Topics

1

General Software Discussion / Software to restrict wireless internet connection to other devices at X hours?

« on: October 15, 2012, 12:59 AM »

I’m having an impossible time finding a software (Windows XP) to install on ‘my’ computer (server) to restrict ‘other’ devices (laptops, hand phones, etc) from accessing the wireless internet at X hours.
It is ‘not’ an option to install the soft on the devices that I want to block at X hours.
It must only be installed on my computer to block selected devices while other devices are still able to access the internet.
So simply unplugging the modem isn’t an option.
It could be a software that blocks X devices from any network connection (including internet) during X hours.

Also note that my router is NOT able to do as I use one supplied by ISP and this feature has been left off (confirmed). Nor am I going to use a different router.

If you know of any that meet this critea please post them, Thx! :))

2

General Software Discussion / Unistall feedback :D

« on: October 05, 2010, 10:24 PM »

3

Mircryption / CBC FUNCTIONS v1.0 - can't find package blowfish

« on: April 28, 2010, 11:00 PM »

Sorry if this has been posted before- I didn't see it, which surprises me:

The install instructions state:
INSTALL
=======
Copy the /lib dir to your /eggdrop/lib dir
Copy the cbc_functions.tcl file to your /eggdrop/scripts dir
Load the script in eggdrop.conf
    ex.: source scripts/cbc_functions.tcl
   
I have done that, but bot gives error:
CBC:
can't find package blowfish
    while executing
"package require blowfish"
    (file "scripts/cbc_functions.tcl" line 14)
    invoked from within
"source scripts/cbc_functions.tcl"
    (file "bots.conf" line 1376)
* CONFIG FILE NOT LOADED (NOT FOUND, OR ERROR)

I've also tried:
-uploading lib dir to a variety of places
-uploading the contents of lib dir to a variety of places
-uploading the files in the lib dirs to scripts/ dir
(There is not an existing lib dir in the eggdrop dir)
All have same error.

Note- this bot is on a rented server, so if I need to install those packages I won't be able to myself.
Thank you

4

Post New Requests Here / Save Window's cmd.exe line events to a text file- recorder

« on: March 19, 2010, 04:48 AM »

An add-on to Window's cmd.exe so that a user is able to save event logs from the command line.
-You have executed something that is too long to scroll back and copy all the output.
 

5

Living Room / Nice site found while looking for right click/copy path extension

« on: February 25, 2010, 01:51 AM »

While I was looking for a shell extension so that I could right click on any file and or directory and be able to copy path and or file to my clip board, I found http://www.codeunit.co.za – Software, Code, Technology and Tutorials that I thought I’d like to share here.
Why is he not here already? :p



Though he didn’t write the copy path extension (Author’s website is gone) he does offer it for download:
http://www.codeunit....sion/comment-page-1/
So far it’s my fav copy path extension

6

Post New Requests Here / IDEA: Log changes to registry only during installation of software only

« on: October 14, 2009, 04:11 AM »

I found one that does almost everything and after thinking about it, realized it needed to operate in the manner it does. In any case it is InstallWatch, Free, http://www.epsilonsquared.com/

 

7

Mircryption / WeeChat Version 0.3.0 is released ! :)

« on: October 07, 2009, 04:40 AM »

From here: http://www.weechat.org/
on Sept. 6, 2009
Version 0.3.0 is released, after 2 years of work and more than 1000 commits!
This is a major upgrade since last stable, please read files UPGRADE_0.3 and ChangeLog for list of changes: configuration files and plugin API are not compatible with previous versions.
For this important release, site has moved to weechat.org, with a new look!
Enjoy WeeChat!

Gothi[c]  excited? keke

8

Mircryption / Using IRSSI / blowssi.pl how to keyx | auto exchange keys?

« on: September 10, 2009, 11:59 PM »

I use a bot that needs me to have a 'keyex plugin' to auto exchange keys (not my bot). Is this possible with blowssi? It's also very useful just for when any user msg's you and you don't each need to exchange keys.

