; see: http://www.autohotkey.com/forum/viewtopic.php?t=11860 for orignal
; GDI File and Image Helper
/*
BinaryEncodingDecoding.ahk
Routines to encode and decode binary data to and from Ascii/Ansi data (source code).
// by Philippe Lhoste <PhiLho(a)GMX.net> http://Phi.Lho.free.fr
// File/Project history:
1.01.000 -- 2006/07/04 (PL) -- Finally, I put Pebwa in its own file, it has less generic use.
1.00.000 -- 2006/03/29 (PL) -- Creation, taking Bin2Hex and Hex2Bin
(and Bin2Pebwa & Pebwa2Bin) from DllCallStruct.
Bin2Hex & Hex2Bin derivated from Laszlo's code.
*/
/* Copyright notice: See the PhiLhoSoftLicence.txt file for details.
This file is distributed under the zlib/libpng license.
Copyright (c) 2006 Philippe Lhoste / PhiLhoSoft
*/
FormatHexNumber(_value, _digitNb)
{
local hex, intFormat
; Save original integer format
intFormat = %A_FormatInteger%
; For converting bytes to hex
SetFormat Integer, Hex
hex := _value + (1 << 4 * _digitNb)
StringRight hex, hex, _digitNb
; I prefer my hex numbers to be in upper case
StringUpper hex, hex
; Restore original integer format
SetFormat Integer, %intFormat%
Return hex
}
/*
// Convert raw bytes stored in a variable to a string of hexa digit pairs.
// Convert either byteNb bytes or, if null, the whole content of the variable.
//
// Return the number of converted bytes, or -1 if error (memory allocation)
*/
Bin2Hex(ByRef @hexString, ByRef @bin, _byteNb=0)
{
local dataSize, dataAddress, granted, hex
; Get size of data
dataSize := VarSetCapacity(@bin)
If (_byteNb < 1 or _byteNb > dataSize)
{
_byteNb := dataSize
}
dataAddress := &@bin
; Make enough room (faster)
granted := VarSetCapacity(@hexString, _byteNb * 2)
if (granted < _byteNb * 2)
{
; Cannot allocate enough memory
ErrorLevel = Mem=%granted%
Return -1
}
Loop %_byteNb%
{
; Get byte in hexa
hex := FormatHexNumber(*dataAddress, 2)
@hexString = %@hexString%%hex%
dataAddress++
; Next byte
}
Return _byteNb
}
/*
// Convert a string of hexa digit pairs to raw bytes stored in a variable.
// Convert either byteNb bytes or, if null, the whole content of the variable.
//
// Return the number of converted bytes, or -1 if error (memory allocation)
*/
Hex2Bin(ByRef @bin, _hex, _byteNb=0)
{
local dataSize, granted, dataAddress, x
; Get size of data
x := StrLen(_hex)
dataSize := x // 2
if (x = 0 or dataSize * 2 != x)
{
; Invalid string, empty or odd number of digits
ErrorLevel = Param
Return -1
}
If (_byteNb < 1 or _byteNb > dataSize)
{
_byteNb := dataSize
}
; Make enough room
granted := VarSetCapacity(@bin, _byteNb, 0)
if (granted < _byteNb)
{
; Cannot allocate enough memory
ErrorLevel = Mem=%granted%
Return -1
}
dataAddress := &@bin
Loop Parse, _hex
{
if (A_Index & 1 = 1)
; Odd
{
x := A_LoopField
; Odd digit
}
Else
{
; Concatenate previous x and even digit, converted to hex
x := "0x" . x . A_LoopField
; Store integer in memory
DllCall("RtlFillMemory"
, "UInt", dataAddress
, "UInt", 1
, "UChar", x)
dataAddress++
}
}
Return _byteNb
}
/*
DllCallStruct.ahk
Routines to read and write binary data to and from variables.
Helpers for DllCalls, handling of structures and such.
// by Philippe Lhoste <PhiLho(a)GMX.net> http://Phi.Lho.free.fr
// File/Project history:
1.04.000 -- 2006/03/29 (PL) -- Moved Bin2Hex and Hex2Bin from to BinaryEncodingDecoding.ahk.
Renamed/recoded SetUInt & GetUInt to SetNextUInt & GetNextUInt and
added SetNextByte and GetNextByte.
1.03.000 -- 2006/03/24 (PL) -- Added Pebwa2Hex & Hex2Pebwa, to encode and decode binary data
in an Ascii format, supposedly compact.
1.02.000 -- 2006/03/17 (PL) -- Added SetUInt & GetUInt, mostly for copy/paste of small examples.
Created FormatHexNumber and Improved DumpDWORDs (extended mode).
