Messages

1

UrlSnooper / Re: not sniffing anything

« on: October 03, 2005, 12:42 PM »

Hi Mouser

Congratulations!!!

Version 2.04.04 works with "Scan only this computer" switched on.  Without this option switched on I still wasn't able to sniff anything.  I guess this behaviour is like expected.

As you mentioned, I only installed URLSnooper and kept WinPcap untouched.

2

UrlSnooper / Re: not sniffing anything

« on: October 03, 2005, 09:09 AM »

Hi mouser

I will test later today and report.

3

UrlSnooper / Re: not sniffing anything

« on: October 03, 2005, 02:49 AM »

Hi mouser

Anything new on this issue???

4

UrlSnooper / Re: not sniffing anything

« on: September 21, 2005, 02:01 PM »

If "promiscuous mode" is checked, ehtereal doesn't work either.  It looks like you are on the right way.

5

UrlSnooper / Re: not sniffing anything

« on: September 20, 2005, 03:09 PM »

Hi Mouser

Thanks for your reply.

I'm using WinPcap 3.1.  I uninstalled and reinstalled WinPcap. I rebooted my PC 2 times.  I tried using URLSnooper right after rebooting the PC.  Nothing, not even one package was captured.  Closing URLSnooper and starting Ethereal.  Here there are the packets.  Closing Ethereal and retrying URLSnooper.  Same result, not even one URL gets captured.  (Where do I have to check the packet counter???)

By the way, I'm using the build-in wireless network card of my IBM Thinkpad T41 notebook.  To show my settings, I took some screenshots.  Hopefully you could see those in the attachment.

Since Ethereal works just fine, I still don't think the problem is WinPcap or my hardware.

Thanks a lot for your support.

Best regards
Stefan

6

UrlSnooper / not sniffing anything

« on: September 14, 2005, 02:12 PM »

Newbie question !!!

Downloaded URLSnooper 2 yesterday.  The download link showed version 2.04.01.  The about box tells me version 2.04.03.  And the window title bar shows 2.04.02.  ???

Nevertheless, the problem is I can't snoop any URLs at all.  After choosing the network adapter and start Sniff Network I can't even see URLSnooper counting packets.  Using Ethereal packet sniffing on the same network adapter works just fine.  Makes me guess the problem is not WinPcap or non supported hardware.  By the way, during the usage of URLSnooper, Ethereal was not running.  Tried with option "Only scan this computer" switched on and off.

Running Windows XP Professional fully patched, except SP2.

Any ideas???

Thnaks for your help.