Messages

1

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 16, 2011, 12:18 AM »

Looking good!! It starts up without any complaints; I can backup/restore/verify the database without any errors; and I have clipped and pasted several text and graphics all without incident! Here's my latest statistics (notice the default temp location!):


I'll keep playing but it looks the best so far! Thanks!

2

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 14, 2011, 10:13 PM »

I uninstalled the version that works good, and installed your latest version. Immediately on startup it threw

I clicked OK and it went away. I then went into options to change the tweak Temp Directory setting and when I clicked "Accept" I got

followed by

Left-clicking on the tray icon gives me

every time I left-click on the icon. When I open the main window it looks wrong

I have exited and restarted CH+S with the same reults.

This is the same thing that has happened the last three times I have tried your "latest" versions.

3

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 14, 2011, 06:09 PM »

Nope. Still no good, no matter what I set the temp file tweak setting to.

Bringing CH+S up the first time after the new install it throws

and throws this every time I left-click the tray icon, too.

Shutdown and restart CH+S gives me this upon starting

and every time I left-click the tray icon.

4

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 14, 2011, 05:19 PM »

As you can see, it's set to the same setting as the version that doesn't throw errors:

5

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 14, 2011, 04:45 PM »

I don't know what you did, but you went backwards. Just downloaded "latest" version per your request

Mark and spknapp,

Can you download the latest alpha and give that a whirl?

and upon starting it up was promptly presented with

clicking OK dismissed it. I get the same error EVERY time I left-click on the tray icon. Bringing up the main window give me a bad looking one

so I closed down CH+S. Upon restarting the program I am presented with

and clicking OK dismissed it. Again, every time I left-click the tray icon I get


I'm going back to the version I loaded yesterday because it was working perfectly fine.

6

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 13, 2011, 11:58 AM »

The restart went just fine. I am not experiencing any errors (for now). I can backup, restore, and verify the database. I did what deepskytraveler tried (#43 - went into the grid and did a <Ctrl-A> to select all and dragged to the recycle bin in the left pane) and it worked fine - I even restored that database and all my clips were back. It is behaving very nicely right now. AND it seems to be playing well with "Snippet Tool". I even reinstalled the IE spell checker "Speckie" that I suspected yesterday might be causing trouble and everybody's behaving like good little children.

I'm keeping my fingers crossed!

For giggles here's a scrape of my statistics:

7

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 13, 2011, 09:44 AM »

Just starting up my PC this morning I was greeted with:


Left-clicking the tray icon gave me:


Right-clicking and bringing up the main window worked, but the window didn't look right, so I closed out CH+S. Then I downloaded and installed your "5:23AM" update and applied the tweak for the temp directory. It seems quiet for now. I even removed the exclude entry from MSE and it seems to be behaving (for now). It even let me use the "Snipping Tool" without barfing. I am going to shutdown and restart my PC to see if the startup error from CH+S goes away. I'll report back on it's behavior. FYI - here's a shot of the statistics:


Maybe you're on to something here...

8

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 12, 2011, 11:29 PM »

Oops, spoke too soon - I just got this doing a <Ctrl>-C:

and

I had to kill it with Task Manager/Process Explorer (SysInternals utility)

On to your requests...

exit program and restart it.

(stop as soon as you see any error when performing steps below):

give it a second or two to start up -- does it show balloon messages about starting up and being ready?

It never has shown any balloon messages about starting up and "Show Startup Tray Messages" is checked. Now on restarting it gives me

and

and

and

and

ok now right-click on the icon and choose "show main window"

does the main window show ok? and no errors yet?

Yes

if so, go to menu View->Options and then "Backup/Maintenance" tab, and click the "Now" button located at top middle.

any errors yet?

OK for now. I can backup, restore, and verify the database without errors. (for now)

FYI


And creating that caused

and

I was using the Windows 7 "Snipping Tool" to create that Statistics print for you. I'm feeling a pattern here....

Steve

9

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 12, 2011, 10:31 PM »

I've loaded your "latest" (9:30PM) version and it seems quiet for now anyway - with MSE real-time turned off. Here's answers to some of your questions:

Here's another thing I'd like you to look for:  If you go to C:\Users\USERNAME\Documents\DonationCoder\Clipboard Help+Spell\Database\Temp
do you see numbered files in that directory? Like "123456.dat"?

Yes

Also, can you try this:
From Layouts menu choose "Standard", and then take a screenshot and post it -- i want to see if you have the proper groups tree.

Run it and go to options and then the last "Statistics" tab, and screenshot that and post screenshot.  That will now tell us something.

Bingo! When I turn MSE real-time back on I start getting DBISAM access denied errors. I added C:\Users\Steve\Documents\DonationCoder to the MSE exclude list and CH+S seems to be behaving itself. Now why did it just start up several days ago when I had been running v2.3.1 since early August without telling MSE to exclude that folder?

Bizarreness...

10

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 12, 2011, 08:00 AM »

First time starting it up after install I get


When I bring up the main window it looks like this
[attach=#2][/attach]

So I exit and restart it

does it show balloon messages about starting up and being ready?

No, it never has

no errors yet?

None yet

ok now right-click on the icon and choose "show main window"

does the main window show ok?

Yes

and no errors yet?

