Thanks to all DCer's that have donated over the years - to the site and to me personally (with many coming from Mouser). Mouser finally made me cash out the credits I'd been storing (for several years) - and some new ones... the result, a lovely new 3D Printer (Anycubic i3 Mega - same as Mouser).
Had a slight bit of trouble with it on day one - printed for 10 minutes then stopped. Seems there was a lose wire to the bed so it wouldn't heat up. After a few photos and instructions from Anycubic support (asking me to test voltages and current) it suddenly started working again - hence the lose wire theory.
I've printed a Baby Cody - it isn't a penguin! (I've only got the black plastic at the moment.)
Now I've got the same printer as Mouser we might be able to improve on the Cody models with a few more experiments, i.e. smoother polygons and all that.
Other than the initial bed temperature problem the whole thing has been very easy to set up. Just a few screws to put the thing together - probably takes about 10 minutes. Levelling the bed - just a few minutes. And that's pretty much it - so you can be printing in well under an hour. Crazy really. And the price - crazy too. I almost bought a printer when you couldn't get one for less than $2000 - now they are close to $200 - I still find it amazing.
Anyway, thanks again to all that have supported DC - you have given the gift of a 3D printer to me - so "thank you very much!"
Had a slight bit of trouble with it on day one - printed for 10 minutes then stopped. Seems there was a lose wire to the bed so it wouldn't heat up. After a few photos and instructions from Anycubic support (asking me to test voltages and current) it suddenly started working again - hence the lose wire theory.
I've printed a Baby Cody - it isn't a penguin! (I've only got the black plastic at the moment.)
Now I've got the same printer as Mouser we might be able to improve on the Cody models with a few more experiments, i.e. smoother polygons and all that.
Other than the initial bed temperature problem the whole thing has been very easy to set up. Just a few screws to put the thing together - probably takes about 10 minutes. Levelling the bed - just a few minutes. And that's pretty much it - so you can be printing in well under an hour. Crazy really. And the price - crazy too. I almost bought a printer when you couldn't get one for less than $2000 - now they are close to $200 - I still find it amazing.
Anyway, thanks again to all that have supported DC - you have given the gift of a 3D printer to me - so "thank you very much!"
Just leave out the "So long" 
