Author Topic: DONE: turn IE proxy server on/off (Read 130,878 times)

skwire · « **Reply #25 on:** April 11, 2015, 05:29 PM »

You mentioned this is a work computer. Perhaps the proxy settings are locked down?

rajaaqeelasghar · « **Reply #26 on:** April 12, 2015, 01:03 PM »

no, its a laptop and i have administrative rights on it. When I am outside office network then I need to connect office VPN to access official domain (email etc). But I when I am connected with office VPN, i can not use internet unless i enable the proxy. Now, I only need to enable proxy when I am connected to office VPN. when i disconnect VPN, I need to disable proxy to access internet again .

skwire · « **Reply #27 on:** April 12, 2015, 05:38 PM »

I don't know what the issue is. I've tested the application under Win7 Ultimate (64-bit) and it works for me.

rajaaqeelasghar · « **Reply #28 on:** April 13, 2015, 06:43 PM »

Thanks anyways.

thegeekteacher · « **Reply #29 on:** May 09, 2015, 12:09 PM »

IE Proxy toggle works like a charm on 8.1. love it and its simplicity!

skwire · « **Reply #30 on:** May 09, 2015, 12:18 PM »

Quote from: thegeekteacher on May 09, 2015, 12:09 PM

IE Proxy toggle works like a charm on 8.1. love it and its simplicity!

Thank you for the report and welcome to DonationCoder.

Amazing-Xtreme · « **Reply #31 on:** May 12, 2015, 06:12 AM »

Thank you!
Windows 8.1 64bits

Ximinez · « **Reply #32 on:** February 14, 2016, 02:59 PM »

skwire,

Thanks for IEProxyToggle ... I had a need for it today and your app nails it! It runs smoothly on Win10 64-bit, as provided, but because I found the tray icons too subtle, I tried to swap out the 0.ico and 1.ico files as per the changelog.txt file instructions.

I found 2 icon substitutions that I liked (0.ico and 1.ico), but when I replaced the default icons by renaming the PNG files to their proper ones and then resizing them in MS Paint from 48 to 16 pixels to match the size of the defaults, the program would not run correctly.

FYI:

1) I exited the program before replacing the icon files
2) I tried running the program as admin by right-clicking "IEProxyToggle.exe" file and selecting "Run as administrator"
3) I rebooted the computer

In all cases, running the program would return the same error:

Code

---------------------------
IEProxyToggle.exe
---------------------------
Error:  Can't load icon.

Specifically: K:\User\Documents\Apps\IEProxyToggle\res\1.ico

	Line#
--->	107: Menu,Tray,Icon,Temp_Dir . "\" . GetProxy() . ".ico"

The current thread will exit.
---------------------------
OK   
---------------------------

The program itself appears to run correctly because toggling the proxy state will enable or disable it, but the error message appears each time with only the "Specifically: K:\User\Documents\Apps\IEProxyToggle\res\1.ico" line changing the name of the icon file at the end of the string, i.e., from "...\res\0.ico" to "...\res\1.ico".

Do you have any idea why this may be happening?

Thanks for such a simple yet effective app!

Ximinez · « **Reply #33 on:** February 14, 2016, 03:13 PM »

Quote from: Ximinez on February 14, 2016, 02:59 PM

... Do you have any idea why this may be happening? ...

No worries ... I figured it out on my own!! (don't you just love when that happens?!)

I ended up running those new icon files through an online editor (shout out to xiconeditor.com !!), replacing the ones I created there with the ones I originally modified for pixel size and file name, and voilà, the program runs correctly with the right icons showing up when toggling.

Thanks again, skwire, for a wonderful app.

skwire · « **Reply #34 on:** February 16, 2016, 06:57 AM »

Hi, Ximinez, and welcome to the DonationCoder site.

Quote from: Ximinez on February 14, 2016, 03:13 PM

No worries ... I figured it out on my own!! (don't you just love when that happens?!)

