Recent Posts

176

Post New Requests Here / Re: Does any folder in tree have more than one file in it?

« Last post by nkormanik on February 28, 2019, 11:48 PM »

@c.gingerich  Sill the same problem.  See snap of Garth Brooks above.

As an experiment I created a large folder hierarchy/tree structure with NO TWO FILES in any single folder.  mtof.exe flags folders even in this case, if more than one file exists in the mini-sub-hierarchy.

The objective is:  ONLY CALL 911 IF YOU SPOT TWO (OR MORE) BIRDS SITTING **TOGETHER** ON THE SAME SINGLE BRANCH.

Maybe it can't be done.

mtof.exe, though, is still a pretty neat little gem that I do appreciate.

177

Post New Requests Here / Re: Does any folder in tree have more than one file in it?

« Last post by nkormanik on February 26, 2019, 07:02 PM »

I had to modify my post above, to get the images right.  See if that helps to explain.

Using an actual tree analogy, only ONE BIRD is allowed to rest on any ONE BRANCH.  If TWO BIRDS are resting together on any single branch, must call 911.  (Police state, ya know.)

178

Post New Requests Here / Re: Does any folder in tree have more than one file in it?

« Last post by nkormanik on February 26, 2019, 06:50 PM »

My bad.  Not sure how to word it.  Top-level, as opposed to out in a branch?

Please see images:



In the case of Garth, there are two files nested.  Only one in any particular folder.



In the case of Wende, there are also two files nested.  But they reside in one single folder.

mtof.exe treats both of these scenarios the same.

It's the Wende case I want to flag.

179

Post New Requests Here / Re: Does any folder in tree have more than one file in it?

« Last post by nkormanik on February 25, 2019, 07:55 PM »

c.gingerich, beautiful work.  Close, but not quite.  mtof.exe is a keeper as is.  But the program requested must make a distinction between "files" and "folders."

mtof.exe presently groups the two together.

Does any folder have more than a single "file" within it?

Perhaps Windows doesn't allow for the distinction.

By the way, I tried again with TreeSize, and left it running overnight.  Still was not able to show a refreshed window with results by morning.  Just sat there.  Duh.  And this the Cadillac of such processing.

180

Post New Requests Here / Does any folder in tree have more than one file in it?

« Last post by nkormanik on February 25, 2019, 07:06 AM »

Given a large directory tree full of folders, maybe thousands, each and every folder is ONLY supposed to have one single file within it.

If there is any folder with more than a single file within it, I need to take a look at what the additional file(s) is/are.

The task of following each and every branch, and opening every folder to have a peek is enormously daunting, really time consuming.

Instead, ideally, software can go throughout and do the checking.

If more than one file is in a single folder, create a link to that folder, to form a list of links.

After the process, one can click on a link to automatically open said folder in explorer.

An additional option might be to show the number of files found.  But not so necessary as simply providing the link to the folder.

Any programming help from you wizards will be greatly appreciated.

As far as existing solutions out there, TreeSize sort of appears helpful.  However, two issues with TreeSize:  1. It chokes before even showing a list of folders.  2. There is no way of telling it to ONLY show folders with MORE THAN ONE file within it; it shows ALL folders.

Thoughts and suggestions much appreciated.

Nicholas Kormanik

181

Post New Requests Here / Re: Delete All Text In File Until Particular String

« Last post by nkormanik on February 14, 2019, 06:48 PM »

Thanks Ath.  Sed it is, then.

182

Post New Requests Here / Delete All Text In File Until Particular String

« Last post by nkormanik on February 13, 2019, 04:18 AM »

Wondering how one might delete all text up until finding a particular text string.

Suppose the text string is “WXYZ”.

And suppose there are around 100 lines above the “WXYZ” line.

Too, suppose we have 1000 files to do this to.

Any suggestions appreciated.

Nicholas Kormanik

183

Finished Programs / Re: SOLVED: Explorer Context Menu to Move Selected Items to Specific Folders

« Last post by nkormanik on January 14, 2019, 01:28 AM »

Sorryformyen, great job!  A lot of work you did.  Thanks for sharing.

184

General Software Discussion / Re: Disabled Services in Windows 10

« Last post by nkormanik on January 10, 2019, 04:51 PM »

Thanks, wraith808.  I disabled it because of the incessant, never-ending writing to logs.  Thought it could be hurting performance in ways.

185

General Software Discussion / Re: Disabled Services in Windows 10

« Last post by nkormanik on January 10, 2019, 02:53 AM »

Yes, 4wd, excellent lead for those that don't know about Black Viper.