Here are some things I have tried:
 -!- Irssi: Starting query in EFNet with *****
<******> get a keyex plugin!
/keyx
-!- Irssi: Unknown command: keyx
/quote keyx
-!- keyx Unknown command
/auto_keyxchange=1
-!- auto_keyxchange=1 Unknown command
/keyx *******
-!- Irssi: Unknown command: keyx


Thank you

PS: Gothi[c] any update on blowssi for weechat?

9

General Software Discussion / An easy software to make street/road maps?

« on: July 21, 2009, 09:16 PM »

I'm looking for recommendations for an easy good software to make street maps.
Most likely to take, for example, a google map for correct proportions and then turn it into my own design.

Thank you

10

Mircryption / How to change users prefix from mcps to +OK or ecb?

« on: July 12, 2009, 11:35 PM »

Reason why:
There is one user that a fish encrypted bot won't respond to.
I noticed that any user that their text is prefixed 'ecb' or '+OK' bot will respond, but not those that have: mcps

Is this a simple setting to change in Mircryption?

Thank you very much! 

11

Mircryption / Please I need help with blowssi/mircrytpion: 3 problems

« on: July 09, 2009, 02:13 AM »

I'm running I'm running: Linux Debian /lenny2 OpenSSL/0.9.8g

1. KEY WITH SPACES: What is the proper way to /blowkey #channel if the key has spaces in it?
Doing this /blowkey #channel i am the key , sets key to: i
Doing this: /blowkey #channel 'i am the key' , sets key to: 'i etc.
I finally just edited the blowssi.conf and put that key in myself- works.

2. NOT DECRYPTING ALL USERS: I can't read all users.. they just aren't decrypted (they can read me).. and for those that I can't read they have before their text: mcps.. if that matters?. Where I have before my text in non cbc key channels: ebc, and in cbc key channels: cbc
example (channel not using cbc: in their key):
<Me{ecb}> testing
<@User1> mcps 47mZ81W/Ra9/NtcTzL0898.Z1KX1.4ItNZ0AOzp9/nsngD.XvAGK0
<@User1> mcps qw/3z./Bl.
<@User1> mcps v.K971Ojq9Wgl606IUzj0it1lL1Bqx3R1oSh39/zXK.JHpOW/
<Me{ecb}> I can't read you
<User2{ecb}> test

3. AUTOLOAD: What is the proper way to have it autoload/or accessible for all users?
I have installed irssi system wide (as root). According to the README to have blowssi autoload:
pico /root/.irssi/startup (this is where it is for me)
put:
/load ~/.irssi/scripts/blowssi.pl

When I start irssi up as a user it didn't autoload.
So then I:
cp /root/blowssi-0.0.2/blowssi.pl /usr/share/irssi/scripts/blowssi.pl
mkdir /usr/share/irssi/scripts/autorun
ln -s /usr/share/irssi/scripts/blowssi.pl /usr/share/irssi/scripts/autorun/blowssi.pl
Still didn't autoload.
I issue the cmd as user: /load ~/.irssi/scripts/blowssi.pl
get error the file not in my home dir. So finally I just set it up in my home dir:
mkdir /home/me/.irssi/scripts
mkdir /home/me/.irssi/scripts/autorun
cp /root/blowssi-0.0.2/blowssi.pl /home/me/.irssi/scripts/blowssi.pl
ln -s /home/me/.irssi/scripts/blowssi.pl /home/me/.irssi/scripts/autorun/blowssi.pl
Still didnt auto load, but it did accept the cmd: /load ~/.irssi/scripts/blowssi.pl

Thank you!

