DonationCoder.com forum
 
Read-only archive. This is a static copy of the DonationCoder.com forum. Reading and searching work as before; logging in, posting and private messages do not.
Archive of 2026-10-21 · About this archive · Main site

Author Topic: HDD - RAID 1 - problem  (Read 5,881 times)

ShuKsT

  • Supporting Member
  • Joined in 2007
  • **
  • Posts: 7
HDD - RAID 1 - problem
« on: September 14, 2007, 02:38 PM »
I've just setup a RAID 1 with 2x 500GB seagate and sometimes when i listen to my music that's located on the raid disks the music freezes

could it be the HDDs? or the motherboard raid controller?
it's an ASUS P5B Deluxe that supports raid 0, 1, 10, 5.

I was using winamp.... It occurred 2 times since yesterday....

Thx in advance :D

Lashiec

  • Member
  • Joined in 2006
  • **
  • Posts: 2,374
Re: HDD - RAID 1 - problem
« Reply #1 on: September 14, 2007, 02:46 PM »
I would go for the RAID controller, but RAID is not exactly my field of expertise. Do you have the latest drivers for the controller and everything?

ShuKsT

  • Supporting Member
  • Joined in 2007
  • **
  • Posts: 7
Re: HDD - RAID 1 - problem
« Reply #2 on: September 14, 2007, 02:51 PM »
I would go for the RAID controller, but RAID is not exactly my field of expertise. Do you have the latest drivers for the controller and everything?

yes latest

f0dder

  • [Well, THAT escalated quickly!]
  • Charter Honorary Member
  • Joined in 2005
  • ***
  • Posts: 9,153
    • Participated in NANY Challenge Once
Re: HDD - RAID 1 - problem
« Reply #3 on: September 16, 2007, 05:32 PM »
Shouldn't really be any problems with RAID mirroring, but it might be an idea checking the S.M.A.R.T status of your disks... unfortunately you can't usually do this with the low-end/onboard RAID stuff...

Does CPU usage shoot up radically when the skipping happens? Does other things freeze, like any on-screen animation or the mouse cursor? Are you using Crapsta or XP?
- carpe noctem

Original address: https://www.donationcoder.com/forum/index.php?topic=9997.0