That's what I started with.  You betcha.  But I still cut back a few.  Wondering if I trimmed anything I shouldn't have.

Hate unneeded, unwanted stuff running in the background.  If necessary, okay.  If not, seems good to disable.

It's so hard to know for sure which is which.

186

General Software Discussion / Disabled Services in Windows 10

« Last post by nkormanik on January 09, 2019, 12:48 AM »

In trying to keep my system running lean, I have disabled the following Windows 10 system services.  If you feel any of these are a mistake -- in terms of performance or stability -- please post your thoughts:

Service Name	Service Display Name
AJRouter	AllJoyn Router Service
AppMgmt	Application Management
AppVClient	Microsoft App-V Client
AppXSvc	AppX Deployment Service (AppXSVC)
BthAvctpSvc	AVCTP service
CDPUserSvc_4039d7	Connected Devices Platform User Service_4039d7
CertPropSvc	Certificate Propagation
CscService	CscService
EventLog	Windows Event Log
Fax	Fax
fhsvc	File History Service
FrameServer	Windows Camera Frame Server
HvHost	HV Host Service
icssvc	Windows Mobile Hotspot Service
iphlpsvc	IP Helper
IpxlatCfgSvc	IP Translation Configuration Service
irmon	Infrared monitor service
lfsvc	Geolocation Service
MapsBroker	Downloaded Maps Manager
MSiSCSI	Microsoft iSCSI Initiator Service
NaturalAuthentication	Natural Authentication
NcdAutoSetup	Network Connected Devices Auto-Setup
Netlogon	Netlogon
NetTcpPortSharing	Net.Tcp Port Sharing Service
PcaSvc	Program Compatibility Assistant Service
PeerDistSvc	BranchCache
PhoneSvc	Phone Service
RemoteAccess	Routing and Remote Access
RemoteRegistry	Remote Registry
RetailDemo	Retail Demo Service
RpcLocator	Remote Procedure Call (RPC) Locator
SCardSvr	Smart Card
ScDeviceEnum	Smart Card Device Enumeration Service
SCPolicySvc	Smart Card Removal Policy
SEMgrSvc	Payments and NFC/SE Manager
SensorDataService	Sensor Data Service
SensorService	Sensor Service
SensrSvc	Sensor Monitoring Service
SessionEnv	Remote Desktop Configuration
SharedAccess	Internet Connection Sharing (ICS)
ShellHWDetection	Shell Hardware Detection
shpamsvc	Shared PC Account Manager
SmsRouter	Microsoft Windows SMS Router Service.
SNMPTRAP	SNMPTRAP
TabletInputService	Touch Keyboard and Handwriting Panel Service
TermService	TermService
Themes	Themes
TrkWks	TrkWks
tzautoupdate	Auto Time Zone Updater
UevAgentService	User Experience Virtualization Service
UmRdpService	Remote Desktop Services UserMode Port Redirecto
vmicguestinterface	Hyper-V Guest Service Interface
vmicheartbeat	Hyper-V Heartbeat Service
vmickvpexchange	Hyper-V Data Exchange Service
vmicrdv	Hyper-V Remote Desktop Virtualization Service
vmicshutdown	Hyper-V Guest Shutdown Service
vmictimesync	Hyper-V Time Synchronization Service
vmicvmsession	Hyper-V PowerShell Direct Service
vmicvss	Hyper-V Volume Shadow Copy Requestor
wcncsvc	Windows Connect Now - Config Registrar
WebClient	WebClient
WerSvc	Windows Error Reporting Service
WinRM	Windows Remote Management (WS-Management)
wisvc	Windows Insider Service
wlidsvc	Microsoft Account Sign-in Assistant
WMPNetworkSvc	WMPNetworkSvc
workfolderssvc	Work Folders
WpcMonSvc	Parental Controls
WSearch	WSearch
WwanSvc	WWAN AutoConfig
XblAuthManager	Xbox Live Auth Manager
XblGameSave	Xbox Live Game Save
XboxGipSvc	XboxGipSvc
XboxNetApiSvc	Xbox Live Networking Service

187

Finished Programs / Re: SOLVED: Explorer Context Menu to Move Selected Items to Specific Folders

« Last post by nkormanik on January 07, 2019, 02:25 AM »

What!?

That easy??

188

Finished Programs / Re: SOLVED: Explorer Context Menu to Move Selected Items to Specific Folders

« Last post by nkormanik on January 06, 2019, 06:30 PM »

Sorryformyen, if you have found, or created, a .reg file with the MoveTo ability, please share.  Hugely important function.

