upload again? (I tried it twice.)
-brotherS (January 28, 2011, 12:23 PM)

Odd. I re-uploaded it but you're probably going to have to clear your cache first. It should be build v1.0.5 build 25.

And one small suggestion: since you named it "Trout", how about renaming the files in the installer/archive from "trout" to "Trout"? Just for consistency.
-brotherS (January 28, 2011, 12:23 PM)

Done.

brotherS · « **Reply #636 on:** January 28, 2011, 02:32 PM »

Thanks, now it worked.

brotherS · « **Reply #637 on:** January 28, 2011, 05:07 PM »

Hmm... it seems the change introduced a new bug (or two). The "rewind track" option now sometimes doesn't work (it just resumes where I paused it), and when I...
- pause a tune at point A
- fast forward a minute or so to point B and
- resume it,
- then let it play for a minute or so to point C and
- pause it again and
- then resume it again,
it resumes at *twice* the set "rewind track" amount of seconds ahead of position B, *not* position C!

Quite an interesting bug!

skwire · « **Reply #638 on:** January 28, 2011, 05:11 PM »

I swear I'm going to take that feature out...

brotherS · « **Reply #639 on:** January 28, 2011, 05:22 PM »

Hehe... if it's too hard to fix, I prefer living with the "unpausing a track after advancing it" bug over NOT having the "Rewind on unpause" feature.

skwire · « **Reply #640 on:** January 28, 2011, 10:11 PM »

Website | Installer | Portable v1.0.5 build 29 - 2011-01-28 ! Maybe, for real this time, I actually got the "Rewind on unpause" feature working properly. (Thanks, brotherS)

brotherS · « **Reply #641 on:** January 29, 2011, 02:42 AM »

Woohoo, seems to work *perfectly* now!

panzer · « **Reply #642 on:** January 31, 2011, 03:36 AM »

Under View-Columns, I have only Title, time and and Filename checked. Now, when I move vertical border line from one of them to expand them, if I am not careful, others which are unchecked pop out. You have to put the cursor just right (the cross have only one straight vertical line and not two) so you can move the line to expand the one column you want.

Can you make a button which would enable only expaning of the columns and not opening the columns which are not selected?

skwire · « **Reply #643 on:** January 31, 2011, 06:08 AM »

Can you make a button which would enable only expaning of the columns and not opening the columns which are not selected?
-panzer (January 31, 2011, 03:36 AM)

You can choose 'View > Justify columns now' from the menu. You can also hotkey that action. Furthermore, I would suggest you unhide all the columns, move/drag all the ones you don't want to the right side of the listview and then re-hide them. This way, there's no hidden columns between your Title, Time and Filename columns.

panzer · « **Reply #644 on:** January 31, 2011, 11:39 AM »

Thanx.

panzer · « **Reply #645 on:** February 01, 2011, 02:25 AM »

Sorry for bugging you:

I have decided to have only Filename checked. I pushed a vertical line to the right so it is aligned with Trout border line. When I drag and drop a file into it, border moves to the left again.

Can I prevent that?

And please add Select all, Select none under View-Columns.

brotherS · « **Reply #646 on:** February 02, 2011, 03:18 AM »

Hmm... the last update seems to have introduced a new bug, not involving any rewinding or forwarding. Trout sometimes goes to "pause" by itself, keeping the same track loaded (if you press play, it will play the previous track again). I didn't find a way to reproduce it reliably yet.

(Random Play mode is being used)

skwire · « **Reply #647 on:** February 02, 2011, 04:35 AM »

Hmm... the last update seems to have introduced a new bug, not involving any rewinding or forwarding. Trout sometimes goes to "pause" by itself, keeping the same track loaded (if you press play, it will play the previous track again). I didn't find a way to reproduce it reliably yet.
-brotherS (February 02, 2011, 03:18 AM)

I've never experienced this. Has anybody else seen what brotherS is describing?

skwire · « **Reply #648 on:** February 02, 2011, 04:40 AM »

I have decided to have only Filename checked. I pushed a vertical line to the right so it is aligned with Trout border line. When I drag and drop a file into it, border moves to the left again.
Can I prevent that?
-panzer (February 01, 2011, 02:25 AM)

Do you have the following checked?: Menu > View > Auto-justify columns on load

And please add Select all, Select none under View-Columns.
-panzer (February 01, 2011, 02:25 AM)

Agreed. I need to update that to a list with checkboxes like some of my other apps.

kilele · « **Reply #649 on:** February 02, 2011, 07:33 AM »

Could you support AMR files ?
It's a format used by cell phones to record voice