Messages

3726

General Software Discussion / Re: Alternatives to Ditto

« on: June 27, 2010, 03:21 AM »

Ditto has always go well in a singles computer under xp. Under 7 don't go, but i'll wait years to go in 7 because i have much software. Why change is function ?.

Thank ha14

Best Regards

3727

General Software Discussion / Re: Alternatives to Ditto

« on: June 26, 2010, 07:42 PM »

I think sanvient don't have the same shortkeys than ditto.
ufff. It's very difficult obtain a program better than ditto.

3728

General Software Discussion / Re: Alternatives to Ditto

« on: June 26, 2010, 07:40 PM »

Hi Contro

According to the softmaker  textBEAST woks well on Network
Here is the site an if you like it there is a special offer on June 27

http://www.asbware.com/

-ha14 (June 26, 2010, 03:22 PM)

I use Phrase Express in local mode and have specific utilities for format text automation.
I don't the shortkeys CTRL+1 to 0

Only 20 clips from the clipboard. With ditto i can configure. At the present moment I use 500.
With Phrase Express there is no limitation.

Or perhaps i have don't understand well because has unlimited clips too :

What's special about textBEAST?

    * Unlike other clipboard managers, textBEAST can not only store an endless number of clips, but it can also very rapidly access these stored items so they can be pasted quickly. You can organize your clips into meaningful groups with your own custom names, allowing you to navigate very quickly to the clips you need. This makes textBEAST extremely well-suited for  boilerplate text used in letters, emails, and reports. This is much faster than performing a search for needed items, and much easier than having to remember "autotext" shortcut commands.
    * In addition to its function as a clipboard manager, textBEAST can also be used for document automation, and is used in this manner by a number of our current clients in the legal and medical professions.
    * Navigation buttons are customized by typing directly onto them.
    * Unlike "clipboard extenders" that keep everything that passes through the Windows clipboard, textBEAST copies only what you want, avoiding unnecessary clutter, but also keeps the last 20 items that passed through the Windows clipboard in the "auto clipboard".

I have no clear.

I have found this :
http://www.deepskybl...oftware/sanvient/en/

TextBeast share clips on the net ?

3729

General Software Discussion / Re: Shortcut Creator

« on: June 26, 2010, 07:23 PM »

Today I have made intensive proofs. Specially with the option CTRL+SHIFT+W with no problem at all.
 

3730

General Software Discussion / Re: Alternatives to Ditto

« on: June 25, 2010, 07:28 PM »

Please . Do you know more alternatives to Ditto ?

Best Regards

3731

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 07:10 PM »

Ejem. I have to revise the "Mostrar la ruta completa en la barra de título"   in the new pc.


Edited : proofs good. Tomorrow I will revise all my behaviour and inform you.
Good night

Name folder type : 30.03.2007-fotos you have resolved.
At the present moment all good.

3732

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 07:00 PM »

with the option in the explorer windows don't go well and copy nothing to the destination when one or more folders are selected.

-Contro (June 25, 2010, 06:27 PM)

Please let me know if this still happens with the latest version.  I did not succeed in reproducing this problem.

-ewemoa (June 25, 2010, 06:55 PM)

Okis. Now I try in two pc. Strangely in one goes well and the other no. I try with the new version and comment.
 

3733

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 06:58 PM »

I have to revise my three pc in deep.
In the most new one the option in windows explorer don't go well. I don't know why.
I must revise the answer you don't understand.

3734

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 06:27 PM »

With the shortkey ^+s we can copy soft links to the desktop but if the initial name is 29.03.2007 Libros Matemáticas finally convert to 29.03.

but with the option in the explorer windows don't go well and copy nothing to the destination when one or more folders are selected.

3735

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 06:23 PM »

All this time i have problem with the folders with names 0135.10 , 127.09 and similars. The script propose only 135 or 127 for the shortcut name.
I change to my other pc to make new experiments.
My books inventory from year 2007 don't go well when several folders are selected to go to the destiny folder.
 

3736

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 02:16 PM »

Ejem. I am going to a couple of hours of CreateShortCutsIn before inform you.

Best Regards

 

3737

General Software Discussion / Re: Shortcut Creator

« on: June 25, 2010, 02:03 PM »

Ouwwww. I see the ini is not useful in this case and don't say what directories has special cirscuntances. In windows 7 I think there is a unicity in all languages, but in xp no.
So we need this table to know the correspondences
I supposed the only problem is the My Documents and similar folders.

That's :

My Documents  ­ ­ = Mis Documentos
The other ones give correct path ( I think) in the title folder
My Images = Mis Imágenes    ------ >  M:\Documents and Settings\JOSE\Mis documentos\Mis imágenes
My Music = Mi música          ------- >  M:\Documents and Settings\JOSE\Mis documentos\Mi música
My Videos = Mis Vídeos       -------- etc etc

I am making proofs and obtain good results with Mis documentos folder

 

One of the littles bug I remember is when I repeat create shortcuts over same folders. Now I am not obtaining warnings....