1.01.000 -- 2006/02/15 (PL) -- Moved Bin2Hex & Hex2Bin from BinReadWrite.
1.00.000 -- 2006/01/19 (PL) -- Creation with stock ExtractInteger & InsertInteger.
GetInteger & SetInteger derivated from the AHK's documentation.
*/
/* Copyright notice: See the PhiLhoSoftLicence.txt file for details.
This file is distributed under the zlib/libpng license.
Copyright (c) 2006 Philippe Lhoste / PhiLhoSoft
*/
;#Include BinaryEncodingDecoding.ahk
/*
// Write a UInt (DWORD, ULONG, etc.) after the previously written ones.
// Useful for structures made only of UInts (POINT, RECT, etc.).
//
// @struct: hold the buffer where to write the UInt
// _value: value to write
// _bReset: if true, set UInt at offset 0
*/
SetNextUInt(ByRef @struct, _value, _bReset=false)
{
local addr
static $offset
If (_bReset)
{
$offset := 0
}
addr := &@struct + $offset
$offset += 4
DllCall("RtlFillMemory", "UInt", addr, "UInt", 1, "UChar", (_value & 0x000000FF))
DllCall("RtlFillMemory", "UInt", addr + 1, "UInt", 1, "UChar", (_value & 0x0000FF00) >> 8)
DllCall("RtlFillMemory", "UInt", addr + 2, "UInt", 1, "UChar", (_value & 0x00FF0000) >> 16)
DllCall("RtlFillMemory", "UInt", addr + 3, "UInt", 1, "UChar", (_value & 0xFF000000) >> 24)
}
/*
// Read a UInt (DWORD, ULONG, etc.) after the previously read ones.
// Useful for structures made only of UInts (POINT, RECT, etc.).
//
// @struct: hold the buffer from which to extract the UInt.
// _bReset: if true, get UInt at offset 0. Needed when calling with another structure.
*/
GetNextUInt(ByRef @struct, _bReset=false)
{
local addr
static $offset
If (_bReset)
{
$offset := 0
}
addr := &@struct + $offset
$offset += 4
Return *addr + (*(addr + 1) << 8) + (*(addr + 2) << 16) + (*(addr + 3) << 24)
}
/*
// Write a byte after the previously written ones.
//
// @struct: hold the buffer where to write the byte
// _value: value to write
// _bReset: if true, set byte at offset 0
*/
SetNextByte(ByRef @struct, _value, _bReset=false)
{
local addr
static $offset
If (_bReset)
{
$offset := 0
}
addr := &@struct + $offset
$offset++
DllCall("RtlFillMemory", "UInt", addr, "UInt", 1, "UChar", _value)
}
/*
// Read a byte after the previously read ones.
//
// @struct: hold the buffer from which to extract the byte
// _bReset: if true, get byte at offset 0
*/
GetNextByte(ByRef @struct, _bReset=false)
{
local addr
static $offset
If (_bReset)
{
$offset := 0
}
addr := &@struct + $offset
$offset++
Return *addr
}
/*
// Get and return a numerical value from the given buffer (@source) at given
// offset (_offset, in bytes). By default get a UInt/DWORD/Long (4 bytes)
// but _size parameter can be set to another size (in bytes).
// If _bIsSigned is true, interpret the result as signed number.
*/
; @source is a string (buffer) whose memory area contains a raw/binary integer at _offset.
; The caller should pass true for _bIsSigned to interpret the result as signed vs. unsigned.
; _size is the size of @source's integer in bytes (e.g. 4 bytes for a DWORD or Int).
; @source must be ByRef to avoid corruption during the formal-to-actual copying process
; (since @source might contain valid data beyond its first binary zero).
GetInteger(ByRef @source, _offset = 0, _bIsSigned = false, _size = 4)
{
local result
Loop %_size% ; Build the integer by adding up its bytes.
{
result += *(&@source + _offset + A_Index-1) << 8*(A_Index-1)
}
If (!_bIsSigned OR _size > 4 OR result < 0x80000000)
Return result ; Signed vs. unsigned doesn't matter in these cases.
; Otherwise, convert the value (now known to be 32-bit & negative) to its signed counterpart:
return -(0xFFFFFFFF - result + 1)
}
/*
// Set a numerical value (_integer) in the given buffer (@dest) at given
// offset (_offset, in bytes). By default set a UInt/DWORD/Long (4 bytes)
// but _size parameter can be set to another size (in bytes).
*/
; The caller must ensure that @dest has sufficient capacity.
; To preserve any existing contents in @dest,
; only _size number of bytes starting at _offset are altered in it.
SetInteger(ByRef @dest, _integer, _offset = 0, _size = 4)
{
Loop %_size% ; Copy each byte in the integer into the structure as raw binary data.
