Messages

3176

Finished Programs / SOLVED: Script to send email, but ....

« on: June 22, 2012, 01:13 PM »

Script to send email, but ....

Not with the default client indicated to the operating system (windows xp pro sp3)
Must be able to send with the client indicated in the script.
In my case is in :
Y:\PORTABLES\Navegadores . Internet . Correo\ThunderbirdPortable

Any other automation in the script is welcome :
1. Send to the last destination appear by default
2. The email sender, by default, the same last time.....

 

3177

Screenshot Captor / Re: Time Interval in Auto Capture Timer

« on: June 22, 2012, 12:07 PM »

Or create a screen-movie, using something like the free CamStudio

-Ath (June 22, 2012, 06:06 AM)

CamStudio I think don't have the pause button.
So I only can see the super-quick warning.
Something is interfering in my hotkey Control+K when I activate the capital lettters (excuse my english)
  When I activate to put the letters in the way (ABCDE...) my hotkey fails

Shift+Control+K ?¿??¿?¿

I usually assume the old format : Control+shift+K

I will investigate this hotkey

See...

Owww. In Firefox have strange effect. Open a singular window I have never seen before....

The additional problem is that when I deactivate the key of the ABCD... letters, the problem with the hotkey Control+K continues.

The hotkey is general. Assign with an old version of Phrase Express.
Version 4 I think.

When try Shift+Control+K in the screen that don't obey there is not interaction.

I need to see that damned screenshot.

 

3178

Screenshot Captor / Re: Time Interval in Auto Capture Timer

« on: June 22, 2012, 11:45 AM »

Ath is right -- if you need to capture huge numbers of images as fast interval, you might try a video capturing tool.

Having said that, I could see how fast I can make SC go if you want to test it.

-mouser (June 22, 2012, 10:34 AM)

Yessss
I don't need video without screenshot. Is the moment I have to analyze. I don't images with the pause button....

Can we test ?

 

3179

Screenshot Captor / Re: Time Interval in Auto Capture Timer

« on: June 22, 2012, 10:29 AM »

I did. It's unmarked.

ScreenShot Captor don't admit numbers less than 1 second.

I tried with an old version of TimeSnapper.

accept 0.01 seconds , but the result is nonsense.

and If I put 1 second in TimeSnapper only obtain 34 screenshots in a minute controlled with an external Ferrari chronometer.

I have to continue the search of the soft.

Best Regards

 

3180

Screenshot Captor / Re: Time Interval in Auto Capture Timer

« on: June 22, 2012, 09:14 AM »

Happen in less time. I don't capture.

I unmarked 4000 ms and rate(s) = 1

 

3181

Screenshot Captor / Re: Time Interval in Auto Capture Timer

« on: June 22, 2012, 09:08 AM »

Ejem. i will comment if 1 second was enough or more precision is needed.

3182

Screenshot Captor / Re: Time Interval in Auto Capture Timer

« on: June 22, 2012, 09:02 AM »

The interval period is set on the "Pre-Capture" Options tab.

-mouser (June 22, 2012, 06:01 AM)

Running 

3183

Screenshot Captor / Time Interval in Auto Capture Timer

« on: June 22, 2012, 05:56 AM »

Time Interval in Auto Capture Timer

I have a problem and want to detect in the screenshots the problem. But I need to take many screenshots in a short time.

Screenshot Captor have the option : Engage Auto Capture Timer (toggle)

Can i vary the the time interval to take automatically screenshots ?

I am not able to find in preferences.

Best Regards
 

3184

General Software Discussion / Re: Go Back

« on: June 21, 2012, 06:22 AM »

Ouwww Happen again after the cleaning operation.
I have put the log.zip in the manictime forum
Perhaps I have to reinstall the software. I don't now. Better wait. The manicTime seems a prepared forum.
 

3185

General Software Discussion / Re: Go Back

« on: June 21, 2012, 05:59 AM »

 
Uff I am here again. Four virus.
 

I will study the program. i will comment.

3186

General Software Discussion / Re: Go Back

« on: June 21, 2012, 03:42 AM »

I am full of viruses.....
Not for ManicTime.
I am repairing

3187

General Software Discussion / Re: Go Back

« on: June 21, 2012, 02:26 AM »

At the present moment ManicTime hangs often and I have put a post in the manicTime forum.

3188

General Software Discussion / Re: Go Back

« on: June 20, 2012, 05:33 PM »

huh?

-mouser (June 20, 2012, 03:11 PM)

I am going mad. I think I have seen a nose a few moments ago.

3189

General Software Discussion / Re: Go Back

« on: June 20, 2012, 05:23 PM »

I want to know where was I a time ago. Completely.

-Contro (June 20, 2012, 08:50 AM)

Oh, you need complete time-tracking and reporting. I'm using the free version of ManicTime for that. I was pointed over there by a post in this forum, some time ago, and I've kept it running since then.
Works like a charm, non-intrusive, just what I need when I ask myself: What was I doing "yesterday between 13:00 and 13:30", or "today, 10 minutes ago"

-Ath (June 20, 2012, 09:55 AM)

I'll try. I download a version of ManicTime in 2009 January. I have problems with framework 3.5 . I observed is not portable at all.
I repeat today with more confidence.

Best Regards.

I will comment if is what I am looking for.
 

