Messages

1

Screenshot Captor / Re: Source & Procedure to download more Clipart Objects?

« on: October 22, 2016, 01:58 PM »

Hello Mouser!

Thanks for your reply & apologies for my delayed acknowledgement. What is wish to ask is -- that does there exist a repository on your Website to download even more Clip-art objects?

Please also refer to the Original post. Do you plan to introduce 'emojis' for Screenshot captor?

2

Screenshot Captor / Re: Source & Procedure to download more Clipart Objects?

« on: June 24, 2016, 02:25 PM »

Hello Mouser!

Iam still awaiting the relevant answers in this regard. Please suggest on how to download 'More' Clipboard Objects to be put to use within SC?

3

Screenshot Captor / Source & Procedure to download more Clipart Objects?

« on: June 23, 2016, 08:16 AM »

Hello Mouser!

Screenshot Captor's Tip indicate that in order to download & use more Clipart Objects, one has to pay a visit to this Site.

So please guide that where exactly are the additional Clipart Objects located & the subsequent procedure to bring those within the ambit of Screenshot captor?

Lastly, Please refer to the enclosed latest development. Do you think the time is ripe to replace Clipart Objects with Emojis? Do you have any plans to integrate the use of Emojis for Screenshot Captor?

Guidance & Inputs will be sincerely appreciated.
Best regards from the National Capital---New Delhi
India.

4

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: July 01, 2014, 08:04 AM »

Hello Mouser!

Won't it be possible for you to index all items listed within the Control panel of Win 8? For instance, if I wish to directly launch "Windows Update" through FARR.....can't that really happen without getting into the complications of , what they acclaim as "God Mode"?

Why not come up with an altogether Latest release of the FARR to disburse all these offerings by default? Why should there be some maneuvers for pretty simple things?

5

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: June 30, 2014, 04:53 AM »

Hello Phitsc!

cpanel alias were not depicting that option. Moreover, don' you think the feature should have been there by default? Please offer an earnest time in enjoying the ongoing World Cup. Thanks.

6

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: June 28, 2014, 01:18 PM »

Dear Wraith808!

Patience is a long forgotten virtue! Don't you observe Smartphones & Tablet Manufacturers endorsing the punch line:::"Those who hate to wait"! :-)

Nevertheless, Please Check out the attached screenshot & it will reveal that why this "Launchy" is still invincible! No more workarounds, No more gimmicks...just type in "Netw".....& comes the desired Outcome there & then!

Both FARR & Launchy depicts "Start-up Impact" on resources as HIGH under Task Manager screen. Hence, it didn't prove to be a trade off worth to remain stick with FARR.

An uneasy access to the "Network Connections" were proving to be a Gr8 Handicap, & thus have decided to become LOYAL to Launchy once again!

See you Next time till you add Godmode for the Next Version of FARR to enable an Index of all listed items within the highly populated Control Panel  of Win 8 OS.

7

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: June 28, 2014, 07:09 AM »

Guys! Please help...! Have all gone into the Snoozing Mode?

8

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: June 27, 2014, 06:38 AM »

Hello Phitsc!

Please have a look on what my Screen shows up when the search string of "cpanel netwo" goes entered into. Please refer to the attached image.

Mr. Josh, will you come up with a new version of FARR that'll take care of the requirements automatically?

Hello Tomos, in the given Hyper-link, Iam confused to an extent that I don't know from where to start & at where to end:-)

At the first place, I don't know what a God Mode is?  Won't it be really simple to Automate this kind of search in an Upcoming version of FARR?

This is what I want to be seen....Refer to the 2nd Screenshot. "Launchy" does that without any hassles!

9

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: June 25, 2014, 06:41 AM »

Hello to all again!

To Phitsc::: Typing cpanel, though lists the Control Panel associated options. However,  invoking "View Network Connections" still remain a distant dream.

To AnandCoral:::What you have highlighted depicts "My Network" places, & it cannot be a substitute to list of Network Connections. It is altogether a different option.

To Tomos::: You seem to have approached nearest to my requirement. I wish to understand in detail, how did you accomplish the same!?

However, without any of the complex maneuvers Launchy do invoke the desired screen as it used to form a Core entry within the Start-Menu with the earlier versions of Windows OS. This Win 8 goes bereft of Start Menu, & hence Launch Utilities assumed the need of the hour.

What I really want is that FARR should Index every item listed under Control panel. So suppose, if I need to Update Windows....I should be able to invoke its Screen at the first go, by typing a string::: Win Update. That's My requirement. 

10

Find And Run Robot / Re: Missing out on the Control Panel Items, Launchy didn't

« on: June 24, 2014, 01:29 AM »

Please reply to the above mentioned post!?

11

Find And Run Robot / Missing out on the Control Panel Items, Launchy didn't

« on: June 23, 2014, 02:55 AM »

Hello Folks! 