{
DllCall("RtlFillMemory"
, "UInt", &@dest + _offset + A_Index-1
, "UInt", 1
, "UChar", (_integer >> 8*(A_Index-1)) & 0xFF)
}
}
; Some API functions require a WCHAR string.
GetUnicodeString(ByRef @unicodeString, _ansiString)
{
local len
len := StrLen(_ansiString)
VarSetCapacity(@unicodeString, len * 2 + 1, 0)
; http://msdn.microsoft.com/library/default.asp?url=/library/en-us/intl/unicode_17si.asp
DllCall("MultiByteToWideChar"
, "UInt", 0 ; CodePage: CP_ACP=0 (current Ansi), CP_UTF7=65000, CP_UTF8=65001
, "UInt", 0 ; dwFlags
, "Str", _ansiString ; LPSTR lpMultiByteStr
, "Int", len ; cbMultiByte: -1=null terminated
, "UInt", &@unicodeString ; LPCWSTR lpWideCharStr
, "Int", len) ; cchWideChar: 0 to get required size
}
; Some API functions return a WCHAR string.
GetAnsiStringFromUnicodePointer(_unicodeStringPt)
{
local len, ansiString
len := DllCall("lstrlenW", "UInt", _unicodeStringPt)
VarSetCapacity(ansiString, len, 0)
DllCall("WideCharToMultiByte"
, "UInt", 0 ; CodePage: CP_ACP=0 (current Ansi), CP_UTF7=65000, CP_UTF8=65001
, "UInt", 0 ; dwFlags
, "UInt", _unicodeStringPt ; LPCWSTR lpWideCharStr
, "Int", len ; cchWideChar: size in WCHAR values, -1=null terminated
, "Str", ansiString ; LPSTR lpMultiByteStr
, "Int", len ; cbMultiByte: 0 to get required size
, "UInt", 0 ; LPCSTR lpDefaultChar
, "UInt", 0) ; LPBOOL lpUsedDefaultChar
Return ansiString
}
/*
// Kept for backward compatibility (and convenience?).
*/
DumpDWORDs(ByRef @bin, _byteNb, _bExtended=false)
{
Return DumpDWORDsByAddr(&@bin, _byteNb, _bExtended)
}
/*
// For debugging, return formatted hex string separating DWORDs
// Idem to Bin2Hex, usable directly in a MsgBox...
// Extended mode: give offsets and Ascii dump.
*/
DumpDWORDsByAddr(_binAddr, _byteNb, _bExtended=false)
{
local dataSize, dataAddress, granted, line, dump, hex, ascii
local dumpWidth, offsetSize, resultSize
offsetSize = 4
; 4 hex digits (enough for most dumps)
dumpWidth = 32
; Make enough room (faster)
resultSize := _byteNb * 4
If _bExtended
{
dumpWidth = 16 ; Make room for offset and Ascii
resultSize += offsetSize + 8 + dumpWidth
}
granted := VarSetCapacity(dump, resultSize)
if (granted < resultSize)
{
; Cannot allocate enough memory
ErrorLevel = Mem=%granted%
Return -1
}
If _bExtended
{
offset = 0
line := FormatHexNumber(offset, offsetSize) ": "
}
Loop %_byteNb%
{
; Get byte in hexa
hex := FormatHexNumber(*_binAddr, 2)
If _bExtended
{
; Get byte in Ascii
If (*_binAddr >= 32)
; Not a control char
{
ascii := ascii Chr(*_binAddr)
}
Else
{
ascii := ascii "."
}
offset++
}
line := line hex A_Space
If (Mod(A_Index, dumpWidth) = 0)
{
; Max dumpWidth bytes per line
If (_bExtended)
{
; Show Ascii dump
line := line " - " ascii
ascii =
}
dump := dump line "`n"
line =
If (_bExtended && A_Index < _byteNb)
{
line := FormatHexNumber(offset, offsetSize) ": "
}
}
Else If (Mod(A_Index, 4) = 0)
{
; Separate bytes per groups of 4, for readability
line := line "| "
}
_binAddr++
; Next byte
}
If (Mod(_byteNb, dumpWidth) != 0)
{
If (_bExtended)
{
line := line " - " ascii
}
dump := dump line "`n"
}
Return dump
}
/*
GDIplusWrapper.ahk
Wrappers around some useful GDI+ functions.
// by Philippe Lhoste <PhiLho(a)GMX.net> http://Phi.Lho.free.fr
// File/Project history:
1.02.000 -- 2006/08/22 (PL) -- Added GDIplus_LoadBitmapFromClipboard.
1.01.000 -- 2006/08/21 (PL) -- Some fixes, support of more parameters.
