Main Area and Open Discussion > Living Room

Bluetooth PAN Network Adapter driver.

(1/2) > >>

BCHOWDHURY:
I know this is the wrong place to start this thread but I don't have any choice.
1) Bluetooth PAN Network Adapter shows a red cross mark and no matter, which bluetooth driver I install, it stays the same, with a cross mark. It shows whatever driver I install in driver details but it never gets activated. Please, help me.
2) Can I use two internet connections, broadband and GPRS/EDGE simultaneously on my Windows Server 2003? How? Can I do that on WinXP Pro? Do I need any special software? Please, help me.

40hz:
Re: #2

If those NICs are using public IP addresses and this server is your DC, the short answer is you can't. You also never want to multihome a DC because it causes major problems for your network.

This question comes up a lot. Rather than me blathering, take a look at this link. It shows a way to work around this problem.

http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/1fe33392-c086-41b2-9477-27ab158d3932

Luck! :Thmbsup:

4wd:
Re: #1

What's the Hardware ID ?

Device Properties->Details->Hardware Ids

eg. Mine reports: {f12d3cf8-b11d-457e-8641-be2af2d6d204} which is IVT Corp. hardware which uses their BlueSoleil driver.

BCHOWDHURY:
Hardware IDs:
USB\Vid_0a5c&Pid_2100&Rev_0112
USB\Vid_0a5c&Pid_2100

4wd:
Broadcom Corporation / MICRO SYSTEMS, INC.                                 ES-388
Broadcom Corporation / ShenZhen Kang Hui Technology Co.,ltd           BCM2045a

Try Bluetooth Driver Installer.

Navigation

[0] Message Index

[#] Next page