10701
General Software Discussion / Re: Do you use any Desktop Theme Software on Windows?
« on: August 05, 2007, 04:37 AM »
Thanks Phil & Eóin for those links
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Specs:gets 4 stars from everyone..
Gesamtkapazität: 2048 MB
Anzahl Module: 2
Bauform: DIMM
Typ: RAM-DDR2
Standard: DDR2 - 800 (PC2 - 6400)
Timings:
CAS Latency (CL):5
RAS-to-CAS-Delay (tRCD): 5
RAS-Precharge-Time (tRP): 5
Row-Active-Time (tRAS): 12
Anschluss: 240-pin
Spannung: 1,9 Volt
Spannungsbereich: from 1,9 Volt to 2,2 Volt
... but i have patched windows to support custom themes ...-jgpaiva (August 04, 2007, 03:13 PM)
Thanks for the update, Tomos! Did you get a chance to test the ODF filter yet?nope,-zridling (August 03, 2007, 10:44 PM)
There are new service packs for TextMaker 2006 and PlanMaker 2006 [Spreadsheet programme] for Windows. These service packs bring some significant improvements and bug fixes to SoftMaker Office, and we recommend that you install them. Also, the TextMaker service pack adds an OpenDocument export filter to TextMaker 2006, letting you not only read but also write documents in OpenDocument and OpenOffice.org file formats. Download: http://www.softmaker...lish/servpack_en.htm |
---------------------------------------------------------------------- Reminder: SoftMaker Presentations beta ---------------------------------------------------------------------- If you haven't already downloaded it, we'd like to remind you that there is a fresh beta of SoftMaker Presentations 2007 for Windows available on our web site. This new beta version includes the following important bug fixes and improvements: * PDF export (this will also be available in the next major release of TextMaker and PlanMaker...) * Improved import and export of PowerPoint files * Improved management of slide masters * Many new features such as pens, text markers or fading effects have been added. * Now also available with menus and dialogs in Dutch, Italian, and Bulgarian. * Additional bug fixes and performance improvements If you are just starting now with the beta test, you need a serial number. Please visit this page: http://www.softmaker...om/english/pr_en.htm |
CPU Lüfter: Arctic-Cooling Alpine 64
€ 9,-*
CPU Sockel AM2: AMD Athlon64 X2 4400+
€ 89,-*
Floppy-Laufwerke: Teac Diskettenlaufwerk (with card-reader)
€ 24,-*
Netzteile: 430Watt: Seasonic S12II-430HB
€ 74,-*
Gehäuse Midi Tower: Cooler Master Elite RC-330
€ 33,-*
Modem analog: Devolo MicroLink 56K
€ 9,90*
DVD-Brenner SATA: LG GSA-H62N
€ 39,90*
Gehäuse Lüfter: Arctic-Cooling AF12025 Fan L Box
2 x
€ 3,40*
€ 6,80*
Mainboards Sockel AM2: GigaByte MA69G-S3
€ 74,-*
Festplatten 3,5 Zoll SATA: Samsung HD321KJ 320GB
2 x
€ 64,-*
€ 128,-*
Arbeitsspeicher MDT DIMM 2 GB DDR2-800 Kit
€ 96,-*
Rounded figures:
€ 585* + €60 (Cost of Building) = €645 + Versand = €655
CPU Lüfter: Arctic-Cooling Alpine 64 CPU: Sockel AM2 AMD Athlon64 X2 4400+ Floppy-Laufwerke: Teac Diskettenlaufwerk (with card-reader) Netzteile: Seasonic S12II-380HB (380W) Gehäuse Midi Tower: Cooler Master Elite RC-330 Modem analog: Devolo MicroLink 56K DVD-Brenner: SATA Samsung SH-S203B Gehäuse Lüfter: Arctic-Cooling AF12025 Fan L Box Mainboards: Sockel AM2 Asus M2A-VM/HDMI Festplatten: 2 x 3,5 Zoll SATA Samsung HD321KJ (320GB) Arbeitsspeicher: MDT DIMM 2 GB DDR2-800 Kit |
Just a quick comment, make sure the PSU power rating is AMD approved, is suitable for the mobo type and fit the case. I can't read German so maybe it's all in the link you've provided.I'll check that out Phil-PhilB66 (August 02, 2007, 06:02 AM)
I wouldn't be very comfortable about a shop that doesn't mention which brand the powersupply is, though. It might be 500W or 550W, but if it can't deliver stable voltages when under load, you're going to have an unstable system. Also, if it's not energy efficient, you risk getting a higher power bill if you have the system on a lot.
Does the shop offer some picture of the casing? Especially inside pictures. It's important that the PSU isn't going to be located right above the motherboard, as with some smaller cases.-f0dder (August 02, 2007, 04:44 AM)
What's that burner you have in the budget? And one final thing: if your HDD is a Seagate, be sure to remove a little jumper that comes in the far right side, to avoid limiting the bandwidth available for the hard drive to 150 MB/s (not that you're going to fill all that...). The little one is a bitch, so don't give up easily. I think that's all...forgot these:-Lashiec (August 01, 2007, 07:15 PM)
which made me wonder are they even dodgy if you dont use them muchgood question. id like to know that answer too.-mouser (August 02, 2007, 02:43 AM)
The study found that indoor particle levels in the office air increased fivefold during work hours due to printer use. Printers emitted more particles when operating with new toner cartridges and when printing graphics and images that require greater quantities of toner. |
Also, be sure to have that case well cooled if you plan to go with the on-board video. I heard they heat quite a bit if you stress them.considering getting new fans anyway (want reasonable quiet), but will probably have a look inside first & see what the manual or website for mobo says about it-Lashiec
Could you give us some insight over that PSU? 550W may be overkill for your system, although that's not my main concern but the quality of the components housed inside it. What's the price?unfortunately they dont give any more details about the PSU-Lashiec
there is such a smiley, i've seen it. anyone have a link?[/spoiler]-Wordzilla (August 01, 2007, 12:45 PM)
Search!!
https://www.donation...3/1Small/WHISTLE.GIF-mouser (August 01, 2007, 12:41 PM)
I'd get much better value for money building one.just a warning: my experience has been that this is *not* the case. i would highly recommend you try to build a pc for one and only one reason: because you enjoy the process. My belief is that currently building your own will cost you more in parts, is MUCH more risky in terms of something going wrong, and puts you in a much more precarious situation should your computer need repair.
in summary: building a pc on your own can be fun -- but that's the only reason you should try it.-mouser (August 01, 2007, 12:41 PM)