Recent Posts

4751

N.A.N.Y. 2016 / Re: NANY 2016 Pledge/Alpha: Mouser's Media Browser

« Last post by mouser on May 12, 2016, 08:20 AM »

Detail's-view Mode' feature; But as an optional extra panel rather than a replacement of either the filmstrip or grid view.

yeah i think a small detail panel, showing details about the currently selected file would be a good idea.

4752

N.A.N.Y. 2016 / Re: NANY 2016 Pledge/Alpha: Mouser's Media Browser

« Last post by mouser on May 12, 2016, 08:17 AM »

Ok finally let me try to reply to these posts!

First, thanks for the info about the on-top behavior hiding the about box.
All of the behavior you describe about the program being unresponsive is all due to the fact that a dialog (about box) was behind the main window which was forcing itself on top.
This is a bug that has been seen in a couple of my other programs -- i need to remember to not let it creep back in!
I occasionally see it in other people's programs as well. I will fix.
ps. a good solution in this case is just select the main window and hit escape.  The escape key will usually close the hidden dialog.

Second,
About this program needing its own section -- you are probably right.  I usually do create a section for each app of mine, but this one hasn't gotten much attention so i haven't bothered yet.  Same with my Automatic Screenshotter tool.

4753

Screenshot Captor / Re: feature request for auto-screenshot

« Last post by mouser on May 12, 2016, 08:04 AM »

only in the sense that yes i implemented it

https://www.donation...tomaticScreenshotter

4754

Living Room / Re: Good or bad password?

« Last post by mouser on May 11, 2016, 08:31 PM »

that's an excellent password (pass phrase).
theoretically would be improved if you mispelled a word or otherwise made it ungrammatical.

4755

LaunchBar Commander / Re: Sorting folder menus into subdirectories A-C, D-F, G-I, etc

« Last post by mouser on May 11, 2016, 11:27 AM »

I don't think such a feature exists, though it's not a terrible idea to add..

4756

LaunchBar Commander / Re: Sorting folder menus into subdirectories A-C, D-F, G-I, etc

« Last post by mouser on May 11, 2016, 11:15 AM »

You can tell LBC to sort and arrange the contents of a folder into SECTIONS by letter (though it's not subdirectories):

4757

Living Room / Re: silly humor - post 'em here! [warning some NSFW and adult content]

« Last post by mouser on May 10, 2016, 05:56 PM »

wow. that is amazingly cool.

4758

General Software Discussion / Re: advice on security setup for my elderly inlaws

« Last post by mouser on May 10, 2016, 06:00 AM »

one piece of advice given above is good -- make a full drive image of the computer when you get it set up the way you want it, and you keep a copy of that.  then if their set up gets messed up, you can restore it to how you had it in minutes.

4759

General Software Discussion / Re: advice on security setup for my elderly inlaws

« Last post by mouser on May 09, 2016, 09:33 AM »

what jibz said makes sense -- if they only need what's on a chromebook, it's a nice solution.

4760

Living Room / Re: snipping tool with image editor

« Last post by mouser on May 07, 2016, 10:27 AM »

My Screenshot Captor (link here) does have a little bit of a learning curve, but I do believe that after you spend just a little time with it and configure it to match your workflow, most users would find that it is trivially easy to do everything you need it to do, and in the most efficient manner.

Having said that, each to his own!

4761

Find And Run Robot / Re: Aliases in aliases

« Last post by mouser on May 07, 2016, 10:24 AM »

So I'm not sure if you invoke help differently from an F1 at that point,

Let me check into that -- I myself never use the F1 key to bring up help so it's not something I ever test.

4762

Find And Run Robot / Re: Aliases in aliases

« Last post by mouser on May 07, 2016, 10:23 AM »

I can see how that info about using | to prefix description is misleading -- I'll try to improve it.

As you figured out, the format if you want to add an optional description for an alias is:
prefix string here | commandline here

4763

Living Room / Re: Custom dice for board games, etc.

« Last post by mouser on May 07, 2016, 09:18 AM »

which IMO means it is more likely to peel away

yep.

4764

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 06, 2016, 08:15 PM »

well now let me ask a different question, is there ANY magnification above 100% with two monitors where a workspace capture is correct?