3738

General Software Discussion / Re: multilink over a photo taken by us

« on: June 25, 2010, 12:52 PM »

I don't understand. I supposed I have to create the table and linking cells and put the image over. But don't work.

What do you mean with behind the table to get the purpose ?

Best Regards.

3739

Post New Requests Here / Window replacement memory

« on: June 25, 2010, 12:47 PM »

In word 2002 when I select a text to replace when I began to write all the old text is gone and sometimes my memory is not good and I would like to have the old text in an auxliary window i can adapt to see the old text.

In this snack may be :

1) crystal window configurable
2) a hotkey to activate the auxiliary window after select the text that may be the DEL key pressed after the text selection. And the out key (ESC o ENTER) .

In notepad++ is possible to select a text and with CTRL+H proceed to replace with the original text under control.
I have tried with word 2002 with no result.

Best Regards

3740

General Software Discussion / Re: Monitor the size of files

« on: June 24, 2010, 06:48 PM »

The interesting point from monitoring the files is a top value to alarm.
 

3741

General Software Discussion / Re: Monitor the size of files

« on: June 24, 2010, 06:46 PM »

How about something like this:
 (see attachment in previous post)
You can drag-n-drop or use the toolbar buttons to create any number of lists of files that can be saved.  The refresh button on the toolbar reads through the list and updates the file sizes.  Was this what you had in mind?

-skwire (June 21, 2010, 02:37 AM)

Oh sorry. I am here i am here. I haver problems with the update to version 3 of thunderbird. I am missing important messages I try to revise in the webmail.

That screen is perfect for anyone. Drag and drop the file to control is perfect.

Best Regards

3742

General Software Discussion / Re: Alternatives to Ditto

« on: June 24, 2010, 06:23 PM »

Not quite as you want - ArsClip, which is both free and portable, has a single hotkey, Control-Shift-Z by default, that pops up a list of clips where each clip is numbered and has the icon of the program it was clipped from.  Entering the number pastes the clip.

[Edit]
If you Enable the Tooltip Popup in Configuration, you can move up and down the clip list with Ctrl-Shift-X and Ctrl-Shift-C (again by default), pasting the clip you want, when you get to it, by pressing Shift on its own.  But, that's getting a fair way away from the method I understand you to use now with Ditto.
[/Edit]

-rjbull (June 24, 2010, 04:01 PM)

I don't see function to send clips from one terminal to the other and don't have ten short key : CTRL+1 , CTRL+2, etc to paste ten clips.

 

3743

General Software Discussion / Re: Alternatives to Ditto

« on: June 24, 2010, 05:52 PM »

ac'tivAid has an extension ("MultiClipboard") which does that.

-Tuxman (June 24, 2010, 01:50 PM)

I try and comment
 

Note : Ditto saves un unlimited number of clips. And send clips between the terminal in the local area network.
Note : The keys combination CTRL+1 to CTRL+0 don't go well. Are different the numbers from the numpad that from the keyboard and don't go well because when I put WINDOWS+SHIFT+2 (number from the keyboard alfa numeric appear " )

3744

General Software Discussion / Re: Alternatives to Ditto

« on: June 24, 2010, 05:48 PM »

Hi
Try Global Clipboard, possible someone can help to make it portable
http://www.techishar...l-clipboard-manager/

-ha14 (June 24, 2010, 12:15 PM)

I try and comment.
Best Regards

Send clips in the local area network ?

3745

General Software Discussion / Re: multilink over a photo taken by us

« on: June 24, 2010, 05:45 PM »

if you're doing it in word there is no requirement to chop up the image, simply send it to the rear, ie behind the table

you can resize it to fit using the handles

-Target (June 24, 2010, 05:29 PM)

 

3746

General Software Discussion / Re: multilink over a photo taken by us

« on: June 24, 2010, 01:46 PM »

With Fast Size Resizer Portable no line

3747

General Software Discussion / Re: multilink over a photo taken by us

« on: June 24, 2010, 01:31 PM »

By an unknown reason there is a unexpected line..... But that is another story.....

3748

General Software Discussion / Re: multilink over a photo taken by us

« on: June 24, 2010, 01:26 PM »

Now. I would like a launcher I can adopt to put this image inside and launch the photo menu....

3749

General Software Discussion / Re: multilink over a photo taken by us

« on: June 24, 2010, 01:24 PM »

Ouwwwww
There is not necessary the table.
With Xnview i reduced the size of the picture.

And drag and drop directly in word one by side of another. It's fast and after we can put hyperlinks

3750

General Software Discussion / Re: multilink over a photo taken by us

« on: June 24, 2010, 01:06 PM »

With word I prefer a headache. I have to addapt any pieces and word 2002 is not very easy for this purpose. Perhaps better coreldraw.
Or perhaps I need a program to reduce the size of the photos to adapt more easy to the word table cells.