Messages

76

General Software Discussion / Re: What Android Apps Do You Use?

« on: October 16, 2013, 11:14 AM »

Some application i use are:
1.Andozip
2.Notepad
3.Evernote
4.Facebook
5.Wechat
6.App locker
7.outlook for Android
8.gmail

77

General Software Discussion / Re: Structure for HTML 5!

« on: October 14, 2013, 12:16 AM »

This is something i wanted, the structure layout, taking one step at a time. Taken straight from lynda.com

Renegade thank you for keeping an open mind.

78

General Software Discussion / Structure for HTML 5!

« on: October 12, 2013, 09:27 AM »

Hello folks, i have given up trying to understand C++ i think i am quite old and don't have patiece to understand those structures, which are very small.
But lately i have got an interest on HTML5 and i have some video demonstrations to help me out.
I got some material at hand to give me a kich start.
What i want to know , it the fundamental structure of the components like chapter, which i should be familiar, notlike the title and body etc. But the components on how it is layed for one to begina and go step by step.
Hope it is understandable. Can anyone help me out.

79

General Software Discussion / Re: wont boot normally!

« on: October 01, 2013, 03:51 AM »

Tell us more -- are you saying it boots successfully it just takes a long time?

-mouser (October 01, 2013, 03:29 AM)

Yeah that's the problem.  It boots but takes a longer time.
I tried booting in safe mode , on both the OS's: which it does. I tried chkdsk from xp recovery disc

Since I do not use Antivirus, I rely solely on virtualization amd restoration of the images.  This problem is un-understandable, I m tired of restoring, few problem should have fewer solutions for. Also before this I got a lot of BSOD's .

As of now, only other thing I can think is of the graphic card, being loose.

80

General Software Discussion / wont boot normally!

« on: October 01, 2013, 03:23 AM »

Hello,  if someone can help me here regarding computer start up. This happened just today:
 I m using Winxp, and I had restored an xp image 2 days back.
 But today I am experiencing the lag in normal boot times.  The normal boot time ws 4/5 minutes: but now it has extended to 10/11 minutes and more

I m on a dual boot, (xp/7) but I use xp more
I think it is a hardware issue. The problem is effecting two Os. Which is strange


Any suggestions welcome.
 

81

General Software Discussion / Re: Can someone extract these swf files.

« on: September 02, 2013, 08:55 AM »

Yeah that is the other option i had in my mind, but the reason behind downloading the swf video was to take some snapshot of the clips as it played.
Some action are pretty cool. If you know what i mean.

82

General Software Discussion / Re: Can someone extract these swf files.

« on: September 02, 2013, 12:29 AM »

hmm no one know's about how to download this ecrypted swf video files, its pretty puzzling come to see .
Well anyone holler if you think you can help.

83

General Software Discussion / Can someone extract these swf files.

« on: September 01, 2013, 03:06 AM »

Hello folks,
     i want to request to anyone who is very good at extracting swf file that is being played at the browser. Although i have downloaded couple of swf files by viewing the Page source and copy/paste the link to a new browser and ( save the page as): seems to do the trick. But some swf video file seems to be encrypted. Like when i do the procedure mentioned above it downloads the swf video file, but when i dis-connect the net and try to play the swf video it say its stolen and refuses to play further and redirects a user to its website.

Here is one link: its a STICK VIDEO, hope you know the STICK character.
THE STICK VIDEO CASTLESERIES
I have managed to download this swf video but it says, its STOLEN, can anyone know the process to extract the clean swf file.

84

General Software Discussion / Re: Dopus 10 : Some question about it.

« on: August 02, 2013, 03:27 AM »

yeah i fixed it by uninstalling the dam software and then re-installing it back, seems to work pretty fine now. 

85

General Software Discussion / Re: Dopus 10 : Some question about it.

« on: August 02, 2013, 12:00 AM »

Hello 4wd, i am not about to find the column, in Dopus, 10.5.2, its like it does not exits.

86

General Software Discussion / Re: Dopus 10 : Some question about it.

« on: August 01, 2013, 09:40 AM »

I couldn't stop noticing this changes that occured after i try to tweak some settings , for viewing some images.
All the long file names has been reduced , please see the snapshot. I tried restoring the setting to last best known setting i had for my setup, but the long file name still doesn't change.
Is their any other way to fix this.

