Login with username and password (forgot your password?)

I would like the program to read and display the file comments. Comments formed in Total Commander and located in files "descript.ion" (ctrl+z in TC). Mayby next option in Report Column

This only happens sometimes. Now, for example, turned off FARR, next turned on FARR and launch history is remembered. When else clears me the all launch history. I do not know what it depends on. Mayby delete history when dont choose "Exit Find and Run Robot" ??

FARR portable directory is C:/Program Files

Instead of installing just unpacked zip.

All not read-only

I not use ConfigDir.ini

ConfigDir_Default.ini

// IMPORTANT NOTE: Lines starting with // are COMMENTS; you need to remove // to make a line active

// NOTE: When the program starts, it will check for the existence of the file ConfigDir.ini,
//  if that file exists, IT will be used.  If it is not found, then program will fall back to
//  ConfigDir_Default.ini.  So if you wish to overide the default PORTABLE configuration specified
//  in ConfigDir_Default.ini just create your own ConfigDir.ini file.

PORTABLE=TRUE
CONFIGDIR = .


// CONFIGDIR = %MYDOCUMENTS%

// This file (ConfigDir.ini) defines the directory where all configuration
//  files for the program will be stored.
// There should be only 1 actual line in this file that has any meaning,
//  the CONFIGDIR assignmane above.  Everything else here is just comments.
//
// By default it is normally set to the program directory itself, meaning
//  that all configuration/ini/settings/preferences will be store here
//  with this ConfigDir.ini file.  This is also best for when you want to
//  put the program on a usb drive.
// Sometimes it is preferable to store the configuration files in a
//  different directory, like a "C:\Documents and Settings" subdirectory
//  which is designed to store program configuration data, or a custom
//  directory specified by a user on a separate drive.
//
// TIPS:
// 1. You can comment out lines by prefacing them with //
// 2. You can use the following replacements:
//     . (actual program directory -- use this for portable usb, etc.)
//     %MYDOCUMENTS% (like C:\My Documents)
//     %APPDATA% (like C:\Documents and Settings\{username}\Application Data)
//     %PROFILE% (like C:\Documents and Settings\{username})
//     %COMMONAPPDATA% (like C:\Documents and Settings\All Users\Application Data)
// 3. The specified directory will be created if it doesn't exist.
// 4. If configuration files are not found in the specified directory,
//     any existing configuration files in the app dir will be copied
//     from the app dir to the specified directory.
// 5. If you edit this file while the program is running you need to
//     exit and restart the program before it will take effect.
//
// EXAMPLES:
//    CONFIGDIR=.
//    CONFIGDIR=%MYDOCUMENTS%
//    CONFIGDIR=E:\MyCleverSettings\
//    CONFIGDIR=%APPDATA%
//
// NOTE: the company and application subdirectory name will automatically be
//  added to the path specified (except for %APPDIR% which includes the name
//  already, i.e.:
//    "E:\MyCleverSettings" -> "E:\MyCleverSettings\DonationCoder\AppName\"
//
//
// NEW:
//  You can now signify that an app should run in portable mode (no files saved to anything but app dir)
//  by specifying the uncommented line:
//   PORTABLE=TRUE
//
/////////////////////////////////////////////////////////////////////////////

I think not. It takes some time. I usually just close the operating system without a separate closing the FARR. Every time I need to close FARR?

Launch history not work. I mean that every time I open the program list "launch history " is clean. In the settings I have set "Add launched files to launch history". It works, but only to close the computer. I use FARR version 2.200.01 portable, Windows XP

FarrMilk uses the computers locale settings to parse dates. So if your computer's locale is set to polish and "31 stycznia 2013" is how you'd write a date in Poland then what you're trying to do should work, i.e. if it doesn't work it's a bug in FarrMilk.

My locale settings is polish.

