DonationCoder.com Software > Mouser's Zone
MiniCap Printer
(1/1)
carlo133:
Hi, I still using your beatiful MiniCap software to capture and print the PC screenshot by using the commandline commands.
Everything works properly, but there is one thing that I do not understand: the printouts images on paper are smaller than the printout images obtained with the standard Print Screen command.
In the MiniCap -printpreview the defaults sets for the print margin is 1 inch.
Is there a way to set a lower margin value ad default, (close to zero), via commandline or by any ini command?
Thanks, Carlo.
mouser:
Let me see if i can add an easy option to set margins.
mouser:
Done, will be in next release.
carlo133:
Tnks! I Will test it! :D
mouser:
Ok please test the most recent beta:
https://www.donationcoder.com/Software/Mouser/MiniCap/downloads/beta/MiniCapSetup.exe
or https://www.donationcoder.com/Software/Mouser/MiniCap/downloads/beta/MiniCapPortable.zip
Use the new printmargin option like:
-printmargin 0
use a value in 10ths of an inch, so "-printmargin 10" for a 1-inch margin.
Navigation
[0] Message Index
Go to full version