1.00.000 -- 2006/08/18 (PL) -- Initial code.
*/
;#Include DllCallStruct.ahk
; GDI+ constants
; GpStatus enumeration
; http://msdn.microsoft.com/library/default.asp?url=/library/en-us/gdicpp/GDIPlus/GDIPlusreference/enumerations/status.asp
#GDIplusOK = 0
#GpStatus@0 = OK
#GpStatus@1 = GenericError
#GpStatus@2 = InvalidParameter
#GpStatus@3 = OutOfMemory
#GpStatus@4 = ObjectBusy
#GpStatus@5 = InsufficientBuffer
#GpStatus@6 = NotImplemented
#GpStatus@7 = Win32Error
#GpStatus@8 = WrongState
#GpStatus@9 = Aborted
#GpStatus@10 = FileNotFound
#GpStatus@11 = ValueOverflow
#GpStatus@12 = AccessDenied
#GpStatus@13 = UnknownImageFormat
#GpStatus@14 = FontFamilyNotFound
#GpStatus@15 = FontStyleNotFound
#GpStatus@16 = NotTrueTypeFont
#GpStatus@17 = UnsupportedGdiplusVersion
#GpStatus@18 = GdiplusNotInitialized
#GpStatus@19 = PropertyNotFound
#GpStatus@20 = PropertyNotSupported
#sizeOfCLSID = 16
; EncoderValueCompressionLZW, ...CCITT3, ...CCITT4, ...Rle, ...None for TIFF
#EncoderCompression = {E09D739D-CCD4-44EE-8EBA-3FBF8BE4FC58}
; 1, 4, 8, 24, 32 -- The image must be in the right format before saving
#EncoderColorDepth = {66087055-AD66-4C7C-9A18-38A2310B8337}
#EncoderScanMethod = {3A4E2661-3109-4E56-8536-42C156E7DCFA}
#EncoderVersion = {24D18C76-814A-41A4-BF53-1C219CCCF797}
#EncoderRenderMethod = {6D42C53A-229A-4825-8BB7-5C99E2B9A8B8}
; 0 to 100 (JPeg)
#EncoderQuality = {1D5BE4B5-FA4A-452D-9CDD-5DB35105E7EB}
#EncoderTransformation = {8D0EB2D1-A58E-4EA8-AA14-108074B7B6F9}
#EncoderLuminanceTable = {EDB33BCE-0266-4A77-B904-27216099E717}
#EncoderChrominanceTable = {F2E455DC-09B3-4316-8260-676ADA32481C}
; EncoderValueMultiFrame (TIFF)
#EncoderSaveFlag = {292266FC-AC40-47BF-8CFC-A85B89A655DE}
#FrameDimensionTime = {6AEDBD6D-3FB5-418A-83A6-7F45229DC872}
#FrameDimensionResolution = {84236F7B-3BD3-428F-8DAB-4EA1439CA315}
#FrameDimensionPage = {7462DC86-6180-4C7E-8E3F-EE7333A7A483}
#FormatIDImageInformation = {E5836CBE-5EEF-0F1D-ACDE-AE4C43B608CE}
#FormatIDJpegAppHeaders = {1C4AFDCD-6177-43CF-ABC7-5F51AF39EE85}
#CodecIImageBytes = {025D1823-6C7D-447B-BBDB-A3CBC3DFA2FC}
; http://msdn.microsoft.com/library/default.asp?url=/library/en-us/gdicpp/GDIPlus/usingGDIPlus/usingimageencodersanddecoders/determiningtheparameterssupportedbyanencoder/listingparametersandvaluesforallencoders.asp
; Specifies that the parameter is an 8-bit unsigned integer.
#EncoderParameterValueTypeByte = 1
; Specifies that the parameter is a null-terminated character string.
#EncoderParameterValueTypeASCII = 2
; Specifies that the parameter is a 16-bit unsigned integer.
#EncoderParameterValueTypeShort = 3
; Specifies that the parameter is a 32-bit unsigned integer.
#EncoderParameterValueTypeLong = 4
; Specifies that the parameter is an array of two, 32-bit unsigned integers.
; The pair of integers represents a fraction.
; The first integer in the pair is the numerator, and the second integer in the pair is the denominator.
#EncoderParameterValueTypeRational = 5
; Specifies that the parameter is an array of two, 32-bit unsigned integers.
; The pair of integers represents a range of numbers.
; The first integer is the smallest number in the range, and the second integer is the largest number in the range.
#EncoderParameterValueTypeLongRange = 6
; Specifies that the parameter is an array of bytes that can hold values of any type.
#EncoderParameterValueTypeUndefined = 7
; Specifies that the parameter is an array of four, 32-bit unsigned integers.
