very puzzled by this

[hissho]

HI
I'm running Visa home premium and it seems URLSnooper just wouldn't recognize my network adaptor?

Please see my attached screenshots.

Any help would be much appreciated,
hissho

[mouser]

It's detecting the Marvell but not the intel.
I do not understand why Winpcap *STILL* has trouble with the intel cards.. it's been a long standing issue with winpcap and it's completely beyond me why it never gets solved, but it's out of my hands.

[hissho]

I tried to disable Intel and use Marvell only. but it seems the problem still persists....

[mouser]

forget about auto-adapter detection, disable that if there is any doubt, it's just a convenience.
the main thing is to set your adapter, start sniffing, and see if the packet count starts increasing in the status bar as you surf the web.

[hissho]

On another computer that URLsnooper works, i always get more and more packets showing up when i visit websites.
With my current PC, i noticed there's a line at the bottom saying "sniffing network traffic from WinPCap Marvell Gigabit Ethernet controller (IP 10.120.1.25)
and i never got any packets showing up....

what's wrong?

[mouser]

is your pc connected using the wifi intel card? if so that's why. it's only sniffing on the marvel card.

[hissho]

Nope. I've disabled wireless connection and am using an Ethernet connection using Marvell...

[hissho]

and now i feel even more puzzled.

according to the line at the bottom, it is working but i don't think it is working properly...only 2 packets sniffed???

[Shades]

You did not set (by accident) a filter of some kind?

Sorry, I'm a WireShark user myself...and do not know too much about URLsnooper. But it is my experience that a filter can be turned on by default, without realizing that (immediatly).

[hissho]

usually i turn on the "multimedia URL" filter
i am not using any filter for now to let the developer know that it's receiving very few packets...