Have just made a transition to latest version of FARR from my much revered Launchy. Iam on Win 8 Desktop PC. Typing "Network Connections" should invoke the "View Network Connections" automatically similar to what used to be the case with Launchy. However, FARR is making me do the marathon to scour the route to exisiting Network Connections by first invoking the Control Panel screen, & thus searching my way out for "View Network Connections"!?

I would request you to teach me a Trick in order to index(or whatever technology FARR uses) the all items present within Control Panel. Iam using "Bridge Mode" for the Network Connectivity, & hence have to manually click on connect for the respective Network Connection.

All help will be sincerely appreciated.
Regards from National Capital----New Delhi
India.

12

General Software Discussion / No "Remember Pwd." Setting with Seamonkey Mail, Version 2.20!?

« on: August 27, 2013, 01:48 PM »

Hello Folks! Using Seamonkey Navigator version 2.20 for Mac OSX!

'Mail & Newsgroup' Window prompts to enter a Password each time, without offering an Option to Remember it against any further access attempt!

Similarly, sending a Mail is turning out to be PAIN too, for I have to Punch in the Pwd. everytime, without making it Remember for any similar instance!?

Have scoured through 'Account Settings', as well as 'Preferences' , but couldn't find anything significant!

All Help will be sincerely appreciated.....!

Please 'Pool in' the suggestions...

13

General Software Discussion / Re: Is there anything such as 'Scheduler' Application?

« on: August 01, 2013, 10:51 AM »

Dear All!

Thank you very much for the Valuable Inputs! I appreciate!

However, Can anybody demystify the LOGIC of not enabling an 'Auto Shutdown' with AntiMalware Scanners? 'Complete System Scan' should be backed with an Auto Shutdown capability once the Process goes completed & found threats being 'Automatically' Quarantined!...What's the Harm with that!?

Afterall, any kind of a 'Full System Scan' does take around 30-45 mins. to get Completed. On the Contrary, most 'Filthy' of Fragmentation hardly consumes just about 20 Mins. to get "Optimized"! Free Defrag Tools BOASTS of enabling an Auto Shutdown for a User, whereas, one has to randomly Check the Status of a Malware Scan at sporadic Intervals...!

What a Pity....!

14

General Software Discussion / Is there anything such as 'Scheduler' Application?

« on: July 30, 2013, 10:47 AM »

Hello There!

Wonder..Most of the Defrag tools do have an Inbuilt Scheduler that allows one to set  'SHUTDOWN the PC', once the Defrag, or Full Optimization goes Completed!

On the contrary, most of the FREE 'On Demand Virus Scanners'(not aware of the PAID Ones,& considering the time elapse it requires for a FULL System Scan) do not host such a flexibility!!??

Why can't one simply leave the Office by merely Turning OFF the Monitor, & scheduling all such Tasks to be completed in 'Automated' fashion, without getting bothered about a Left ON PC?

For instance, is there a 'Scheduler' concept that can enable me to set 'Complete System Scans' through Super Antispyware, then Malwarebytes Antimalware, & finally a 'Full Disk Optimization' through an Ultra Defrag which will eventually lead to System being SHUT DOWN at the end? 

This kind of a Complete overhaul on a weekly basis can certainly make my Day through a quick touch-up for my Machine!

Inputs will be sincerely appreciated.
Regards from India.

15

General Software Discussion / Re: Any Screenshot Captor's Contemporary at MAC Platform?

« on: July 30, 2013, 10:27 AM »

Thank You so much x16wda!

I have been able to shortlist Monosnap that still runs of MAC OSX 10.6.8! It is just the bare minimum in comparison to the 'Legend' Screenshot Captor!
But, will be able to serve the purpose.

16

General Software Discussion / Any Screenshot Captor's Contemporary at MAC Platform?

« on: July 21, 2013, 05:19 AM »

Hello There!

Iam eager to find out an 'Analogous' to Screenshot Captor at MAC OS X Platform? Please help 'Pool-in' the available Options.
Though MAC OS X has an in-built "Grabber" functionality, it some how lacks the bare minimum requirements such Annotation, editing...etc.

I wanna have a 'Freeware' Utility similar to Screenshot Captor's Genius within my MAC OS X{10.6.8}.

Suggestions will be sincerely appreciated.

17

Screenshot Captor / What about the "Horizontal" Capture!?

« on: February 20, 2013, 11:59 AM »

Hello Mouser!

In context to the 'Scrolling Screen' Capture, we generally presume it to be a "Vertical" scroll!

But what if we need to capture the "Horizontal" scroll?, or even a "Combination" of the two?

Is your offering(or any Product available out there...) capable of serving the purpose?

Frankly, when it comes to a "Vertical" scroll, I hadn't find a single software to match the Capabilities, ease & convenience offered by "Duck Capture".

Good Old piece of Software dated back to Year 2005 offers an unparalleled & an invincible promise.

18

Screenshot Captor / Re: Where are the common shapes Please?

« on: February 01, 2013, 03:40 AM »

Hello Tomos!