; The first two integers represent one fraction, and the second two integers represent a second fraction.
; The two fractions represent a range of rational numbers.
; The first fraction is the smallest rational number in the range, and the second fraction is the largest rational number in the range.
#EncoderParameterValueTypeRationalRange = 8
; Specifies that the parameter is a pointer to a block of custom metadata.
#EncoderParameterValueTypePointer = 9
#sizeOfEncoderParameter := 16 + 3 * 4
#GDIplus_mimeType_BMP = image/bmp
#GDIplus_mimeType_JPG = image/jpeg
#GDIplus_mimeType_GIF = image/gif
#GDIplus_mimeType_PNG = image/png
#GDIplus_mimeType_TIF = image/tiff
; Not used in GDI+ version 1.0.
#EncoderValueColorTypeCMYK = 0
; Not used in GDI+ version 1.0.
#EncoderValueColorTypeYCCK = 1
; For a TIFF image, specifies the LZW compression method.
#EncoderValueCompressionLZW = 2
; For a TIFF image, specifies the CCITT3 compression method.
#EncoderValueCompressionCCITT3 = 3
; For a TIFF image, specifies the CCITT4 compression method.
#EncoderValueCompressionCCITT4 = 4
; For a TIFF image, specifies the RLE compression method.
#EncoderValueCompressionRle = 5
; For a TIFF image, specifies no compression.
#EncoderValueCompressionNone = 6
; Not used in GDI+ version 1.0.
#EncoderValueScanMethodInterlaced = 7
; Not used in GDI+ version 1.0.
#EncoderValueScanMethodNonInterlaced = 8
; Not used in GDI+ version 1.0.
#EncoderValueVersionGif87 = 9
; Not used in GDI+ version 1.0.
#EncoderValueVersionGif89 = 10
; Not used in GDI+ version 1.0.
#EncoderValueRenderProgressive = 11
; Not used in GDI+ version 1.0.
#EncoderValueRenderNonProgressive = 12
; For a JPEG image, specifies lossless 90-degree clockwise rotation.
#EncoderValueTransformRotate90 = 13
; For a JPEG image, specifies lossless 180-degree rotation.
#EncoderValueTransformRotate180 = 14
; For a JPEG image, specifies lossless 270-degree clockwise rotation.
#EncoderValueTransformRotate270 = 15
; For a JPEG image, specifies a lossless horizontal flip.
#EncoderValueTransformFlipHorizontal = 16
; For a JPEG image, specifies a lossless vertical flip.
#EncoderValueTransformFlipVertical = 17
; Specifies multiple-frame encoding.
#EncoderValueMultiFrame = 18
; Specifies the last frame of a multiple-frame image.
#EncoderValueLastFrame = 19
; Specifies that the encoder object is to be closed.
#EncoderValueFlush = 20
; Not used in GDI+ version 1.0.
#EncoderValueFrameDimensionTime = 21
; Not used in GDI+ version 1.0.
#EncoderValueFrameDimensionResolution = 22
; For a TIFF image, specifies the page frame dimension.
#EncoderValueFrameDimensionPage = 23
#GDIplus_lastError = 0
#hGDIplusDLL = 0
#GDIplus_token = 0
; Initialize GDI+ library
GDIplus_Start()
{
local r, structGdiplusStartupInput
#GDIplus_lastError =
; Note: LoadLibrary *must* be called, otherwise on each call of the GDIplus
; functions, AutoHotkey will free the DLL, and we loose the token, crashing AHK!
#hGDIplusDLL := DllCall("LoadLibrary", "Str", "GDIplus.dll")
If (#hGDIplusDLL = 0)
{
MsgBox 16, GDIplus Wrapper, You need the GDIplus.dll in your path!
Exit
}
/*
struct GdiplusStartupInput
{
UINT32 GdiplusVersion;
// Must be 1
DebugEventProc DebugEventCallback;
// NULL
BOOL SuppressBackgroundThread;
// FALSE
BOOL SuppressExternalCodecs;
// Ignored...
