« on: May 07, 2018, 09:43 AM »
Should be resolved now. Updated version is available from https://bvckup2.com/get
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Very interesting utility, could be handy for quick reads on a server where diskperf counters are off by default.-Stoic Joker (April 12, 2018, 07:07 AM)
Drive letter selection would be nice to have for that even if it's only a command line option.
My optimizer program ran for 5+ hours in its search for the best assignment of prizes to maximize happiness.-mouser (April 11, 2018, 07:55 AM)
ps. this qualifies as a NANY release (https://www.donationcoder.com/forum/index.php?topic=44276.0)-mouser (October 02, 2017, 07:05 AM)
Everything failed during/after the test. Share settings didn't change, ACL on files/folder didn't change, yet it wasn't possible to write anything anymore.-Shades (January 21, 2017, 11:39 PM)
Must say that the software looks great and is responsive.
Still, that doesn't remedy the fact regarding the boring results my system is capable of generating, so I won't bore you with those.
Screenshots don't seem to work very well on my Windows 10 system:-Deozaan (January 22, 2017, 12:17 AM)
wondering if you still considering this idea?-tomos (December 14, 2016, 04:52 AM)
Drive shows as an SSD, but Vendor, Health, Temperature, and SMART Data are all blank, and serial number is all zeros.-Stoic Joker (April 02, 2016, 07:33 AM)
Did I forget to mention I created a Restore point before reinstalling the drivers-4wd (March 31, 2016, 10:51 PM)
BTW, "Diskovery has stopped working" if it has no internet connectivity to send the report.
Never mind, I thought I'd reinstall the drivers for the motherboard and guess what ... now it also says USB 3.0-4wd (March 31, 2016, 06:59 AM)
Had a chance to try it now, really nice work (as usual ).-Jibz (March 31, 2016, 01:03 AM)
One thing I noticed; Under Logical volumes there are my usual drives, and one listed as just [Serial]. When I click it, there is no information about what this volume is used for as far as I can tell.
But if I click the physical storage device it is on, and expand the partition table, it says "Windows RE (Recovery Environment)" under Type. I think this information would be helpful in the page for the Logical volume.
It's identifying a PNY flash drive as USB 3.0 but saying it's in mode USB 1.1 - (currently writing to it at >18MB/s).
Addendum: This looks like it might be controller related - two different USB 3.0 Host controllers on my computer:
Onboard ASMedia controller using latest ASMedia driver shows USB 1.1.
PCIe Renesas controller using Microsoft Windows 10 drivers shows as USB 3.0.-4wd (March 30, 2016, 08:59 PM)
Sent log from within the program...I hope it went where it was supposed to..-Stoic Joker (March 30, 2016, 03:04 PM)