Recent Posts

2101

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 19, 2018, 10:59 AM »

I haven't made too many mistakes so far, but the doors have been a predictable struggle.
One problem was of my own making in the design stage.  I should have known not to try to put a double door where two doors close and meet in the middle.  Inset doors are hard enough, but having two doors meet with no vertical divider between them makes alignment even more difficult.  The eyes notice a misalignment here more than anywhere i think.  Plus it looks a little odd.  So after failing to get my doors to align sufficiently well, and cutting them too narrow, I decided to back up and put a vertical rail divider between them.  Makes accessing the contents slightly less convenient but I think it will look better...

Now I have to pick out some pulls for the drawers.. I have been using these T-bar pulls in other builds and I like them, so I'll probably go with them for the drawers and doors:

2102

Living Room / Re: Simone Giertz, Building bad robots, making videos, and coping with a brain tumor

« Last post by mouser on July 19, 2018, 10:56 AM »

What I meant is that many of us fight a voice in the back of our head that cautions us against showing vulnerability -- a voice that tells us not to show our weaknesses, and not to share our creations for fear they will be ridiculed or that they don't live up to expectations.  I think people like Simone are reminders that a far healthier way to live is not to let these voices stop you from putting yourself and your work out there, with a healthy dose of not taking yourself too seriously, and enjoy making a real connection with others.  People will appreciate your willingness to be vulnerable, and your projects have value even when they aren't perfect.

2103

Living Room / Re: Simone Giertz, Building bad robots, making videos, and coping with a brain tumor

« Last post by mouser on July 18, 2018, 05:12 PM »

The big take home message I get from Simone Giertz (her work and her recent shared struggle) is: Put yourself out there.

2104

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 17, 2018, 12:56 PM »

Here it is upright so you can see exactly where it will be and how much space it will occupy.

2105

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 17, 2018, 11:05 AM »

In the carcass?

Nope, keep looking.

2106

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 17, 2018, 03:26 AM »

As for the #24, only those who are familiar with the post of Cranioscopical's wife's paintings will be able to find that one...

2107

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 17, 2018, 03:25 AM »

That poster was my father's -- let's see who can tell us what it refers to.

2108

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 17, 2018, 02:50 AM »

 

Back will go on last.

ps.
Play the game: See if you can find #24 and my roomate.

2109

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 16, 2018, 06:38 PM »

Here it is so far after 5 days of solid work:


I never said I was fast

Dimensions are 8ft long by about 30 inches tall.


Note that those aren't the real feet, they are temporary feet so I can stand it up and work with it before i put final real feet on at the end.

2110

Screenshot Captor / Re: Menu bar stuck on right, not top

« Last post by mouser on July 16, 2018, 12:19 PM »

 

2111

Screenshot Captor / Re: Menu bar stuck on right, not top

« Last post by mouser on July 16, 2018, 11:45 AM »

You should be able to drag a blank part of it back to the top.
If you can't do that, you can exit and edit the ScreenshotCaptor.ini file and delete a line that should restore it -- i'll tell you how to do that if you can't get the drag to work.

2112

General Software Discussion / Re: Where has Clipmate Support Gone?

« Last post by mouser on July 16, 2018, 09:18 AM »

Nothing wrong with sticking with Windows 7 until time for a new computer.

2113

Living Room / Re: Movies you've seen lately

« Last post by mouser on July 16, 2018, 08:48 AM »

Gone Baby Gone -- seen it 5 or 6 times, one of my favorites.
https://www.imdb.com/title/tt0452623/

I cannot get enough of watching the boston neighborhood characters in this one.

Ironically, the movie was DIRECTED by Ben Afflect, and stars his brother Casey Affleck.  As an actor I am not a fan of Ben Affleck, but this is a sublimely directed movie -- Ben should stop acting and just stick to directing his brother.

2114

Living Room / Re: Animal Friends thread

« Last post by mouser on July 15, 2018, 02:33 PM »

Cat and bunny are best friends:

2115

Multi Photo Quotes / Re: Problem with showing multiple images on 1 monitor

« Last post by mouser on July 15, 2018, 12:20 PM »

Glad it's working for you.
I wonder if I added that option more recently and set it enabled by default..
Either way I should probably disable it when only a single monitor is found, as it is hard to see why anyone would want that option when they only have one monitor.  It can be fun when you have multiple monitors as it will always show one monitor full screen image.

2116

Multi Photo Quotes / Re: Problem with showing multiple images on 1 monitor

« Last post by mouser on July 15, 2018, 06:15 AM »

Try unchecking the "at least one image should be full screen" option.
That can be a nice option if you have multiple monitors but not if you have only one.

2117

ProcessTamer / Re: Setting process priority not working with Windows 10?

« Last post by mouser on July 14, 2018, 10:51 PM »

That's why I am so desparately looking for a tool which sets acemd.exe priority to "normal" for the whole time it's running.

I will add an option to PT to make it constantly force priority even if the app changes it, just hang in for a couple of days until I post an update

2118

ProcessTamer / Re: Setting process priority not working with Windows 10?

« Last post by mouser on July 14, 2018, 02:51 PM »

I think I am suggesting the acemd DOES change it's priority to below normal.  Apps don't start at that priority as far as i know, so it HAS to be that something is setting it low, and I dont think it's PT, so I'm guessing it's the app itself or the process that launched it.

2119

Multi Photo Quotes / Re: Problem with showing multiple images on 1 monitor

« Last post by mouser on July 14, 2018, 11:20 AM »

It's nice to hear someone uses the program besides me! I wish more people would let me know when they use some of my less popular apps, as sometimes I feel like no one does..

2120

Multi Photo Quotes / Re: Problem with showing multiple images on 1 monitor

« Last post by mouser on July 14, 2018, 11:12 AM »

Can you post a screenshot of these two tabs of your options:  Image Cells, Monitor Options

2121

General Software Discussion / Re: link for Mobysaurus thesaurus

« Last post by mouser on July 13, 2018, 04:15 PM »

This is an offline thesaurus?

Yes.  It was written by Anderson (Wordzilla) who used to hang out here a lot but not recently, so it's not an actively developed program, but it's still a pretty wonderous tool.

2122

General Software Discussion / Re: link for Mobysaurus thesaurus

« Last post by mouser on July 13, 2018, 03:00 PM »

rgdot's link is the official one.
Note that the vista x64 dll download on that page may also be needed on windows 10.

2123

General Software Discussion / Re: Software for planning wood bookcases/cabinets/tables etc?

« Last post by mouser on July 13, 2018, 12:14 PM »

I have begun the latest project, hope to have some finished photos in a week or so.

2124

Automatic Screenshotter / Re: Automatic Screenshotter v1.13.01 beta - July 29, 2019

« Last post by mouser on July 13, 2018, 05:30 AM »

Pushed beta to official.

2125

General Software Discussion / Re: Undocking MousersMediaBrowser??

« Last post by mouser on July 13, 2018, 05:25 AM »

Im trying out the automatic screenshotter and to be frank its fantastic

Oh I see you are using the Mousers Media Browser that comes with Automatic Screenshotter.

I think I already updated that one, but I can't remember if I released the latest Automatic Screenshotter as a beta or official..

Seems I released it as a beta, so I will push it to official now.

So you do NOT want to install the standalone Mousers Media Browser, but go grab the latest Automatic Screenshotter that I just uploaded -- then your Mousers Media Browser that is included should be fixed:
https://www.donation...omatic-screenshotter

Let me know if it's fixed!

ps.
I'm glad to hear that Automatic Screenshotter is proving useful to you.