}
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/gdicpp/GDIPlus/GDIPlusreference/functions/gdiplusstartup.asp
*/
VarSetCapacity(structGdiplusStartupInput, 4 * 4, 0)
SetInteger(structGdiplusStartupInput, 1) ; Version
r := DllCall("GDIplus\GdiplusStartup"
, "UInt *", #GDIplus_token
, "UInt", &structGdiplusStartupInput
, "UInt", 0)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdiplusStartup (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
Return r
}
; Close GDI+ library
GDIplus_Stop()
{
#GDIplus_lastError =
DllCall("GDIplus\GdiplusShutdown"
, "UInt", #GDIplus_token)
DllCall("FreeLibrary", "UInt", #hGDIplusDLL)
#hGDIplusDLL := 0
}
; Load a bitmap from a file
GDIplus_LoadBitmap(ByRef @bitmap, _fileName)
{
local r, ufn
#GDIplus_lastError =
GetUnicodeString(ufn, _fileName)
r := DllCall("GDIplus\GdipCreateBitmapFromFile"
, "UInt", &ufn
, "UInt *", @bitmap)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdipCreateBitmapFromFile (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
Return r
}
; Load an image (bitmap or vector) from a file
GDIplus_LoadImage(ByRef @image, _fileName)
{
local r, ufn
#GDIplus_lastError =
GetUnicodeString(ufn, _fileName)
r := DllCall("GDIplus\GdipLoadImageFromFile"
, "UInt", &ufn
, "UInt *", @image)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdipLoadImageFromFile (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
Return r
}
; Load a bitmap from the clipboard
GDIplus_LoadBitmapFromClipboard(ByRef @bitmap)
{
local r, handle
#GDIplus_lastError =
r := DllCall("OpenClipboard", "UInt", 0)
If (r = 0)
{
#GDIplus_lastError := "OpenClipboard (" . A_LastError . ") " . ErrorLevel
Return -1
}
handle := DllCall("GetClipboardData"
, "UInt", 2)
; CF_BITMAP = 2, CF_DIB = 8
If (r = 0)
{
#GDIplus_lastError := "GetClipboardData (" . A_LastError . ") " . ErrorLevel
Return -1
}
If (handle = 0)
{
#GDIplus_lastError := "GDIplus_LoadBitmapFromClipboard: No image in clipboard"
Return -1
}
r := DllCall("GDIplus\GdipCreateBitmapFromHBITMAP"
, "UInt", handle
, "UInt", 0
, "UInt *", @bitmap)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdipCreateBitmapFromHBITMAP (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel . " " . A_LastError
}
Return r
}
; Save an image on a file
GDIplus_SaveImage(_image, _fileName, ByRef @clsidEncoder, ByRef @encoderParams)
{
local r, ufn, encoderAddr
#GDIplus_lastError =
If @encoderParams = NONE
encoderAddr := 0
Else
encoderAddr := &@encoderParams
GetUnicodeString(ufn, _fileName)
r := DllCall("GDIplus\GdipSaveImageToFile"
, "UInt", _image
, "UInt", &ufn
, "UInt", &@clsidEncoder
, "UInt", encoderAddr)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdipSaveImageToFile (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
Return r
}
GDIplus_GetEncoderCLSID(ByRef @encoderCLSID, _mimeType)
{
local r, numEncoders, size, encoders, encoderAddr, sizeImageCodecInfo
local addr, mimeTypeAddr, mimeType, codecIdentifierAddr
#GDIplus_lastError =
; What size do we need?
r := DllCall("GDIplus\GdipGetImageEncodersSize"
, "UInt *", numEncoders
, "UInt *", size)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdipGetImageEncodersSize (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
; Allocate this size
VarSetCapacity(encoders, size, 0)
; And get the listing of encoders
r := DllCall("GDIplus\GdipGetImageEncoders"
, "UInt", numEncoders
, "UInt", size
, "UInt", &encoders)
If (r != #GDIplusOK)
{
#GDIplus_lastError := "GdipGetImageEncoders (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
encoderAddr := &encoders
sizeImageCodecInfo := 76
mimeTypeOffset := 48
/*
class ImageCodecInfo
{
// Size: 2 * 16 + 11 * 4 = 76
public: // Offsets / Sizes (4 by default)
// Codec identifier.
CLSID Clsid; // 0 / 16
// File format identifier. GUIDs that identify various file formats
// (ImageFormatBMP, ImageFormatEMF, and the like) are defined in Gdiplusimaging.h.
GUID FormatID; // 16 / 16
// Pointer to a null-terminated string that contains the codec name.
const WCHAR* CodecName; // 32
// Pointer to a null-terminated string that contains the path name of the DLL
// in which the codec resides. If the codec is not in a DLL, this pointer is NULL.
const WCHAR* DllName; // 36
// Pointer to a null-terminated string that contains the name of the file format used by the codec.
const WCHAR* FormatDescription; // 40
// Pointer to a null-terminated string that contains all file-name extensions associated with the codec.
// The extensions are separated by semicolons.
const WCHAR* FilenameExtension; // 44
// Pointer to a null-terminated string that contains the mime type of the codec.
const WCHAR* MimeType; // 48
// Combination of flags from the ImageCodecFlags enumeration.
DWORD Flags; // 52
// Integer that indicates the version of the codec.
DWORD Version; // 56
// Integer that indicates the number of signatures used by the file format associated with the codec.