4765

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 06, 2016, 07:33 PM »

Ok so at least we are making progress on identifying the nature of the problem -- and it's not a problem with selected region capturing per se, and is instead a more general problem.

Very useful seeing those screenshots.

Now if I make impose a bit more --

I think you addressed this earlier, but is there a scenario where having the two screens at the SAME magnification still has a problem?  One subtlety about testing this is that it may be that SC has to be restarted after making magnification changes in order to not cause spurious problems.

And lastly, can you tell me if for example the 125+150 case above, if you do single-screen (monitor) captures, are the individual monitor captures also incomplete?

4766

Clipboard Help+Spell / Re: Filter box seizes focus...

« Last post by mouser on May 06, 2016, 04:15 PM »

Let me add an option to disable to auto-focus on filter box and see if that helps.

4767

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 06, 2016, 04:09 PM »

Following up -- it now appears i may have misunderstood a fundamental issue related to this problem.

I've been operating under the assumption that the other capture modes (capture screen, workspace) worked fine and it was just selected region that was broken.

But now from some discussion it appears that assumption may not be true.

Jesper can you go to a configuration where selected region captures give bad zoomed result, and then just try taking a normal Capture Screen capture on each monitor and post the results?

4768

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 06, 2016, 03:48 PM »

jesper, when you get a chance, im particularly interested in the normal CAPTURE ENTIRE WORKSPACE results in the two scenarios where selected region works vs when it doesn't.

contrary to my previous thinking that this capture-entire workspace always worked fine in all cases, on another user's test, we found big blank white areas on left and right of monitors indicating that something is wrong even with the capture entire workspace in this scenario.

4769

Finished Programs / Re: IDEA: Mouse Squeaker

« Last post by mouser on May 05, 2016, 12:09 PM »

in the email with your license keys each time you donate is a link to click to deposit the donation into your account and upgrade your account.
email me if you can't get it to work or can't find your email ([email protected])

4770

Finished Programs / Re: IDEA: Mouse Squeaker

« Last post by mouser on May 05, 2016, 11:54 AM »

Skwire does it again !

I know I might sound like a broken record but let me take another opportunity to remind folks that if you want to encourage people like skwire and the idea of coders solving requests like this, please do send a few bucks to the coder (skwire in this case) by clicking the gold $ coin under their name to the left.

4771

Screenshot Captor / Re: Able to set defaults for Add Border > Border Effect, Splice Style (Ragged Edge)?

« Last post by mouser on May 05, 2016, 08:30 AM »

I'd be curious to hear what tools/features in snagit that you are missing in SC (maybe in a personal message, email [email protected], or a separate thread).

4772

Screenshot Captor / Re: Able to set defaults for Add Border > Border Effect, Splice Style (Ragged Edge)?

« Last post by mouser on May 04, 2016, 09:36 PM »

Hi Alex.

I should probably save the last settings so they are remembered. Added to my todo list.

4773

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 04, 2016, 08:06 PM »

Can I ask a couple of quick questions, FOR THE SCENARIO WHERE THE SELECTION REGION CAUSES A PROBLEM:

1. in the config where selected region has a problem, can i confirm that the "capture entire workspace" capture works as expected, and captures entire workspace?
2. again in config where selected region has a problem, if you nevertheless trigger a selected region capture, and try to select the entire visible (zoomed) workspace, from top left to bottom right, what does the resulting image look like?

It would be great if you could attach 2 images, one with the entire workspace captured via "capture entire workspace" capture, and another using selected region and trying to select a region of maximum size from upper left to lower right.

4774

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 04, 2016, 06:55 PM »

I do very much appreciate all the testing!
Since we are still missing a truly simple explanation, i think the next step is for me to make a test version that creates the overlay and then draws on it to show where it THINKS each monitor is and what it's dimensions are.
I think this will let us see more clearly what is going on.

4775

Screenshot Captor / Re: Cannot capture region using Surface Pro4, dual monitor - extra zooming

« Last post by mouser on May 04, 2016, 02:19 PM »

Could it have something to do with the ALIGNMENT of the monitors?

It might help to understand how SC does the selected region capture -- it basically takes a preliminary screenshot of the entire workspace, and then OVERLAYS it on top of all screens so that it can draw on top of it (that's why everything "freezes" on your screens while you do a selected region capture).

Is it possible that windows is MOVING that giant overlay window somehow..