I just tried with a task having 369 characters and it displayed and worked flawlessly. Can you be more specific in where you see a problem? (maybe make a screenshot)

screenshot
Only 511 characters. Breaks in the middle of a word "przez"

all text: "Asus planuje portfolio smartfonów z systemem Windows Phone 8. Być możne powstanie nawet smartfon połączony z tabletem na kształt androidowej serii Asus Padfone. Benson Lin, wiceszef Asusa, powiedział w wywiadzie dla Wall Street Journal, że koncepcja Padfone'a ma sens również w przypadku Windows 8. Biorąc jednak pod uwagę, że w Padfone'ach cała moc obliczeniowa, jak i sam system zainstalowane są w telefonie, wizja Asusa może być trudna do zrealizowania. Wszystkie systemy Windows 8 - od tych komputerowych, przez Windows 8 RT po Windows Phone 8 bazują na tym samym jądrze, to jednak za mało by umożliwić prostą transformację smartfonu w tablet i tabletu w netbooka. Są dwa wyjścia z sytuacji. Jednym z nich jest zainstalowanie Windows Phone 8 w telefonie i Windows 8 w tablecie, z olbrzymią dawką dodatków umożliwiających synchronizację systemów. Drugim, umieszczenie Windows 8 RT w smartfonie i dodanie do systemu aplikacji umożliwiających wykonywanie połączeń głosowych. Być może pojawi się jeszcze bramka numer trzy, czyli chęć współpracy nad nowym produktem ze strony Microsoftu i przebudowa interfejsu na działający w dwóch trybach. W przypadku Androida ujednolicenie platformy nastąpiło wraz z premierą systemu w wersji 4.0, który instalować można zarówno na telefonach, jak i na tabletach. W każdym razie, po zapowiedzi ze strony LG, będziemy mieli kolejnego dużego gracza ze smartfonami wyposażonymi w system Microsoftu."

Mayby polish letters - ó, ą, ć, ś, ń generate the errors ??

Changing the date of a task does not work. Clears the date completely.

If you mean changing a task's due date: I just tried that and it worked. Can you be more specific in what you're doing exactly (an example maybe)?

OK. It all depends on how I write the date. Previously, I wrote, "31 stycznia 2013" (polish 31 January 2013). Like on RTM website. When I wrote "31-01-2013" - it works. What formats does it work?

Changing the date of a task does not work. Clears the date completely.

Reload ??

Please do something about this problem:
http://www.donationcoder....m/index.php?topic=30924.0

I have a problem that when tasks with longer names - plugin displays only about 196 first characters of the name. Can be done to show the whole name, even the longest?

I do not really fit me because I often use the "TypingAid" program that inserts text strings containing the letter "ó". Not always so I use the keyboard to insert the letter "ó". When I insert a string with the letter "ó" start options window. I would like to disable shortcut "alt + o" in the FARR

Anyway, as I see the "left ctrl + left alt + o" have the same effect. Open options window.

I have a problem with polish letters "ó" (right alt + o). When I type it into the program window to search for, then runs to me the options window. Can turn it off? I mean the shortcut "alt + o" to open options.

Is there a plugin for FARR which enable the handling of notes in Evernote?

The plug has stopped working. An attempt to start it freezes the whole program. It has just a few computers. 

How to make a secure update? I have a properly working and configured version 2.99.02. I use it in portable mode.I want to upgrade. Which files must be overwritten ? Only FindAndRunRobot.exe ?

I made myself such an alias:
Ceneo $$1 | http://www.ceneo.pl/;szukaj-$$1 /ICON=ceneo.ico

I do not want to work. What did I do wrong?

Phrase "$$1" is the text that I type after the keyword "Ceneo"?

Edit:
I have it
lacked regular expression: ^ceneo(.*)

Ok. Already invented. Sorry for stupid question

Hit "esc" -> hit ctrl+c and is OK

How to achieve the effect of copy typed text to the clipboard? Often I use FARR as a "notepad" to save the information (FARR window is on top of it and writes down what is underneath) and I would like to typed text after you click the enter copied to the clipboard