DWORD SigCount; // 60
// Integer that indicates the number of bytes in each signature.
DWORD SigSize; // 64
// Pointer to an array of bytes that contains the pattern for each signature.
const BYTE* SigPattern; // 68
// Pointer to an array of bytes that contains the mask for each signature.
const BYTE* SigMask; // 72
};
// Size: 4 + 2 + 2 + 8 = 16
typedef struct _GUID {
unsigned long Data1;
unsigned short Data2;
unsigned short Data3;
unsigned char Data4[ 8 ];
} GUID;
typedef GUID CLSID;
*/
; Loop through all the codecs
codecIdentifierAddr = 0
Loop %numEncoders%
{
addr := encoderAddr + 48
mimeTypeAddr := *addr + (*(addr + 1) << 8) + (*(addr + 2) << 16) + (*(addr + 3) << 24)
mimeType := GetAnsiStringFromUnicodePointer(mimeTypeAddr)
If (mimeType = _mimeType)
{
; We found it!
codecIdentifierAddr := encoderAddr
Break
}
encoderAddr += sizeImageCodecInfo
}
If (codecIdentifierAddr = 0)
{
; Not found
r := #GpStatus@13
; UnknownImageFormat
#GDIplus_lastError := "GDIplus_GetEncoderCLSID (" . r . ": " . #GpStatus@%r% . ") " . ErrorLevel
}
Else
{
; Copy the CLSID of the codec
VarSetCapacity(@encoderCLSID, #sizeOfCLSID, 0)
DllCall("RtlMoveMemory"
, "UInt", &@encoderCLSID
, "UInt", codecIdentifierAddr
, "Int", #sizeOfCLSID)
}
Return r
}
; Initialize the encoder parameters
GDIplus_InitEncoderParameters(ByRef @encoderParameters, _paramCount)
{
local r
; Initialize encoder parameters (blank)
VarSetCapacity(@encoderParameters, 4 + _paramCount * #sizeOfEncoderParameter, 0)
Return 0
}
; Add one encoder parameter (currently only Long ones)
GDIplus_AddEncoderParameter(ByRef @encoderParameters, _categoryGUID, ByRef @value)
{
local r, size, clsid, guid, count, parameterOffset
/*
class EncoderParameters
{
public:
UINT Count; // Number of parameters in this structure
EncoderParameter Parameter[1]; // Parameter values
};
*/
; Get current number of parameters
count := GetInteger(@encoderParameters, 0)
parameterOffset := 4 + count * #sizeOfEncoderParameter
; Add another
count++
size := VarSetCapacity(@encoderParameters)
If (size <4 + count * #sizeOfEncoderParameter)
{
#GDIplus_lastError = GDIplus_AddEncoderParameter (@encoderParameters is too small, call GDIplus_InitEncoderParameters with proper number of parameters)
Return -1
}
SetInteger(@encoderParameters, count, 0)
; Number of EncoderParameter's
/*
class EncoderParameter
{
public:
// Identifies the parameter category. (EncoderCompression, EncoderColorDepth, EncoderQuality, and the like) are defined in Gdiplusimaging.h.
GUID Guid;
// Number of values in the array pointed to by the Value data member.
ULONG NumberOfValues;
// Identifies the data type of the parameter. The EncoderParameterValueType enumeration in Gdiplusenums.h defines several possible value types.
ULONG Type;
// Pointer to an array of values. Each value has the type specified by the Type data member.
VOID* Value;
};
*/
GetUnicodeString(clsid, _categoryGUID)
VarSetCapacity(guid, #sizeOfCLSID, 0)
r := DllCall("Ole32\CLSIDFromString"
, "UInt", &clsid
, "UInt", &guid
, "UInt")
If (r != 0)
; NOERROR
{
If (r = 0x800401F3)
; CO_E_CLASSSTRING
#GDIplus_lastError = CLSIDFromString (CO_E_CLASSSTRING: The class string was improperly formatted.)
Else If (r = 0x80040151)
; REGDB_E_WRITEREGDB
#GDIplus_lastError = CLSIDFromString (REGDB_E_WRITEREGDB: The CLSID corresponding to the class string was not found in the registry.)