87

General Software Discussion / Re: Dopus 10 : Some question about it.

« on: July 27, 2013, 09:45 PM »

To remove buttons from toolbar:
right-click outside of a button (can be tricky on hi-res or small screen), click on customise - a dialogue opens. Drag the button you want to remove onto the dialogue. That should remove it. (I'm sure you can also reach this dialogue via the menu but forget how.)

-tomos (July 27, 2013, 04:21 PM)

Thank you of replying, i got the idea of switching from one tab to another by Ctrl+Left/Right Arrow key and its working great. Create tab: Ctrl+T, Close Tab: Ctrl+W (this is something that needs to be assigned , default key was Ctrl+F4).
I got it, after pressing the customise button, i simply right clicked the FTP and FAVOURITE button and proceeded to delete it, at the same time the CUSTOMISE BUTTON being opened. That was a little tricky, take a look at the screenshot , now it looks more like windows explorer and functional.

88

General Software Discussion / Re: Dopus 10 : Some question about it.

« on: July 27, 2013, 12:51 PM »

Hello again, thought i would continue with my question and answer session about Dopus in an old thread rather then creating one, at the moment i am using  DOpus 10.5, and i want to switch between tab that was created by using the Hotkey Ctrl+T,  does anyone know the hotkeys to"

• please see the snapshot below: could i remove the FTP button and Favourite button from the toolbar.

Awaiting some suggestions.

89

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 11, 2013, 04:29 AM »

Just restored my PC, since it already had a lot of bloats , just fixed the drivers issue as well. Did everything right, so that error wont pop up.

Case closed.

90

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 07, 2013, 10:28 AM »

May i know which version you are using......

91

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 07, 2013, 06:59 AM »

4wd just wanted to ask that Dopus  snapshot, are u under Winxp or Win7, the toolbar colour looks like u are inXP.

92

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 07, 2013, 02:48 AM »

Code: Text [Select]

1. [i]([url=https://www.donationcoder.com/forum/index.php?topic=35113.msg327980#msg327980]see attachment in previous post[/url])[/i] [i]([url=https://www.donationcoder.com/forum/index.php?topic=35113.msg327980#msg327980]see attachment in previous post[/url])[/i] [i]([url=https://www.donationcoder.com/forum/index.php?topic=35113.msg327980#msg327980]see attachment in previous post[/url])[/i] etc, etc
2.  [i]([url=https://www.donationcoder.com/forum/index.php?topic=35113.msg327980#msg327980]see attachment in previous post[/url])[/i] [i]([url=https://www.donationcoder.com/forum/index.php?topic=35113.msg327980#msg327980]see attachment in previous post[/url])[/i] etc, etc

Number corresponds to attachment.

-4wd (June 07, 2013, 02:20 AM)

Thank you 4wd, just corrected the attached images...
I rest my case, i will use the Samsung suite that is working properly on Winxp partition.

93

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 06, 2013, 11:22 PM »

Devices and Printers (in control panel - Like where your printer drivers are listed) Not Device Manager in Administrative tools. Most media devices (which it qualifies as if it's not in storage mode) will show up there in Windows 7.

-Stoic Joker (June 06, 2013, 11:35 AM)

Almost too good to be true, i saw the mounted icon in the Device and printer and tried the troubleshoot and the properties and tried everything like update software, it did a short search from the net but wasn't able to find any drivers. And the rest of the function was pretty much much like in Device Manager.

BTW, most, (if not all), smart phones when they're plugged into a computer mount a virtual CD that usually has all the needed drivers on it or possibly provide links to get them.

eg. Here's the one from my Huawei
 (see attachment in previous post)
Who knows, you might get lucky.

-4wd (June 06, 2013, 09:06 PM)

Mine is not a smart phone , just a simple GSM phone with EDGE feature and a simple camera. I didn't find any thing like a mounted virtual cd from My Computer, i understood what you meant. But their website too doesn't support downloading independent drivers, it is all inbuilt in the device which would kick start the driver installation when the device is connected to the PC when connected for the first time. Its really a handicap, and i wouldn't ask for more, since on my other XP partition it is working but i would still love to see it work in Win7 even after driver installation failure.

PS: why is their a message saying [ ERROR: SPECIFIED ATTACHMENT MISSING ] when i attach an image, am i doing something wrong.
The rightway would be:

[Select]

[attachtimg=123] [attachtimg=1]or [attach=123][/attach][attach=1][/attach]

Can someone correct me.

