Messages

1

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: April 02, 2015, 01:24 AM »

Stops scrolling at 53 down.

2.) When scrolling in Series tab scroll locks/stops cannot continue past Marvels Agents of Shield.
Currently I just reverse alphabetization and continue from other end of alphabet to Marvels Agents of Shield.

So EpCheck Stops scrolling at 53 down for me that is at Marvels Agents of Shield.
EpCheck Version 1.1.5.1  on XP SP3

2

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: March 26, 2015, 01:53 AM »

Just my 2 cents

Feature Request:
In Series Tab
Please Color code Series Titles by status,
IE Ended/Continuing, or No status result (so three colors.)

Just sounds a little different from the other request. (Some series have no status.)

3

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: March 16, 2015, 02:46 AM »

2 Problems?

1.) Artifacts in Series tab view from status notifications at bottom when scrolling.
EpCheck Version 1.1.5.1  on XP SP3
(Probably best to avoid scrolling the tab when notifications occur.)


2.) When scrolling in Series tab scroll locks/stops cannot continue past Marvels Agents of Shield.
Currently I just reverse alphabetization and continue from other end of alphabet to Marvels Agents of Shield.

Thanks for EpCheck

4

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: March 16, 2015, 02:08 AM »

Just updated to latest stable release and it keeps getting better,
Thanks Jodi

Feature Request:
In Series Tab
Please Color code Series Titles by status,
IE Ended/Continuing or no status result (so three colors.)
The reason ease of use.
Because the steps getting to Status include:
1.) clicking Series Tab, 2.) clicking individual series title, 3.) waiting for display. (Rather fast enough with a few shows to check but with 100 or so it is a bit slow to check all.)

5

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: April 15, 2014, 12:44 PM »

1.1.3 build 49 on XP

Show Special Episodes is unchecked.
Orphan Black is showing s00e03 Airdate 4/12/14 (3 days ago on today 4/15/14 to reproduce)
Title = The Cloneversation Overview = Aftershow hosted by Will Wheaton

(This is likely an error with the website entry.)

Also in Build 49 format S01E01 is still showing as s01e01
Several attempts to set it to S01E01 work until shutdown, then display resets to s01e01

Settings below.

LastRefresh=20140414230731
ServerTime=1397530674
AutoScroll=1
MoveThe=1
NumDaysAhead=14
NumDaysBehind=3
ColWidthsSeries=190,0
ColOrderSeries=2,1
ColWidthsEps=26,0,0,0,0,0,0,39,100,0,121,112,79,55,84
ColOrderEps=2,3,4,5,6,10,7,1,8,9,11,12,13,14,15
ColWidthsWeekly=0,0,0,0,0,0,534,0,52,131,99,61,53,51,40
ColOrderWeekly=2,3,4,5,6,8,1,10,9,11,12,13,14,15,7
HSepPos=347
VSepPos=396
ColorYesterday=0xff0000
ColorToday=0x00ff00
ColorTomorrow=0x0000ff
GroupBySeason=1
LoadWeekly=1
EpDisplayFormat=S01E01
StartupTab=Weekly
RefreshDays=7
NewListReset=0
NumBannerImages=Up to 1
ShowSpecials=0
ListFontFace=
ListFontStyle=
SelProfile=MyShows
[Position]
x=1
y=1
w=1022
h=562

6

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: March 26, 2014, 09:52 PM »

Great work on V1.1.3 lots of excellent features it just keeps getting better.

Looking forward to the network and airtime data being added (mentioned recently).

Appreciate the gif showing how to un-hide the overview column in weekly view tab.

Re: Search tab options. Add and sorting by columns seem to be the limit of functionality.
Please consider porting the "Web Search" option found in series tab, and weekly tab to search tab results.

Hopefully this is not user error but sorting option S01E01 does not save for me.

7

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: January 07, 2014, 01:38 AM »

It is working now must be user error.

8

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: January 06, 2014, 06:47 PM »

Done again still no joy with opening with weekly view.
my config contains the following
[Settings]
AOT=0
LastRefresh=20140106185735
ServerTime=1389052148
AutoScroll=1
MoveThe=1
NumDaysAhead=14
NumDaysBehind=2
ColWidthsSeries=190,0
ColOrderSeries=2,1
ColWidthsEps=0,0,0,0,0,0,33,100,200,123
ColOrderEps=1,2,3,4,5,6,7,8,9,10
ColWidthsWeekly=0,0,0,0,0,0,22,130,80,208,80
ColOrderWeekly=1,2,3,4,5,6,7,8,9,10,11
HSepPos=359
VSepPos=396
ColorYesterday=0xff0000
ColorToday=0x00ff00
ColorTomorrow=0x0000ff
GroupBySeason=0
LoadWeekly=1
[Position]
x=-4
y=-4
w=1032
h=574

9

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: January 06, 2014, 05:49 PM »

re 5 the option worked fine though with version 1.03 it took a while and a restart of the program to display anything I believe it crashed.

Re 3 This has never worked and unchecking and rechecking etc it never worked for me.

10

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: January 06, 2014, 05:24 PM »

Re 5 yes and the change worked, it was just a thought regarding the default.

Re 3 yes and the change never worked it always opens in the Series Tab for me.

Started with version 1.03, upgraded today to 1.06 build 1.
Running currently on xp from a flash drive.

After the option failed I assumed it related to updating the Weekly tab on start not showing it.

Several retests since including version 1.06 build 1 and option fails to show weekly tab on start.

11

N.A.N.Y. 2014 / Re: NANY 2014 Release - epCheck

« on: January 06, 2014, 05:10 PM »

I Love EpCheck as it is but have a few suggestions.
 
1)The  website TVDB.COM mentions the Air Day, Air Time, Network on the first page for each series example = TVDB.COM Almost Human This data could be retrieved and displayed hopefully in the Weekly Tab and in the Series Tab. The second Column in the Weekly tab appears to be unused and could hold the data Air Day, Air Time, Network, of course the Weekly Tab only needs Air Time, and Network. The area just after the Air Date column is blank space/ empty column.

2) Series Tab could highlight current episode, or similar to Weekly Tab it could highlight Past, Present, & Future thus all previous episodes, seasons could be ignored since all would be red.

3) Currently EpCheck opens in the Series Tab, an option to open in the Weekly Tab would be great.

4) Minimize until update complete would also be a great option, as would start Minimized.

5) Default color code could change to RED = Past Green = Today Blue = Future this follows the light spectrum roughly, and green = go of course. (I have changed using options already, just a thought.)

Thank you for your wonderful software.

12

Post New Requests Here / PlayDead

« on: April 14, 2011, 09:57 AM »

I sometimes back up large files, and batch process large amounts of files,
I also try to perform other time consuming tasks such as downloads etc.

I would like my computer to play dead.

I would like it to appear off when I leave it.

I do not want anyone to turn it off because they think it is not being used. (or that they are saving the earth by turning off my PC when
they leave a gamesystem on for days even when not using it.)

I also do not want anyone to see what I am working on.

I would like to redirect the keyboard keys to avoid the use of the three finger salute (ctrl, alt, del).

It would be best if the keys were all dead/redirected (but the dead/alive hotkeys )

I would also like to kill the trac pad, though leaving the wireless mouse alone would be good.

I would like to mute all sound, and turn off the screen,
alternately I would like to be able to put up a Windows is updating wallpaper/screensaver to try and avoid people messing with my computer.

To use the windows is updating wallpaper it would be best if all desktop links were hidden.

Also if it is possible to send function keys I would like to send function key strokes: Fn F1 (turns off all lamps)