there was a similar request on this post
but the person asked for a reason that was already fulfilled by the existing builtin tool.
the builtin tool (im sure your all familiar so i'll be brief) has a little green icon in the system tray; when single clicked, lists removable drives and when clicked, they will be "safely removed". It also has a double click window which imho is less useful and more prone to mistakes, so i dont care if it has this; but it could be added if the coder wants.
this tool for the most part works perfectly, for removable hard drives and flash drive sticks, which plug into usb, or firewire; it OFTEN works on sata hard drives, but this depends on drivers for the card/chipset in question. the reason it does NOT work right is this: (going on half speculation) the driver coding team, must impliment SOMETHING which allows windows to know that this device is allowed to be safely removed. before you jump on me saying that some sata controllers simply do not support hotswap, i must stop you right there, please continue reading.
i have a asus m2n32-sli deluxe motherboard. it comes with two onboard sata2 controllers, one with 6 ports internal, and one with one internal, and one external. the 6 port device runs on the nvidia chipset; the other runs a SiI 3132 chipset. both of these controllers DO support hotswap, which i have confirmed with the KB on their respective sites. however, the SiI site says this in their documentationhttp://18.104.22.168/al/12/106/10744.htm
(this url is linked from SiI site, confirm if you wish, siliconimage.com then support, knowledge base, it puts you on a page with 22.214.171.124 ... then search for "hot plug", the title is called "SATA: Hot Plugging Drives Under Windows 2000/XP"
This feature is not explicitly highlighted in our current drivers, but all SATA controllers from Silicon Image do support hot plug capability. To remove a drive from a powered up system, do the following:
* Enter the Windows Device Manager (through Control Panel or right clicking on My Computer and going to Properties)
* Go to Disk Drives and find the disk you want to remove
* Right click on the desired disk drive and select Remove/Disable
this works, of course, but it is annoying to do all the time for my hotswap bay, which is hooked up to the SiI plug, the app i would love if somone coded, would either be able to detect all sata and removable drives, and correspoding drive letters, and when clicked, allow that procedure to be done
however i would much prefer if it was customizable (might be outside of scope of this site) to have a include only or exclude list so that i could say... list only usb drives, and the one sata2 port i use for hotswap... and not the other 6 ports as most of my drives are the same model, and its sometimes hard to differenciate between them