94

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 06, 2013, 10:36 AM »

Their is no troubleshoot from the Device manager and their are no driver software in the Samsung pc studio Disc that came with the mobile device, what a helpless situation, fortunately i had it installed properly in Winxp since i am on a dualboot, i am able to access the Samsung pc studio and all its feature, but i was wondering since i missed on Win7 , is their any other way to reinstall the drivers, uninstalling,disabling and  didn't help too and their is no option to rollback since it did not install properly.

95

General Software Discussion / Re: Samsung device drivers failed to installed

« on: June 05, 2013, 10:21 AM »

Can anyone provide a solution to this problem

96

General Software Discussion / Samsung device drivers failed to installed

« on: June 05, 2013, 04:25 AM »

Hello, i do not know if this is the right place to ask this question , i have a samsung mobile, i have installed its default Samsung PC Studio application suite that enables a users to sync and explore mobile content and movies and videos etc.

Their was an option to use that mobile as mass storage or Samsung pc studio mode from the phone menu :when the devie is connected to the PC.
On one occassion i had left the default option on mass storage mode,during the first connection with the pc, it began to install the drivers which it failed to do and then i changed to Samsung pc studio mode from the phone menu that too fails to load the necessary drivers.

It functions as any usb device although, please see the snaphot.

97

General Software Discussion / Re: Windows Batchfile can't recognize long file name...!!!!

« on: February 21, 2013, 07:05 AM »

Playing with the Start command, these will run a program:
Start c:\progra~1\pathto~1\filename.exe
Start "" "c:\program files\path to a program\filename.exe"

These open a new CLI with the title set as given:
Start "c:\progra~1\pathto~1\filename.exe"
Start "c:\program files\path to a program\filename.exe"

The first parameter encountered with quotes is assumed to be a window title.

-4wd (February 19, 2013, 07:55 PM)

Thank you 4wd, your suggestion really helped and it was something i was really looking to for a solution, and although i go through many suggestion for this post none, seemed to help.....but i am really thankful to those who tried to provide a solution and keeping an open mind, really their were literally 10-15 post's i found through Google and i ended up here for a suggestion that worked. 4wd thank you man, u helped with a solution time and again. Great work , hope you would continue this work for many years to come.....
i have the parent directory containing all the batch files and i set them in the environment variable and use the run feature to run the batch file directly, really saves ones bell.

98

General Software Discussion / Re: Windows Batchfile can't recognize long file name...!!!!

« on: February 19, 2013, 07:00 AM »

Thank you all for replying to this question, i was well aware of using  " " in between the folder structure containing spaces,
I found few things that didn't work inspite of using " " for opening files and folders.
I really have few folders with spaces that needs to be opened using a bat file,also few programs containing folder structure with spaces.

Can someone literally try and solver this issue.

99

General Software Discussion / Re: Windows Batchfile can't recognize long file name...!!!!

« on: February 09, 2013, 11:14 PM »

i think i tried that, and i have to recheck that again.

100

General Software Discussion / Windows Batchfile can't recognize long file name...!!!!

« on: February 09, 2013, 10:53 PM »

Hello folks,
        can anyone provide an answer to these questions, lately i have made few batch file to open portable application and folders, really saves one's bell and i made few winrar files but after playing with it, i realized these batch file would not work for files and folders having spaces and lots of dot between them. Let me give an example:-
       
1.C:\Program Files\Bulk Rename Utility
2.F:\MY SOFTWARE\INSTALL\Microsoft .NET Framework 4.0.30319.zip
3.F:\MY SOFTWARE\INSTALL\Zortam Mp3 Media Studio PORTABLE 14.45.rar     
4.F:\MY SOFTWARE\INSTALL\Auslogics Disk Defrag Professional\diskdefrag.exe


Now Windows batch file would not recognise these type of folders, nor can it open files( of portable application ) with spaces and it can't compress too. Why???
Is their any way round to go about these problem, or do i need to use certain third party software to open or compress these files and folders.

The error i get is:
Windows cannot find
f:\software\Auslogics Disk Defrag Professional\diskdefrag.exe . Make sure you typed the name correctly, and then try again.

So these are the directory structure, the default commands like cd,start, md would not work???

Any suggestion is greatly welcomed.