Else
#GDIplus_lastError = CLSIDFromString (Unknown error: %r%)
Return r
}
; Set Guid
DllCall("RtlMoveMemory"
, "UInt", &@encoderParameters + parameterOffset
, "UInt", &guid
, "Int", #sizeOfCLSID)
parameterOffset += #sizeOfCLSID
; Set NumberOfValues
SetInteger(@encoderParameters, 1, parameterOffset)
parameterOffset += 4
; Set Type
SetInteger(@encoderParameters, #EncoderParameterValueTypeLong, parameterOffset)
parameterOffset += 4
; Set Value
SetInteger(@value, @value)
; Overwrite the @value storage space with the value it contained
SetInteger(@encoderParameters, &@value, parameterOffset)
Return 0
}
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Non Function Code Start
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
OnExit, handle_exit
main:
FileCreateDir, screens
FileCreateDir, thumbs
WinGet, hw_frame, id, "Program Manager" ; Desktop ?
hdc_frame := DllCall( "GetDC", "uint", hw_frame )
hdc_frame_full := DllCall( "GetDC", "uint", hw_frame )
counter:=0 ; thumbnails
counter_f:=0 ; fullscreens
thumb_w:= 200
thumb_h:= ceil( thumb_w * A_ScreenHeight / A_ScreenWidth ) ; keep screenratio
use_antialize := 1
; buffer
hdc_buffer := DllCall( "gdi32.dll\CreateCompatibleDC" , "uint", hdc_frame )
hbm_buffer := DllCall( "gdi32.dll\CreateCompatibleBitmap" , "uint", hdc_frame, "int", thumb_w, "int", thumb_h )
r := DllCall( "gdi32.dll\SelectObject" , "uint", hdc_buffer, "uint", hbm_buffer )
hdc_buffer_full := DllCall( "gdi32.dll\CreateCompatibleDC" , "uint", hdc_frame_full )
hbm_buffer_full := DllCall( "gdi32.dll\CreateCompatibleBitmap" , "uint", hdc_frame_full, "int", A_ScreenWidth, "int", A_ScreenHeight )
r_full := DllCall( "gdi32.dll\SelectObject" , "uint", hdc_buffer_full, "uint", hbm_buffer_full )
; comment this line for speed but less quality
if use_antialize = 1
DllCall( "gdi32.dll\SetStretchBltMode", "uint", hdc_buffer, "int", 4 ) ; Halftone better quality with stretch
return
#c::
SaveImage:
counter := counter +1
FormatTime, myTime, , yyyyMMdd_hhmmss
fileNameDestP = thumbs\T_%myTime%_%counter%_%thumb_w%x%thumb_h%.png
If (GDIplus_Start() != 0)
Goto GDIplusError
; Copy BMP from DC
DllCall( "gdi32.dll\StretchBlt"
, "uint", hdc_buffer, "int", 0, "int", 0, "int", thumb_w, "int", thumb_h
, "uint", hdc_frame, "int", 0, "int", 0, "int", A_ScreenWidth, "int", A_ScreenHeight, "uint", 0x00CC0020 )
DllCall( "GDIplus\GdipCreateBitmapFromHBITMAP", uint, hbm_buffer, uint, 0, uintp, bitmap )
; Save to PNG
If (GDIplus_GetEncoderCLSID(pngEncoder, #GDIplus_mimeType_png) != 0)
Goto GDIplusError
noParams = NONE
If (GDIplus_SaveImage(bitmap, fileNameDestP, pngEncoder, noParams) != 0)
Goto GDIplusError
Gosub GDIplusStop
Return
#v::
SaveImage_Full:
counter_f := counter_f +1
FormatTime, myTime, , yyyyMMdd_hhmmss
fileNameDestP = screens\S_%myTime%_%counter_f%_%A_ScreenWidth%x%A_ScreenHeight%.png
If (GDIplus_Start() != 0)
Goto GDIplusError
; Copy BMP from DC
DllCall( "gdi32.dll\BitBlt"
, "uint", hdc_buffer_full, "int", 0, "int", 0, "int", A_ScreenWidth, "int", A_ScreenHeight
, "uint", hdc_frame_full, "int", 0, "int", 0, "uint", 0x00CC0020 )
DllCall( "GDIplus\GdipCreateBitmapFromHBITMAP", uint, hbm_buffer_full, uint, 0, uintp, bitmap )
; Save to PNG
If (GDIplus_GetEncoderCLSID(pngEncoder, #GDIplus_mimeType_png) != 0)
Goto GDIplusError
noParams = NONE
If (GDIplus_SaveImage(bitmap, fileNameDestP, pngEncoder, noParams) != 0)
Goto GDIplusError
Gosub GDIplusStop
Return
GDIplusError:
GDIplusStop:
If (#GDIplus_lastError != "")
MsgBox 16, GDIplus Test, Error in %#GDIplus_lastError%
GDIplus_Stop()
Return
#x::
handle_exit:
DllCall( "gdi32.dll\DeleteObject", "uint", hbm_buffer )
DllCall( "gdi32.dll\DeleteDC" , "uint", hdc_frame )
DllCall( "gdi32.dll\DeleteDC" , "uint", hdc_buffer )
ExitApp
return
Show Posts
