Recent Posts

1401

Living Room / Re: location triggers for android

« Last post by Ath on November 03, 2014, 04:26 PM »

You asked nearly the same question a couple of days ago... (and got basically the same answers)

1402

Living Room / Re: This into that

« Last post by Ath on November 03, 2014, 10:12 AM »

Something like this: http://www.onlinecon...me_cylinder_tank.htm ?

1403

Living Room / Re: This into that

« Last post by Ath on November 03, 2014, 08:52 AM »

What's the unit to convert to? (n00b question maybe, or I just don't understand: Volume to Volume stays the same, AFAICS) cubic to cylindrical is just a different shape to me.

1404

Screenshot Captor / Re: feature request for auto-screenshot

« Last post by Ath on November 03, 2014, 07:25 AM »

- there is a minor problem: rate is always not precise (i set 5 ms, the result is 5 or 6; i set 8, the result is 8 or 9...)

-adamantine (November 03, 2014, 07:03 AM)

Sounds like a totally different problem: Taking a screenshot every 5 milliseconds is probably faster than Windows can store the image on disk, so the next one might be a bit delayed...
And needing that feature, a more efficient solution might be to make a screen-movie, instead of a bunch of separate image files, that are not stored very efficient, compared to a (usually stored compressed) movie.
You might better use ESR (Easy Screencast Recorder) for that.

1405

General Software Discussion / Re: Arrow suggestion

« Last post by Ath on October 31, 2014, 05:03 AM »

You can choose on what side a shape is added by setting the appropriate Endpoint Shape for Start and/or End when the Arrows feature is activated

1406

Living Room / Re: android app to set my vibration mode on specific hours

« Last post by Ath on October 29, 2014, 07:22 AM »

In the log, it says many times: 'Not added to any areas.'
Not sure what that means.

-kalos (October 29, 2014, 05:55 AM)

You should long-press that message and choose "Add to area", and add it to your current area (Home? )

There is a Learning mode for Areas (long-press an Area, "Start Learning Area"), that you can set for a specific time, and during that time all GSM antennas detected will be added to that area (while you are walking around the house, or at work etc.).

1407

Living Room / Re: Android shortcuts

« Last post by Ath on October 28, 2014, 04:59 PM »

An android app should specifically support that feature, so you should probably ask the vendor (or search the help/docs) if they support that. I'd expect the app to have a feature of 'Create start-screen shortcut' or something similar.

1408

N.A.N.Y. 2015 / Re: NANY 2015 - NEW APPS FOR THE NEW YEAR 2015 - START YOUR ENGINES!

« Last post by Ath on October 28, 2014, 04:53 PM »

complete a certain number of coding snack requests

-app103 (October 28, 2014, 01:28 PM)

What's that number? And who decides?

1409

Found Deals and Discounts / Re: CintaNotes Giveaway + 30% Discount

« Last post by Ath on October 27, 2014, 03:44 AM »

Also wanted to ask Ath, how's that review coming? 

-jenter (October 27, 2014, 03:37 AM)

Been quite busy (made a foreign work-trip, and some time-consuming projects), so I didn't get to it yet, sorry about that. Still on my agenda though

1410

DonationCoder.com Newsletters / Re: Super-sized Newsletter for Oct 25, 2014 - Codename: NANY 2015 Preppers

« Last post by Ath on October 25, 2014, 01:50 PM »

^ That 

(browse previous year entries here)

-mouser (October 25, 2014, 07:53 AM)

I think a link is missing 'here'?

1411

Living Room / Re: auto wifi

« Last post by Ath on October 25, 2014, 11:59 AM »

Android wifi with credentials doesn't auto connect?

-rgdot (October 25, 2014, 11:55 AM)

The WiFi does connect, but the proxy/router asks for confirmation or credentials before you are allowed to access the outside world.

1412

General Software Discussion / Re: Satnav for android

« Last post by Ath on October 22, 2014, 12:39 PM »

You should really try Sygic*, its partly free, and fully usable off-line (without internet connecton) if you pre-download the maps when still on WiFi.

* No connection to the company.