Apropos of the above response, please let me know on how to choose a "Transparent" Background while drawing any of the common shapes?

Surprisingly, any drawn shape renders a "Yellow" background by default!? Mouser should have configured this Software to render a "Transparent" background instead.

19

Screenshot Captor / Where are the common shapes Please?

« on: January 28, 2013, 10:24 AM »

Hello Mouser!

As I have started exploring yours offering again & again, Iam trying to figure out ways to draw common shapes within the Captured Screenshot like Rectangle, Circle, Eclipse..etc.

In my full understanding there do not appears any button with the Right Side panel to fulfill the very objective!

Help decipher the method to draw some common shapes within the Captured screenshot.

20

Screenshot Captor / Re: Down-Down with "Paste from Clipboard Option"!

« on: January 26, 2013, 06:14 AM »

Thanks Mouser..for all yours perseverance to this matter. :Thmbsup:However, Please do make sure to offer the "Copy to Clipboard", a straightforward access in the form of an 'Exclusive' Button towards the Right side panel.

A mere press to that Button would automatically make an exit of the "Captured Image" from the Object Mode, & will facilitate a 'No frills' method for the very objective.

I wait desperately to see that 'coming in' for any further release of Captor....Please!

21

Screenshot Captor / Re: Down-Down with "Paste from Clipboard Option"!

« on: January 26, 2013, 03:18 AM »

Hello Mouser!

Yes I was trying to accomplish the first option as quoted by you. But then, I have just tried that "File Menu" based option, & now it seems to work perfectly!

Iam OK with that as well. Earlier I was expecting that a mere  Ctrl+V against the 'Grey Background' based Screen would do wonders for me!

Its now that I have realized that even with "Pic Pic" you would first create a Blank Image & then press Ctrl+V to see the desired Outcome :-)

But then.....what 'Corollary" does "Paste Clipboard Image/Object as New object(Ctrl+V)" within Edit Menu draw in relevance to your Program?

What is its Significance?

22

Screenshot Captor / Re: Down-Down with "Paste from Clipboard Option"!

« on: January 26, 2013, 02:06 AM »

Hello Mouser!

Iam putting up an image to the Clipboard using an alternate Screenshot Application's>>>COPY to Clipboard Option!

In rest of the Programs, "Copy to Clipboard" is quite a handy feature, & comes with an "Instant" access!

Using this method, Iam able to PASTE the Captured Image on to all applications(like MS Word,MS Outlook, Jarte...etc.) but Screenshot Captor!?

Every attempt renders a sudden activation of just "Clipart objects" section.

Lastly, also address the "Tabbed based Capture" of Multiple Screenshots at a single go...!

23

Screenshot Captor / Down-Down with "Paste from Clipboard Option"!

« on: January 26, 2013, 01:19 AM »

Hello Mouser!

Tried a couple of times to PASTE the Image "from" Clipboard using the Edit menu as well as Ctrl+V option, but to no avail!

Every attempt to do so only activates the "Clipart Objects" section, & nothing more than that!?

I wonder if the very option, or that feature goes infested with a "Software" Bug!?

Also, Why should the user be restricted to work over a "Single Screenshot" at a time!? Why can't I simply take more than one screenshots at a single go; & later work over each tab by tab!?

Both Pic Pic & Greenshot(My Darling!) hosts such a flexibility!....then why couldn't it be with your boastful offering!?

Regards from India...
Saurabh Dua.

24

Screenshot Captor / Feature Request::'My Favorites' Panel for ClipArt Objects.

« on: January 12, 2013, 09:20 AM »

Hello folks!

They are in a plenty! However, we do manage to use only a few of these on a regular basis.

Therefore, I would request introducing a 'My Favorites' panel to host & thus easily select & use the 'Preferred' Clip Art objects.

Also, I dearly MISS the "Copy to Clipboard' option in the right hand panel that hosts no. of other preferences like Save, Frames, Borders..etc.

"Copy to Clipboard" should have been offered a 'No frills' access from the very beginning itself!

At present, we have to press ESCAPE a multiple times before punching in Ctrl C, OR move a Mouse over an "Edit" Menu to finally select a 'Confusion driven'>>Copy object to Clipboard !?

25

Screenshot Captor / Re: Has the time arrived for the 'Animated' Screenshots?

« on: December 02, 2012, 01:46 AM »

My Dear Friends!

Thank you so very much for such an overwhelming Support to introduce such a feature type for Screenshot Captor capabilities!

Yes, I do work for a Power Utility that does require a 'Knee jerk' operation sometimes to get the Consumer's purpose accomplished through the lackadaisical approach  from my other colleagues & fellow officers!

One ought to be innovative these days to 'Catch an eye' amidst a huge pile-up/back log of cases; & therefore 'Animated screenshots' or GIF Creations could do wonders to a 'Case follow-up' experience!

Compliments from India...(Probably the 'Most Corrupt' country on the Planet..!)