3190

General Software Discussion / Re: Go Back

« on: June 20, 2012, 08:50 AM »

 

I want to know where was I a time ago. Completely.
If I was five minutes ago in a word document, in the page 6, go there.
if I was five minutes ago playing a music go there in the exact minute I was five minutes ago.
iF i was doing a critical or irrepetible task then show the moment before initiate the task. By example a security copy. I don't want position at the middle of the security copy and running.
Go back position in the past, but without giving possibility of really undoing or redoing in the middle of it. Is not Control+Z or Control+Y
Go back is contemplative.

 

3191

General Software Discussion / Re: Go Back

« on: June 19, 2012, 08:14 PM »

   Move the cursor, but don't remember the active window ten minutes ago ?

that's a very relative Go Back...
 

3192

General Software Discussion / Re: Go Back

« on: June 19, 2012, 07:26 PM »

Owww. it's a beginning.
Perhaps in the future we can select the time we want go back.
 

3193

General Software Discussion / Re: Go Back

« on: June 19, 2012, 07:14 PM »

try this - Recursor

nothing fancy, it records the mouse cursor position every 5 seconds

Hotkey (Win + Space) moves the cursor to wherever it was 10 minutes ago (If it's been running for less than 10 minutes it does nothing)

-Target (June 18, 2012, 10:13 PM)

trying . Win+space I have occupied with the application ReOpen.
It's the source file and can change the hotkey easily ?

Best regards

3194

Post New Requests Here / Re: Create an empty txt file in the active window

« on: June 18, 2012, 08:24 PM »

I have received help from dylan904

[Select]

#SingleInstance Force

#if winactive("ahk_class CabinetWClass")
{
  ^!z::
  WinGet, WinID, ID, A
  ControlGetText, DesPath, Edit1, ahk_id %WinID%
  Gui, Add, ListView, r10 NoSort gChoose vChosenName, File Name
  For A,B in {1:"File1.txt",2:"File2.txt",3:"File3.txt",4:"File4.txt",5:"File5.txt",6:"File6.txt",7:"File7.txt",8:"File8.txt",9:"File9.txt",10:"File10.txt"}
    LV_Add("",B)
  Gui, Show,, Choose File Name
  Return
 
  Choose:
  LV_GetText(ChosenName, A_EventInfo)
  Gui, Destroy
  FileAppend,, %DesPath%\%ChosenName%
  Sleep, 850
  While (ClipBoard != DesPath "\" ChosenName)
  {
    Send, % SubStr(ChosenName, 1, 1)
    Sleep, 15
    SendInput, ^c
    Sleep, 15
  }
  Return
}

Goes well. Rarely fails, but his author tells :
"To the extent of my knowledge, Windows Explorer is not very easy to manipulate.
But you may use something like this, you can use an .ini instead, but for now i just used a general list of file names to choose from (Control+Alt+z to activate)..."

 

Now I am considering the possibility of insert date/time in the name of the txt file.
I supposed I have to use a system memory variable and propose in the name of the txt file.
For me is enough to edit the ahk file.

 

3195

Post New Requests Here / Re: Create an empty txt file in the active window

« on: June 18, 2012, 01:43 PM »

Now I understand why in the script you propose the hotkey too.
I have a program to control the hotkeys that is resident. So I only need the code

1. Open a selection list
2. With the selected item create a txt file in the active window .

 

3196

Post New Requests Here / Re: Execute a launch menu with prior password protection

« on: June 17, 2012, 05:34 PM »

Worksssss Worksssss !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

3197

Post New Requests Here / Re: Execute a launch menu with prior password protection

« on: June 17, 2012, 05:24 PM »

Let's go.
 

Best Regards

3198

Post New Requests Here / Re: Create an empty txt file in the active window

« on: June 17, 2012, 04:16 PM »

NO.
I am thinking and thinking.
Now I need more.
I would like a hotkey not resident program to start a script able to present a list selection from the cursor with the alternatives names to the txt to create.
Always to do in the active window if exist. If not the script don't start.

 

so. It's a second contextual menu activated with the hotkey. A selection list. Once the selection is done the txt with the name of the selection is created.

Is it possible ?

 

3199

Post New Requests Here / Re: Create an empty txt file in the active window

« on: June 17, 2012, 03:08 PM »

This is what I have in AutoIt3. It suffers from the same foible that you have to make sure nothing on the desktop or in the folder is selected. (Also as I mentioned, it doesn't work in Computer and other special Shell Object folders, which may include the libraries.)

[Select]

#include <WinAPI.au3>

$hotkey = "^+{F10}"
If Not HotKeySet($hotkey, "_MakeNewTextFile") Then
MsgBox(0x1010,"MakeNewTextFile",$hotkey & " could not be assigned as Hotkey")
Exit
EndIf

While 1
Sleep(100)
WEnd

Func _MakeNewTextFile()
Local $handle = _WinAPI_GetForegroundWindow()
Local $className = _WinAPI_GetClassName($handle)
If $className = "Progman" Or $className = "WorkerW" Or $className = "ExploreWClass" Or $className = "CabinetWClass" Then
Send("{AppsKey}")
Sleep(10)
Send("w")
Sleep(10)
Send("t")
Sleep(10)
Send("instructions")
EndIf
EndFunc

-MilesAhead (June 16, 2012, 04:03 PM)

I'll try in autoit and comment

3200

Post New Requests Here / Re: Create an empty txt file in the active window

« on: June 17, 2012, 02:22 PM »

This already explains it better than I can in a few paragraphs:

http://windowsxp.mvp....org/shellnewadd.htm

If you just want an empty text file, you don't have to bother with the template.

-MilesAhead (June 17, 2012, 02:20 PM)

Thanks Miles. i haven't reach your script yet