I'm glad you figured it out as I was going to suggest you convert the PNG files to ICO files.

Good to know it works on Windows 10, too.

Ximinez · « **Reply #35 on:** February 16, 2016, 12:21 PM »

Quote from: skwire on February 16, 2016, 06:57 AM

Hi, Ximinez, and welcome to the DonationCoder site ...

LOL ... I've been a member of this site since 2008, but this is my first time posting so I guess a welcome seems appropriate.

Thank-you skwire!

MartyvH · « **Reply #36 on:** February 18, 2016, 02:09 AM »

Quote from: skwire on March 03, 2012, 02:37 AM

Give this a try: IE Proxy Toggle

Green icon means the proxy is enabled; a grey icon means disabled. Single-click the tray icon to toggle or use the right-click menu. Tested on XPSP3/32 and W7/64.

[attachimg=1,msg280517]

I had to register to thank you for this perfect app. One click turns it on or off. Working fine on Windows Server 2012 R2. So awesome.

skwire · « **Reply #37 on:** February 18, 2016, 04:18 PM »

Quote from: MartyvH on February 18, 2016, 02:09 AM

I had to register to thank you for this perfect app. One click turns it on or off. Working fine on Windows Server 2012 R2. So awesome.

Thanks for taking the time to register and welcome to the DonationCoder site.

I'm glad the application is working well for you.

autismdad · « **Reply #38 on:** February 18, 2017, 11:51 PM »

skwire,

Was in dire need of a utility like this for work and this is amazing! So easy and it will make my life a lot easier. Thank you for this utility and the work you have done on it! It's a godsend!

Quote from: skwire on July 29, 2012, 10:45 PM

Website | Download v1.0.1 - 2012-07-29 + Added commandline mode. Examples: 1) c:\path\to\ieproxytoggle.exe -on 2) c:\path\to\ieproxytoggle.exe -off 3) c:\path\to\ieproxytoggle.exe -toggle

skwire · « **Reply #39 on:** February 19, 2017, 03:23 AM »

You're quite welcome and I'm glad you find it useful. Welcome to the DonationCoder site as well.

josephzjw · « **Reply #40 on:** June 14, 2018, 01:18 AM »

It work for my computer. Thank you!

skwire · « **Reply #41 on:** June 15, 2018, 02:02 PM »

You are welcome. I'm glad you find it useful.

Ianeskiii · « **Reply #42 on:** June 30, 2018, 01:44 AM »

Quote from: skwire on April 11, 2015, 05:29 PM

You mentioned this is a work computer. Perhaps the proxy settings are locked down?

It works well in my personal laptop.

But What to do if the proxy settings are locked down? and i don't have the admin rights of my office laptop. Thank you

skwire · « **Reply #43 on:** June 30, 2018, 02:13 AM »

Quote from: Ianeskiii on June 30, 2018, 01:44 AM

But What to do if the proxy settings are locked down? and i don't have the admin rights of my office laptop. Thank you

There is nothing I can do about that.

greg_salmon · « **Reply #44 on:** April 20, 2020, 01:04 PM »

This is a beautiful solution. I was so excited to finally have an elegant way to toggle this setting. In my case, I must toggle it on/off several times a day, so having something that can do that and have a visual indicator of its status...incredible.

However, it does not work for me because it's actually the checkbox right above this one that I need toggled.

That is: Use automatic configuration script

As it stands now, in addition to this program not being able to toggle that checkbox, it clears the accompanying "Address" text. Any thoughts on adding a feature so that the user can choose which of these textboxes to toggle? Is there any reason it wouldn't be plausible?

Thanks so much!

RedDark · « **Reply #45 on:** September 20, 2022, 09:39 AM »

some programs, if vpn is enabled, reset the proxy settings. after switching off, I click turn on the proxy, the program turns on, but in fact the proxy is not configured, there is only port 80 without an address and I don't know about it, the proxy looks like it works for me. Is it possible to add to this program so that it checks if there is my proxy setting or is it empty?