Main Area and Open Discussion > General Software Discussion
Code 19 in Device Manager
(1/1)
Charleybriz:
I have XP Pro (SP2) OS on a Dell XPS 600. Without ANY new hardware/software installs/upgrades my Dell All-in-one Photo 964 printer decided not to print anymore. I can copy, but not print, including test pages of course. In Device Manager (see attached pic's) under imaging devices I had the yellow exclamation point and the reason given as Code 19, Registry corrupted, blah, blah. But the Printer was not flagged. I ran Registry Fix to no avail. Tried to go back to a prior registry backup point(s), a prior restore point(s), uninstall drivers/reinstall drivers, uninstall & reinstall printer software, all to no avail. In Microsoft's database code 19 is dealing with filters listed for cd/dvd drives. Before I drop kick this thing and reinstall the the OS and start over any body have any cool knowledge out there. I have some basic reasoning brain drain ability with PC's but need help with this please. I hate to take the time to reformat and install all the crap I have on here. Any further info you may need please ask also. Thank you very much.
cranioscopical:
I can't help, but have you tried talking to Dell?
You might be lucky and find someone there who's come across this issue before.
If you're in the U.S., call 1-800-624-9896 (according to the Dell printer manual)
Good luck with the issue, I feel your pain!
J-Mac:
Did you uninstall the printer and all associated software, then reinstall? Worth a try!
Jim
justice:
C:\temp\err>err 19
# for decimal 19 / hex 0x13 :
BTH_ERROR_REMOTE_USER_ENDED_CONNECTION bthdef.h
EMPTY_THREAD_REAPER_LIST bugcodes.h
EVENT_MSCEP_FAIL_TO_GET_CERT_FROM_NUMBER ceplog.mc
# SCEP Add-on cannot find a valid certificate based on the
# serial number in the client's PKCS7 message (%2). %3
# Please find support information at
# http://%1/certsrv/mscep/mscephlp.htm.
MSG_E_REG_BAD_SUBJECT_TEMPLATE certlog.mc
# Certificate Services did not start: The Subject Name
# Template string in the registry value
# HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\%1\
SubjectTemplate
# is invalid. An example of a valid string is:
# CommonName
# OrganizationalUnit
# Organization
# Locality
# State
# Country
CR_FAILURE cfgmgr32.h
LOG_MODULE_NETNAME clusvmsg.h
LLC_STATUS_INVALID_LOG_ID dlcapi.h
HIDP_GETCOLDESC_REPORT_ID hidpddi.h
IAAPI_BADTGINDX iaapi.h
# /* Bad tag number index into encoded value */
MD_ERROR_SUB403_INSUFFICIENT_PRIVILEGE_FOR_CGI iiscnfg.h
MD_ERROR_SUB500_BAD_METADATA iiscnfg.h
IME_RS_SYSTEMMODAL ime.h
# called when system mode
KDC_ERR_SERVICE_REVOKED kerberr.h
# Credentials for server have been revoked
POLICY_ERRV_GLOBAL_USER_FLOW_RATE lpmapi.h
MAPI_DIAG_CONVERSION_LOSS_PROHIB mapidefs.h
MMSYSERR_VALNOTFOUND mmsystem.h
MSIDBERROR_BADREGPATH msiquery.h
# bad registry path string
NRC_ILLNN nb30.h
# /* illegal name number */
NDDE_INVALID_WINDOW nddeapi.h
NMERR_OUT_OF_MEMORY netmon.h
ODBC_ERROR_WRITING_SYSINFO_FAILED odbcinst.h
OLE_ERROR_GENERIC, ole.h
# Some general error */
MSG_TEMPLATE_VALIDITY_TOO_LONG pollog.mc
# The certificate validity period will be shorter than the %1
# Certificate Template specifies, because the template
# validity period is longer than the maximum certificate
# validity period allowed by the CA. Consider renewing the
# CA certificate, reducing the template validity period, or
# increasing the registry validity period.
SCESTATUS_TRUST_FAIL scesvc.h
GE_SSC_ERR_WRONG_SIZE ssc.h
# /* specified wrong size */
MSG_FILELOG_FAILED w32timemsg.mc
# Logging was requested, but the time service encountered an
# error
# while trying to set up the log file: %1.
# The error was: %2
ERROR_WRITE_PROTECT winerror.h
# The media is write protected.
LDAP_CONSTRAINT_VIOLATION winldap.h
# for hex 0x19 / decimal 25 :
BTH_ERROR_UKNOWN_LMP_PDU bthdef.h
BAD_POOL_HEADER bugcodes.h
EVENT_MSCEP_FAIL_TO_GET_ID ceplog.mc
# SCEP Add-on cannot find a valid certificate request ID
# based on the transaction ID in the client's PKCS7 message
# (%2). %3 Please find support information at
# http://%1/certsrv/mscep/mscephlp.htm.
MSG_DN_CERT_REVOKED certlog.mc
# Certificate Services revoked the certificate for request %1
# for %2.
CR_INVALID_LOAD_TYPE cfgmgr32.h
LOG_MODULE_DHCP clusvmsg.h
LLC_STATUS_INADEQUATE_BUFFERS dlcapi.h
IAAPI_DUPLCOMPVALUE iaapi.h
# /* Duplicate value for one component in a parsing value*/
KDC_ERR_PREAUTH_REQUIRED kerberr.h
# Additional pre-authenticationrequired [40]
POLICY_ERRV_GLOBAL_DEF_PEAK_RATE lpmapi.h
MAPI_DIAG_MULTIPLE_INFO_LOSSES mapidefs.h
MSIDBERROR_BADMAXMINVALUES msiquery.h
# value in MaxValue column of _Validation table is less than
# value in MinValue column
NRC_NAMCONF nb30.h
# /* name conflict detected */
NDDE_INVALID_SPECIAL_COMMAND nddeapi.h
NMERR_LOCK_NESTING_TOO_DEEP netmon.h
OLE_ERROR_NOT_EMPTY, ole.h
# Client doc contains objects. */
MSG_COMPUTE_CLIENT_DIGEST_FAILED w32timemsg.mc
# The time provider NtpClient cannot determine whether the
# response received from %1 has
# a valid signature. The response will be ignored.
# The error was: %2
ERROR_SEEK winerror.h
# The drive cannot locate a specific area or track on the
# disk.
# 46 matches found for "19"
--- End quote ---
These are all windows error messages for cod 19, but none seem to apply to what you are seeing here i think.
ah actuallly you mention the registry, so maybe it's the section in bold. Error codes come from the free downloadable http://Microsoft Exchange Error Code Lookup Tool
Navigation
[0] Message Index
Go to full version