Author Topic: Thread on 3d Printing Cody Model (Read 100,573 times)

KynloStephen66515 · « **Reply #75 on:** April 04, 2018, 11:23 PM »

Quote from: Stephen66515 on April 04, 2018, 10:43 PM

𝓘 𝓽𝓱𝓲𝓷𝓴 𝓲𝓽 𝓲𝓼 𝓼𝓪𝓯𝓮 𝓽𝓸 𝓼𝓪𝔂 𝓽𝓱𝓪𝓽 𝔀𝓮 𝓪𝓵𝓵 𝔀𝓪𝓷𝓽 𝓸𝓷𝓮!

Quote from: tomos on April 04, 2018, 11:11 PM

[attachment 1 not found]
not sure what Stephen is saying, but I *probably* agree with him...
Definitely agree with Deozaan though :Thumbsup:

I said "I think it is safe to say that we all want one!"

wraith808 · « **Reply #76 on:** April 05, 2018, 12:23 AM »

Quote from: Stephen66515 on April 04, 2018, 10:43 PM

𝓘 𝓽𝓱𝓲𝓷𝓴 𝓲𝓽 𝓲𝓼 𝓼𝓪𝓯𝓮 𝓽𝓸 𝓼𝓪𝔂 𝓽𝓱𝓪𝓽 𝔀𝓮 𝓪𝓵𝓵 𝔀𝓪𝓷𝓽 𝓸𝓷𝓮!

Just one question... why did you use a different font?

mouser · « **Reply #77 on:** April 05, 2018, 01:53 AM »

Quote

why did you use a different font?

It's stephen.
That is all you need to know. There is no why.

wraith808 · « **Reply #78 on:** April 05, 2018, 02:39 AM »

Quote from: mouser on April 05, 2018, 01:53 AM

Quote
why did you use a different font?

It's stephen.
That is all you need to know. There is no why.

Why ^is _there ^no Why?

cranioscopical · « **Reply #79 on:** April 05, 2018, 02:49 AM »

It's just too infra dig… sheer vowel play.

mouser · « **Reply #80 on:** April 05, 2018, 04:09 AM »

I wonder if I could print an 8" x 8" x 8" cody award..

KynloStephen66515 · « **Reply #81 on:** April 05, 2018, 04:15 AM »

Quote from: mouser on April 05, 2018, 04:09 AM

I wonder if I could print an 8" x 8" x 8" cody award..

Print an 8' x 8' x 8' one...then I'll be impressed

mouser · « **Reply #82 on:** April 07, 2018, 07:05 AM »

I printed out the 8"x8"x8" baby cody model.. The scaling up had a couple of issues.. the most serious one was I enabled supports and they kind of merged into the model, which has required some facial reconsutruction for baby cody. No cost was spared to give him a proper beak, but I will need to wait until he wakes up from surgery to determine whether it was a success. If so he will go in for painting and then have his photo taken..

ayryq · « **Reply #83 on:** April 07, 2018, 11:44 AM »

Quote from: mouser on April 07, 2018, 07:05 AM

I printed out the 8"x8"x8" baby cody model.

How long did it take? And how much filament?

mouser · « **Reply #84 on:** April 07, 2018, 11:52 AM »

it took 21 hours. and a LOT of filament.. not sure how much.. maybe 1/3 to 1/4 of a spool?

mouser · « **Reply #85 on:** April 09, 2018, 03:09 AM »

What do people want printed on their coins?

I suppose first we need to decide who is getting the first batch of 12 cody awards, and then ask them what they want their coin bases to say...

Here are the kinds of reasons we would nominate someone to get a hand painted custom cody award:

Helping manage the forum (moderators who have volunteered their time to ban spammers, etc.) or otherwise help improve the site (helping organize fundraiser, and new site etc.)
Coding snack authors who continue to do lots of coding snacks
Users with the very highest post counts
Super donors

So who should the first 12 go to?

wraith808 · « **Reply #86 on:** April 09, 2018, 11:35 AM »

You said coding snacks, which immediately made me think of skwire. It's pretty amazing how he finds the time to help so many people so quickly!

skwire · « **Reply #87 on:** April 09, 2018, 03:00 PM »

Here's an incomplete list of who I think of for various reasons (and in no particular order): 4wd, Ath, hamradio, c.gingerich, Deozaan, Skrommel, Stoic Joker, wraith808, IainB, tomos, lanux128, app, rjbull, rgdot, 40Hz, cranioscopical, & Stephen66515.

Deozaan · « **Reply #88 on:** April 09, 2018, 04:10 PM »

Nudone for sure!

And didn't Carol Haynes used to be more involved in the administration of the site in the earlier years?

If cranioscopical gets one, then the one he gets should have Cody's face painted in clown makeup.

mouser · « **Reply #89 on:** April 15, 2018, 07:15 AM »

Here's some photos of the 8"x8"x8" giant baby cody, painted:
[attachthumb]

KynloStephen66515 · « **Reply #90 on:** April 15, 2018, 02:33 PM »

Omg giant cody is brilliant! You could probably fix him up to look a crap load smoother by using some thick gloss as an undercoat then just repaint the detail points over the thick gloss.

mouser · « **Reply #91 on:** March 01, 2019, 04:03 PM »

I'm finally printing out more 3d cody+coin models.. If I have previously promised to send you a 3d cody, OR IF I SHOULD HAVE, please message me to remind me now!

mouser · « **Reply #92 on:** February 11, 2020, 06:34 PM »

Cody statues are boxed up and ready to bring to post office:
[attach]

mouser · « **Reply #93 on:** February 11, 2020, 10:36 PM »

I'd love to see some photos of people with their cody/nany statues when they arrive.

mouser · « **Reply #94 on:** February 14, 2020, 09:47 PM »

Any cody statues arrive yet?

hamradio · « **Reply #95 on:** February 15, 2020, 12:18 AM »

Quote from: mouser on February 14, 2020, 09:47 PM

Any cody statues arrive yet?

Not the best picture at the moment but...

wraith808 · « **Reply #96 on:** February 15, 2020, 05:36 AM »

Mine did today! I'll try to get a picture up tomorrow!

Deozaan · « **Reply #97 on:** February 17, 2020, 03:56 AM »

Mine came a couple days ago.

Thanks mouser!

wraith808 · « **Reply #98 on:** February 20, 2020, 05:29 PM »

Very nice!

mouser · « **Reply #99 on:** February 24, 2020, 03:04 AM »

It is a huge pain to mail these to destinations outside of the USA.. customs forms and all that.. and not cheap.
So the mugs are probably still the preferred thing to send out.