1413

Living Room / Re: android app to set my vibration mode on specific hours

« Last post by Ath on October 22, 2014, 12:28 PM »

This is because I set it to set my sound profile to silent, from 9am to 5pm when I am at work, and it didn't restore it at 5pm to 'normal profile'!
How can I do this?
Do I have to set another event trigger to set my phone to 'normal sound profile' each weekday after 5pm?
Same with WiFi, while it disabled wifi while I was at work, it didn't re-enable it, at 5pm.
Any hint?

-kalos (October 22, 2014, 11:09 AM)

That is exactly how you should configure that. Create another trigger running from 5pm, to restore earlier settings. The standard provided triggers actually pointed me in that direction from the first time I looked at it...

1414

Living Room / Re: android app to set my vibration mode on specific hours

« Last post by Ath on October 21, 2014, 04:00 PM »

Oh, and llama, first one I mentioned, is what I actually use and depend on for several years now. No relation to the developer, just a happy user

1415

Living Room / Re: android app to set my vibration mode on specific hours

« Last post by Ath on October 21, 2014, 03:58 PM »

A similar app, though I didn't try it, but is one of the suggestions that is actually recently updated, is Atooma, it has a loooong list of possible triggers/conditions

1416

Living Room / Re: android app to set my vibration mode on specific hours

« Last post by Ath on October 21, 2014, 03:45 PM »

Check out llama, it is able to switch profiles on several conditions, like time/day, cell-phone location, Wifi networks available, etc.

1417

General Software Discussion / Re: Firefox Extensions: Your favorite or most useful

« Last post by Ath on October 17, 2014, 05:53 AM »

Firefox 1.5 Final

-mackyy20 (October 17, 2014, 04:51 AM)

Wasn't that released somewhere in 2005? Looks like waaaay off the charts here... (iow: possible spam? )

1418

Screenshot Captor / Re: LATEST VERSION INFO THREAD - ScreenshotCaptor - v4.9.1 - Oct 10, 2014

« Last post by Ath on October 13, 2014, 02:44 AM »

I had it yesterday from my home connection, and now at work which is a totally different provider, though in the same country

1419

Screenshot Captor / Re: LATEST VERSION INFO THREAD - ScreenshotCaptor - v4.9.1 - Oct 10, 2014

« Last post by Ath on October 13, 2014, 01:52 AM »

Mouser, can you also update the .dcupdate file on the website so a Check for Updates action from SSC 4.9.0 provides the opportunity to update to this latest (4.9.1) version?
And besides that, the download speed for SSC is horrendously slow, ~30 kB/sec, and that's not something I saw happening before from the DC servers...

1420

General Software Discussion / Re: Launch everything within a folder

« Last post by Ath on October 11, 2014, 03:31 PM »

Isn't that a standard feature of FireFox? In the Favorites menu (possibly right-click, on a tablet atm, can't check now)

1421

General Software Discussion / Re: Mind Mapping Software - What are the current top players now?

« Last post by Ath on October 07, 2014, 02:00 AM »

For the simple mind-mapping tasks I have, I've been using FreeMind, a SourceForge project that is IMHO worth a look.

1422

Living Room / Re: Win9 will be FREE!

« Last post by Ath on October 02, 2014, 04:01 AM »

As it turns out, Java lets you do stupid stuff like this. 

https://searchcode.c...28%22windows+9%22%29

-app103 (October 02, 2014, 03:07 AM)

That's not Java to blame, just stupid/sloppy/lazy programming, and people tend to repeat their mistakes

1423

Living Room / Re: When you make your 100'th Post

« Last post by Ath on September 28, 2014, 10:49 AM »

  "I love it when a plan comes together"

1424

Living Room / Re: When you make your 100'th Post

« Last post by Ath on September 28, 2014, 07:51 AM »

I'll just post my own 2222th message, though it's not particularly spectacular, imho:



I kinda expected an easter egg to be displayed for this (pretty) number by the forumsoftware, but it didn't

1425

General Software Discussion / Re: Linux bash exploit discovered

« Last post by Ath on September 26, 2014, 12:05 PM »

env x='() { :;}; echo vulnerable' bash -c "echo this is a test"

-40hz (September 26, 2014, 08:42 AM)

That's the simple test, but this one still shows the date/time of execution after patch 1 is applied:

[Select]

rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo date'; cat echo

After applying the second patch it should just do nothing, afaik.
Oh, run it in an empty directory, just to be safe, it will delete, and can create, a file called echo