MiniCap Printer

[carlo133]

Hi, I still using your beatiful MiniCap software to capture and print the PC screenshot by using the commandline commands.
Everything works properly, but there is one thing that I do not understand: the printouts images on paper are smaller than the printout images obtained with the standard Print Screen command.
In the MiniCap -printpreview the defaults sets for the print margin is 1 inch.
Is there a way to set a lower margin value ad default, (close to zero), via commandline or by any ini command?
Thanks, Carlo.

[mouser]

Let me see if i can add an easy option to set margins.

[mouser]

Done, will be in next release.

[carlo133]

Tnks! I Will test it! 

[mouser]

Ok please test the most recent beta:

http://www.donationcoder.com/Software/Mouser/MiniCap/downloads/beta/MiniCapSetup.exe
or http://www.donationcoder.com/Software/Mouser/MiniCap/downloads/beta/MiniCapPortable.zip

Use the new printmargin option like:
-printmargin 0

use a value in 10ths of an inch, so "-printmargin 10" for a 1-inch margin.