Recent Posts

1601

General Software Discussion / Re: Taskbar and windows 8.1

« Last post by Contro on July 14, 2015, 03:08 PM »

I can't understand this :
"
How it works: This script operates on the active window. Hold down the configured modifier key (default: xbutton1, the "back" button on many mice) and click the left mouse button. While still holding both the left mouse button and the modifier down, move your mouse anywhere, and let go of the left mouse button, then the modifier. The point at which you clicked the left mouse button is the new top left coordinate of the active window, and the point you let go of the button is the new bottom right coordinate (or the other way around, depending on which way you moved the mouse relative to the window's previous coordinates). In short- you both resize and move the window in one swift action. Trace windows into empty spaces of your desktop! Have a lot of windows open across multiple monitors and you can't easily tell where the window you just alt tabbed to is? Trace it into view!"


My mouse have two buttons and a wheel
Pressing the wheel is assigned to othe task at the present moment....

1602

General Software Discussion / Re: Taskbar and windows 8.1

« Last post by Contro on July 14, 2015, 03:06 PM »

Set the taskbar to autohide?


EDIT// I see Miles has that covered already

-tomos (July 14, 2015, 02:10 PM)

I am obliged to use the option autohide, but i would like other answers

Best Regards
 

1603

General Software Discussion / Re: Taskbar and windows 8.1

« Last post by Contro on July 14, 2015, 03:05 PM »

Or without installing anything.. if you have Snap enabled press Winkey Left Arrow.  That should put the window inside the work area on the left half of the screen.  Then you can get the mouse to the corner.

Alternatively set Taskbar AutoHide to enabled(which I don't like either.  But it's an option.)

-MilesAhead (July 14, 2015, 01:48 PM)

During years I don't like to autohide the tasbar. But I am doing now.
The window in my monitor don't redimension with winkey+left arrow or similar
I have tried too window tracer, but really don't understand the script.
How can i do with the program.
Even i can't understand the video in the link

Best Regards

Any other tool ?

 

1604

General Software Discussion / Taskbar and windows 8.1

« Last post by Contro on July 14, 2015, 01:34 PM »

I am having problems with this :
I use a three heights taskbar usually and some apps windows appear in part under the taskbar doing difficult select options.

And the worst for me . I am not being able to diminished the size of that window.

What can i do to solve this ?

1605

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on June 11, 2015, 11:36 PM »

Finally i adopted this way :

Use pdf x-change or similar for the base document. Then insert dragging each by one in the base document.
The more confortable method for me is miniatures. I can drag and drop then any pdf additional document and insert it.

1606

General Software Discussion / Re: HomeFolder2

« Last post by Contro on June 11, 2015, 11:28 PM »

Good to see Miles.
Best Regards
 

1607

General Software Discussion / Re: Replace any string (even several lines) in multiple word files

« Last post by Contro on June 10, 2015, 10:28 AM »

Text Workbench

-rjbull (June 04, 2015, 05:28 PM)

Running to explore

1608

Post New Requests Here / Re: FolderUpdater

« Last post by Contro on June 10, 2015, 09:23 AM »

Really it's a sort of synchronization between predefined files and folders.

By example :
Y:\GAB\Projects\xxx.yy\COMPO\VARINTS

I vary Y:\GAB\Projects\127.08\COMPO\VARINTS\001.doc
So this is the last version of file i need in all the rest of folders according the pattern :
Y:\GAB\Projects\xxx.yy\COMPO\VARINTS

where xxx.yy are any characters in the path.

 

1609

General Software Discussion / Re: Replace any string (even several lines) in multiple word files

« Last post by Contro on June 03, 2015, 06:26 PM »

Beautiful nose Eric.

Good information to explorer.
Best Regards
 

1610

General Software Discussion / Replace any string (even several lines) in multiple word files

« Last post by Contro on June 02, 2015, 12:32 PM »

Replace any string (even several lines) in multiple word files ?

is it possible ?

replace a string in multiple word files ( files in a folder, files in several folders....)

I tried with Inforapid Search & Replace, but is not able with binary files.

Have you tried with success anyone else ?

Best Regards

Note : I think this feature is not in the official microsoft website
for the last versions. I am using word 2010

1611

General Software Discussion / Re: email client and a special feature

« Last post by Contro on May 30, 2015, 07:34 PM »

I find this :

http://www.markus-ba...bird/index.php#totop

But is for sending emails, not receiving
 

1612

General Software Discussion / Re: email client and a special feature

« Last post by Contro on May 30, 2015, 07:16 PM »

 

I have problems with the command line.