MoveTo ability, meaning we can define the specific folders WHERE to move things to beforehand, ideally in a context menu that can appear via right-clicking on in Explorer.

I use FileMenu Tools for that purpose all the time, every day.  Would be great if there were a free way to do it, though, for others out there desiring it.

[attachthumb=#1]

189

Post New Requests Here / Re: How old is this file?

« Last post by nkormanik on December 30, 2018, 07:46 PM »

4wd, wow, amazing.  You nailed it.  Terrific job.

Hope this gem helps others out there.

Skwire, mission accomplished.

Happy New Year to all.

190

Post New Requests Here / Re: How old is this file?

« Last post by nkormanik on December 29, 2018, 05:23 AM »

The files are freshly created, less than 38 hours old, so far.  Creation Date and Modified Date appear to be the same.  Either one will do.

I've been searching on the Internet and no one out there seems to have come up with a solution, though it seems so easy -- Current Time minus (say) Creation Date.

No big deal.  Just wondered if someone here could whip it out.

191

Post New Requests Here / How old is this file?

« Last post by nkormanik on December 28, 2018, 06:26 PM »

Looking for a little snack program that does the following:

-- Place shortcut to it in SendTo list.

-- Send a file to it.

-- Up pops window saying how old the file is.

-- Days.  Hours.  Minutes.

Any help or thoughts appreciated!

Nicholas Kormanik

192

Post New Requests Here / Re: In some folder other than desktop, freeze icon placement

« Last post by nkormanik on December 05, 2018, 12:14 AM »

There are some flies in the ointment, at least, that I'm aware of:

In the above scenario Windows (10) expects the Desktop folder to be named "Desktop."  Not, for instance, Desktop#2.

So, Windows goes ahead and changes the name "Desktop#2" to "Desktop".

This even though there already is a "Desktop" -- your original one.  Which you certainly do not want over-written, or altered in any way.

Then it appears you have two "Desktop" folders.  Same name.  Side-by-side.  Go figure.

Additionally, each of the new Desktops will be initially populated with various icons of programs which, I'm assuming, are for "All Users," as opposed to just you.  One has to then delete these icons.  And such deletion could have some unintended consequences.

Frankly it's really not that big of a deal rebooting to get to a new clean desktop, when real estate is desperately needed.  By this I mean, not enough open space on our single Desktop, to strategically place new stuff.

As an analogy, the intent is sort of like having some project mapped out on a physical white board, with dry erase markers markings, sticky Post-It notes, lines, etc., all over.  Nice to have a second or third white board to move to when not ready to erase the first.

Oh, and, of course, you absolutely must be able to maintain the exact arrangement and order.  That's sort of another story (i.e., DesktopOK, or equivalent).

I find it stupefying that Windows doesn't already have this feature, multiple plain old desktops.  Like, as many as you want.  With ability to save icon positions, folders, stuff, independently for each one.

And, what the heck while I'm at it, maybe even some larger labels that can be moved around.

Dream on....

193

Post New Requests Here / Re: In some folder other than desktop, freeze icon placement

« Last post by nkormanik on December 04, 2018, 06:10 PM »

The key was/is to find out where in the registry Desktop location is stored.

Seems easy enough, huh.

Unfortunately, Windows wants that information in hex.

So, here are my four desktops, that I switch among.  I created four reg files, to double click on, when I want to use any particular one of the desktops.  (As said earlier, the actual folders of these desktops are side by side where everyone else's desktops are, c:\users\username\...):

Desktop#0 (original desktop, populated with tons of icons, way too many...)

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders]
"Desktop"=hex(2):43,00,3a,00,5c,00,55,00,73,00,65,00,72,00,73,00,5c,00,4e,00,\
  69,00,63,00,68,00,6f,00,6c,00,61,00,73,00,5c,00,44,00,65,00,73,00,6b,00,74,\
  00,6f,00,70,00,00,00

Desktop#1

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders]
"Desktop"=hex(2):43,00,3a,00,5c,00,55,00,73,00,65,00,72,00,73,00,5c,00,4e,00,\
  69,00,63,00,68,00,6f,00,6c,00,61,00,73,00,5c,00,44,00,65,00,73,00,6b,00,74,\
  00,6f,00,70,00,23,00,31,00,00,00