PS. I'm pretty sure I've installed all that is needed: dpkg -l
For perl
perl 5.10.0-19 Larry Wall's Practical Extraction and Report Language
perl-base 5.10.0-19 minimal Perl system
perl-doc 5.10.0-19 Perl documentation
perl-modules 5.10.0-19 Core Perl modules

For Crypt::ircBlowfish
libcrypt-cbc-perl 2.29-1 Implementation of cipher block chaining (CBC) mode
libcrypt-blowfish-perl 2.10-1+b1 Blowfish cryptography for Perl

For Crypt::CBC
libcrypt-blowfish-perl  2.10-1+b1 Blowfish cryptography for Perl
libcrypt-cbc-perl 2.29-1 Implementation of cipher block chaining (CBC) mode

For MIME:Base64
libmime-types-perl 1.24- Perl extension for determining MIME types and Transfer Encoding
perl-modules 5.10.0-19 Core Perl modules

12

Mircryption / MCBoard is under appreciated: Even Fish users can use this! Here’s how:

« on: June 01, 2009, 12:38 AM »

IMO this is thee best newsboard for IRC out there, period. Its like having a secure forum in your channel. Completely encrypted- no passwords are stored on shell, in telnet it is not de-crypted, in channel if they don’t have the key they can’t read it or even access it. Its so easy to setup, etc etc

Thank you to mouser for 1.) the program and 2.) the never ending patience to help me set this up for users in my channel that don’t use mircryption (tsk tsk on them).

This is for eggdrop owners- assuming you have this installed on your bot already:
*If you don’t have mcboard installed on your eggdrop, it’s as easy as any tcl script if not easier- find files in the micryption suite package (URL for it, see below for users).

1. Edit this file: tcleggdrop_mcps_sitesettings.ini
Under this section:
# Optional prefix indications
set mcpsprefix(#mircryption) "mcps"
set mcpsprefix(#blowcrypt) "+OK"
set mcpsprefix(defaultprefix) "mcps"

Edit it to:
# Optional prefix indications
set mcpsprefix(#your.channel.name) "+OK"
set mcpsprefix(#mircryption) "mcps"
set mcpsprefix(#blowcrypt) "+OK"
set mcpsprefix(defaultprefix) "mcps"

(replace ‘your.channel.name’ with the name of the channel you want to use mcboard)

That’s it!


This is for naughty non-mircryption users (maybe mouser will make a package & install doc to download just these files *hint hint ;p) :
1. Download mircryption suite. https://www.donation...n/downloads_main.php
Mircryption Suite v1.19.01
2. Rename this setup.exe file to .zip and unzip it . (warning: some virus softwares will give warnings/ and or eat your files, if you need to disable it while getting to those files)
3. Locate these 3 files:
mcboard.mrc
mircryption.dll
mircryption.mrc
4. Create directory ‘mircryption’ in your mirc directory. Copy those 3 files into it.
5. Load mcboard.mrc& mircryption.mrc:
mIRC/Tools/Script Editor/File/Load <-do this for both files

6. Find out from the bot owner/the one who has set up the mcboard:
   a. encryption key for board
   b. which bot is for the 'newsboard'
   c. name of the newsboard

7. To configure mcboard:
   a. Right click on the bot that is for the mcboard in #channel /choose 'configure bots.name as newsboard'
   b. enter encryption key that you were given above
   c. pass can leave blank (this is for bot owners)
   d. NAME OF BOARD MUST BE: what bot owner gave you

Done

To use board, right click on channel window/MCBoard/ <-choose from a variety of options

13

Mircryption / Ever have problem with bot not encrypting 2 or more lines of text? Proper fix:

« on: June 01, 2009, 12:35 AM »

Settings on `tcleggdrop_mcps_sitesettings.ini’ should be:
set mcreplyonlyinkind "false"
set mcreplyneverplaintext "false"
set mcdontlistentoplaintext "false"

(the last 3 are set to true)

Thank you mouser for fixing that the proper way keke

14

Mircryption / Where oh where are you: mcboard for eggdrop?

« on: April 10, 2009, 08:57 PM »

I just can not find it on the site or in the suite. The ‘mcboard for eggdrop bot’ (not local sever). I use to use this and I have found in ‘my’ old files the ‘mcboardbot.tcl’ only. Its a great addon to the suite! According to this file I would also need: mcboardbot.exe & mcb_options.cfg. All of these files I can’t find now. Am I looking in the wrong places?

Thank you