Not yet

I just got this doing a <Ctrl>-C composing this message


Followed by

if so, go to menu View->Options and then "Backup/Maintenance" tab, and click the "Now" button located at top middle.

any errors yet?

That was OK. I can also restore that backup OK, and when I click "Verify or Repair Database" it doesn't error.

Bizzare indeed...

Thanks,
Steve

11

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 11, 2011, 11:12 PM »

Ok guys so see if this fixes the ridiculous error

-mouser (October 11, 2011, 10:04 PM)

Yeah, I don't get that error any more, but everytime I left-click on the tray icon I get the


I also see a lot of

12

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 11, 2011, 07:15 PM »

does the error really say "Modifactionate"?

Heh, heh... Yes it really says "Modificationate".

when you ran chs for the first time, are the clip folders all empty?

Yes, like I said I:

made sure all their respective program folders were gone, deleted C:\Users\Steve\Documents\DonationCoder

I'm flummoxed?

Thanks,
Steve

13

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 11, 2011, 06:35 PM »

Have you ever had one of those moments where all of a sudden it hits you like a Mack truck? Well ... as I was typing in my reply and watching my spelling be automatically corrected (because I was laughing at it having questions about words like ConfigDir, DBISAM and QueryClipHelper), it dawned on me that part of the name of this product is **SPELL**, but CH+S wasn't doing my real-time spell checking. On Thursday I had installed "Speckie", a real-time spell checker. Those two boys apparently don't get along. So I uninstalled CH+S, Speckie, and IESpell, made sure all their respective program folders were gone, deleted C:\Users\Steve\Documents\DonationCoder, remove any stray registry references to the three spell checkers I had just uninstalled, rebooted my PC, and finally resintalled CH+S v261.

But, I'm still getting errors. I am still getting the errors when I click on the tray icon, click on "U - All clips", click on "5- Virtual folders", click on "2- Clips with images" I get "Error DB65: DBISAM Engine error #11949 SQL Parsing error - Expected column name but instead found Modifactionate Time in SELECT SQL statement at line 1, column 220" then when I click <OK> sometimes I get: "DBISAMQueryClipHelper: Cannot perform this operation on an open dataset." I don't get an error if I am in the main window and in the tree click on "Clips with Images", though.

I can save and restore database, and sometimes even verify databases. When I click on "Verify or Repair Database" sometimes I get: "DBISAM Engine Error #11013 Access denied to table or backup file 'ClipTable'".

I got this once when doing (for this post) some <Ctrl>C or <Ctrl>X work: "Error DB65: DBISAM Engine error #11013 Access denied to table or backup file '4201'" then "Error EX63: Operation aborted".

Oh, and it didn't make any difference whether MSE real-time monitor was on or off.

What's next, boss?

Thanks,
Steve

14

Clipboard Help+Spell / Re: Error EX4: DBISAM Engine Error #11013

« on: October 11, 2011, 12:08 PM »

I, too, have all of a sudden started receiving tons of errors after running 2.3.1 fine for some time.

When I click on the tray icon, click on "U - All clips", click on "5- Virtual folders", click on "2- Clips with images" I get "Error DB25: DBISAM Engine error #11949 SQL Parsing error - Expected column name but instead found Modifactionate Time in SELECT SQL statement at line 1, column 220" and then "DBISAMQueryClipHelper: Cannot perform this operation on an open dataset" every time.

Other errors I get at various and sundry times are:

"Error DBISAM Engine Error #11013 Access denied to table or backup file '41320'" (sometimes 53720) and when I click OK I get "Error EX27: Operation aborted" then sometimes I get the 41320 again.

"DBISAM Engine Error #11051 Filter error for the table 'ClipTable' - Expected expression but instead found ) in filter expression in line 1, column 6"

"Error DB65: DBISAM Engine Error #11013 Access denied to table or backup file '76040'"
"Error DB65: DBISAM Engine Error #11013 Access denied to table or backup file '72800'"
"Error DB65: DBISAM Engine Error #11013 Access denied to table or backup file '72801'"
"Error DB65: DBISAM Engine Error #11013 Access denied to table or backup file '81360'"

"Error DB65: DBISAM Engine error #11989 SQL parsing error - Expected expression but instead found ) in SELECT statement at line 1, column 148"

Sometimes when I click on the tray icon and click on "W - Show main window" I get "Error DBISAM Engine error #11013 Access denied to table or backup file '8601'"

I have tried uninstalling, deleting the program folder, deleting the C:\Users\Steve\Documents\DonationCoder folder, changing the ConfigDir.ini setting of CONFIGDIR=%MYDOCUMENTS% (which didn't change anything BTW),  used registry editor to delete all references to "ClipboardHelp" or "Clipboard Help", then reinstalling; I have tried upgrading from 2.3.1 to 2.6.1; all I get now are errors. Clicking on "Verify or Repair Database.." does nothing. I can usually backup and restore the database (sometimes with nothing seeming to happen e.g. no error pops up nor any confirmation message). I must have some sort of permission problem somewhere but I don't know where?

I am running Windows 7 Ultimate with 4GB RAM on an Intel Core 2 Duo 2.4GHz CPU and I'm running Microsoft Security Essentials. I was running CH&S v2.3.1 until upgrading this morning to 2.6.1 (hoping that would fix some errors?).

I really liked using this product but i doesn't work for me anymore. I hope you can help?

Thanks,
Steve