Restore an Acronis Image in other pc

[Contro]

I have restored an acronis tib from the laptop to the desktop.
All seems well except one little detail.
When I try to shutdown my pc only is reinitiating
No error messages.

OS. Windows 10 home
Drivers in the laptop. I will give a complete list.

In safe mode I can shutdown the pc without problem.
with the shutdown commanda and this modifiers I can shutdown the system : shutdown /p /f

Drivers in the desktop. I will give a complete list. After installed the new drivers from Asus.

Best Regards

these are the drivers from the laptop
ListaDrivers.HPP.21.05.2021.15.41.txt (697.9 KB)
These are the drivers from the pc desktop
ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)

[4wd]

I would perform an In-place Upgrade considering you've just completely changed hardware.

[Contro]

ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)  These are the drivers from the desktop
ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)

The forum don't allow me to insert a txt file.
What wrong ?

[Contro]

ListaDriversMOZ2.desktop.21.05.2021.17.16.txt (704.1 KB)I don't understand why the txt file is not attached as the first.

[Contro]

I just cannot attach the txt file in the forum.

Best Regards
I will try to put as a link to my google drive.

https://drive.google.com/drive/folders/1qxV3CCJhTKXW62A1Ly_eH7MIKc37oyRv?usp=sharing

[Contro]

How can I compare two txt files to see the differences. Even comparing only the starting of x characters of each line.

Best Regards

Note : I can compare with WinMerge

[Contro]

I would perform an In-place Upgrade considering you've just completely changed hardware.

I would prefer an alternative method, best regards
I have a new license, but until the moment I don't need just because the system continues licensed.

[Contro]

I would perform an In-place Upgrade considering you've just completely changed hardware.

I have installed the new drivers of the motherboard desktop asus Z170-K

[Contro]

I am observing differences between the two txt files : laptop and desktop .


Wit WinMerge

[x16wda]

Depending on the Acronis product, some of the boot disks have a separate task (separate from backup/restore) to adjust the O/S for new hardware. If your Acronis boot disk has that, try running it.

And if you have downloaded the drivers for your new hardware, maybe put them all on a USB stick, you can point Acronis to this new group of drivers to make sure it sees what is needed.

[Contro]

Depending on the Acronis product, some of the boot disks have a separate task (separate from backup/restore) to adjust the O/S for new hardware. If your Acronis boot disk has that, try running it.

And if you have downloaded the drivers for your new hardware, maybe put them all on a USB stick, you can point Acronis to this new group of drivers to make sure it sees what is needed.

I restore the original acronis image. Then install the new drivers according to the new motherboard.
So I am supposing some drivers from the laptop may be interfering.
Specially that to shutdown the pc.

So I am trying now to decide what driver is.
In safe mode I can shutdown without problem.

So I need only to determine the wrong driver.

That would be the best possibility. The worst are drivers installed in incorrect order o with problems.

I remember many years ago, under windows xp pro, be six months asking for the problem with the restore function.

The answer was : I was using an usb modem . When I install the driver after others I have the problem.

I hope this time the problem is more simple....

Best Regards

[Contro]

I will try a clean boot. Then activate step by step services and drivers....
I will comment

[Contro]

Depending on the Acronis product, some of the boot disks have a separate task (separate from backup/restore) to adjust the O/S for new hardware. If your Acronis boot disk has that, try running it.

And if you have downloaded the drivers for your new hardware, maybe put them all on a USB stick, you can point Acronis to this new group of drivers to make sure it sees what is needed.

I obtained the help of a technician.
Usually the procedure is restore the image from the laptop. Then installs the new drivers in target.
I assume the problem is that some driver or controller from the laptop may be interfering.
In the shutdown of the desktop. In safe mode don't happen . Do you understand ?

[Contro]

I am trying to collect some links that may be useful to my purpose :

https://answers.microsoft.com/es-es/windows/forum/all/computadora-se-reinicia-cuando-intento-apagar-ya/428b94e8-dc0b-4c4b-889d-9aed8c16ec68
https://mundowin.com/fix-el-ordenador-se-reinicia-en-lugar-de-apagarse/

[Contro]

The process is almost done. I ask for help to a local technician who helps me.
we have problems with shut down the desktop because instead reiniate, but finally we solve the problem with a controller or driver about energy.
Now is almost finished.
The windows 10 home os was well restored and reactivated with a new license.