Desktop#2

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders]
"Desktop"=hex(2):43,00,3a,00,5c,00,55,00,73,00,65,00,72,00,73,00,5c,00,4e,00,\
  69,00,63,00,68,00,6f,00,6c,00,61,00,73,00,5c,00,44,00,65,00,73,00,6b,00,74,\
  00,6f,00,70,00,23,00,32,00,00,00

Desktop#3

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders]
"Desktop"=hex(2):43,00,3a,00,5c,00,55,00,73,00,65,00,72,00,73,00,5c,00,4e,00,\
  69,00,63,00,68,00,6f,00,6c,00,61,00,73,00,5c,00,44,00,65,00,73,00,6b,00,74,\
  00,6f,00,70,00,23,00,33,00,00,00

194

General Software Discussion / Re: "File Size" Not Increasing As It Should Be

« Last post by nkormanik on December 04, 2018, 05:38 PM »

Thank you all for sharing your wise, experienced insights.  Terrific resource here.

Nirsoft's FolderChangesView seems the best one can do for now, all things considered.

In that program getting 'File Properties' on parent folder additionally updates the current file sizes for all child files.  That eliminates the need to get individual file properties.

The whole purpose here was/is to merely make sure the program process is indeed chugging along as it should be, as the program itself doesn't let one know directly.

195

Post New Requests Here / Re: In some folder other than desktop, freeze icon placement

« Last post by nkormanik on December 04, 2018, 12:37 AM »

I ended up creating additional desktops in my c:\Users\Nicholas folder.  Along with the usual Desktop folder.

So, I have there:

Desktop#0
Desktop#1
Desktop#2
Desktop#3

Then I have to change in the registry which desktop I want to use.  Log out, and back in.

The additional desktops are blank slates.  Lots of new real estate.

Skwire, you can close this topic, I guess.

196

General Software Discussion / Re: "File Size" Not Increasing As It Should Be

« Last post by nkormanik on December 04, 2018, 12:21 AM »

Nirsoft FolderChangesView seems the best option so far.

However, even this doesn't show the actual file size.

Here is an email I just wrote to Nirsoft:

Enhancement Request -- FolderChangesView

Please incorporate a ‘button’ or ‘menu offering’ to really refresh all the present files shown.

For some reason the existing refresh does not really update file sizes, at least not when files are still being written to.

A process I have running keeps adding to a particular file.  Only way to see the increased real file size is to bring up ‘File Properties,’ one individual file at a time.

Far, far better to have a means to refresh all files shown, really refreshing them, showing true file sizes.

Thanks!

Nicholas Kormanik

197

General Software Discussion / Re: "File Size" Not Increasing As It Should Be

« Last post by nkormanik on December 02, 2018, 11:36 PM »

As 4wd points out, yes, context menu, Properties, does seem to do the trick of updating the filesize.

Other files in the folder don't get updated, I don't think.  Therefore, one would have to right-click on each, and do the Properties route.

198

General Software Discussion / Re: "File Size" Not Increasing As It Should Be

« Last post by nkormanik on December 02, 2018, 08:29 PM »

Perhaps best to move to more relevant section, Skwire.

Solution to issue, my hunch is, a small alternative to Explorer, that can dig in to the actual size, and has a refresh button.  Periodically press refresh to see updated sizes of files in particular folder.

Not sure that such program exists.

199

General Software Discussion / "File Size" Not Increasing As It Should Be

« Last post by nkormanik on December 02, 2018, 07:01 PM »

A lot of people are complaining about this out there, I see.  Just wondering what you folks have to say on the issue.

Given:  I have a 'process' executing.  And an Explorer window open, to monitor a folder that is supposed to be 'populated' with the results of 'process.'  A file exists there which is supposed to grow in size.

Existing file: XXYY.xxyy
Existing file size: 0 bytes

I'm expecting said file to increase.  12kb.  130kb.  256kb.  etc.

After an hour the file still remains at 0 bytes.

That is, in Explorer.  The little Explorer window I have open to watch it.

Yet, the actual fact of the matter is, the file HAS been growing.  Is now growing.  Is around 5 megabytes in size.  And growing still.

Yet Explorer continues to show the file as 0 bytes in size.

So..., out there in cyberland, various solutions to this issue have been proposed.

I'm wondering what your take is.

Thanks!

Nicholas Kormanik

200

Post New Requests Here / Re: In some folder other than desktop, freeze icon placement

« Last post by nkormanik on November 01, 2018, 02:38 PM »

Nice find, wraith808.  I'll try it out and see how it compares.

Fences, by the way, offered some benefits, but had shortfalls.  Not exactly what I was asking for.