I am trying with a portable version of Thunderbird.

http://forums.mozill...p?f=39&t=2937893

Now I don't understand nothing ...
 

1613

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on May 21, 2015, 06:38 PM »

When go to install the Print Conductor seems a demo. So I don't install.
 

1614

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on May 21, 2015, 06:17 PM »

bullzip utility which is free for home use.  Has no whistle or bells but has always worked and so easy to use i find it hard to replace. Get at bullzip.com

-Contro (May 21, 2015, 05:54 PM)

I am not sure in the futures about the possibility to batch printing in the way Icecream PDF does 

1615

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on May 21, 2015, 05:54 PM »

Not sure if this applies or not but I use the bullzip utility which is free for home use.  Has no whistle or bells but has always worked and so easy to use i find it hard to replace. Get at bullzip.com.
be sure to look carefully for the community version' which is listed far down the page as some of the other options are free trials of their paid for product

-questorfla (May 20, 2015, 05:37 PM)

Trying best Regards.
 

1616

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on May 21, 2015, 05:54 PM »

Hi Contro! I recommend you Print Conductor (http://www.print-conductor.com/). I use this program to convert a document file in PDF-file and batch printing PDF-files. I will be happy if my advice helps you.

-Marktomson (May 20, 2015, 02:20 PM)

I'll try.
Best Regards

This program remember me the program gDocFusion .

 

1617

General Software Discussion / Re: Change the order of the phrases

« Last post by Contro on May 19, 2015, 05:41 PM »

Check out this NANY 2014 release: Text Inspection & Manipulation Utility https://www.donation...ex.php?topic=36544.0
It has a Scramble feature...

-Ath (May 19, 2015, 04:00 PM)

Running to the link   

1618

General Software Discussion / Re: Change the order of the phrases

« Last post by Contro on May 19, 2015, 05:37 PM »

https://www.donation...p?topic=37002.0;wap2

Ejem I think i will continue practising my memory.
I even continue with my mistake while I write down in january 2014 writing aleatory instead of random.
Fortunately i have the pc......

Best Regards

1619

General Software Discussion / Re: Change the order of the phrases

« Last post by Contro on May 19, 2015, 05:30 PM »

Thank Ath.
I was searching in "my memory" and find Skwire
I will put the links

1620

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on May 19, 2015, 05:15 PM »

Try printing it as one long PDF, and then upload to http://www.splitpdf.com/ —notice the "more" button to get multiple splits.

-ayryq (May 18, 2015, 04:54 PM)

A good solution.
Best Regards

1621

General Software Discussion / Re: Batch PDF printing

« Last post by Contro on May 19, 2015, 05:12 PM »

The program Icecream PDF Split and Merge does , but is not freeware

1622

General Software Discussion / Re: Change the order of the phrases

« Last post by Contro on May 19, 2015, 03:09 PM »

This is one possible way to do this :
Pasting random lines of a text file - AutoHotkey
www.autohotkey.com › ... › Ask for Help
Traducir esta página
18 feb. 2007 - 5 entradas - ?2 autores
Is there a way to open a text file, select a random line and put this line on the ... Alternatively, you could sort the file randomly with Sort, but that ...

1623

General Software Discussion / Re: Change the order of the phrases

« Last post by Contro on May 19, 2015, 02:52 PM »

I think perhaps in a txt file.
If a paragraph is in the same line is enough to change the orden of these lines.

Let me see.....

 

1624

General Software Discussion / Re: email client and a special feature

« Last post by Contro on May 19, 2015, 12:30 PM »

jajajajajajaja
About Microsoft Powershell
By the way :
My notes on my diary june 29, 2010 at 10:42 am
I am not interested in this language.
If I mess will be worst....

 

1625

General Software Discussion / Re: email client and a special feature

« Last post by Contro on May 19, 2015, 10:33 AM »

I have downloaded Idera.

Why ?  

Very simple. I am not obtaining answers in the forum to a series of questions. And is not a fault of the magnificency of the donarioncoder members...
It's simply that some questions requires personalyzed scripts that only matters my needs.

I am doing now that deeper prospection with iMacros.
Other times may be AutoHotkey. Just because DC is full of good programmers in that metalanguage.