ATTENTION: You are viewing a page formatted for mobile devices; to view the full web page, click HERE.

Main Area and Open Discussion > Living Room

Custom dice for board games, etc.

<< < (6/6)

Deozaan:
Found a 1/2 square hole punch on eBay: http://www.ebay.com/itm/1-1-2-INCH-EK-SUCCESS-SQUARE-PAPER-HOLE-PUNCH-SCRAPBOOK-CARD-MAKING-/162055616560?hash=item25bb447830:g:1agAAOSwsN9W~gdk

True 15mm would be 19/32 or 15.0815mm which might still run afoul of the rounded edges. 1/2 inch is 12.7mm which might not be too bad, and is a "standard" size to can potentially be found as apposed to cu$tom made..
-Stoic Joker (May 07, 2016, 08:09 AM)
--- End quote ---

That particular one is 1.5 inches. :)

But yeah, I came to a similar conclusion myself this morning and decided to try a 0.5 inch hole punch. I'm pretty sure I saw one at a local craft shop in my search last week, and with rounded corners, so I'll be checking that out soon.

That said, after making some test printouts at various sizes, I personally felt 15mm was "perfect" (despite my imperfect trimming with the scissors) and that 14mm would also be sufficient, but 13mm leaves a fairly significant border around all sides of the images. I hadn't done the math yet to figure out that 0.5 inches is 12.7mm. That might be a bit too small for my liking, but you gotta do what you gotta do. . .

The alternative is to cut them all out by hand, and I'm not really looking forward to doing that with 180 or more of them.

Deozaan:
I just found this 9/16" (0.5625" or ~14.3mm) punch, which might be suitable.

Seems like I'm going to spend more money trying to find the right punch than on the rest of the project combined. :(

EDIT: I ordered it. If this doesn't work out, I guess I'll be doing it manually with a paper cutter and scissors.

Deozaan:
Well, it arrived today. Sort of. I actually received a 16mm punch instead of the one I ordered, so now I have to send it back.

Now the project is delayed for another week or two.

MilesAhead:
Well, it arrived today. Sort of. I actually received a 16mm punch instead of the one I ordered, so now I have to send it back.

Now the project is delayed for another week or two.
-Deozaan (May 13, 2016, 11:46 PM)
--- End quote ---

I hate it when that happens.  "We don't have that one is stock.  Send the next closest thing.  They'll never know the difference."  Customer contempt mode.

Navigation

[0] Message Index

[*] Previous page

Go to full version